Runner diameters: 0.35-2.5m
Suitable water head: h=10-300m
Capacity of the generator unit: 160-20000kw
The speed range of the turbine: 150-1000rpm
The power output ranges from 160kw to 20000kw, runner diameters are between 0.5 and 2.5 meters.
The speed range of the turbine is from 150 to 1000 rpm.
excellent peak efficiency.
high efficiency also at partial water flow down to about 50%.
2 or 4 bearing gen-set arrangements.
bearings rated for more than 100 000 hours of operation.
guide vane control electrically or hydraulically.
complete range of specific speeds for runner design allows optimized matching to synchronous speed.
Runner diameters: 0.6-3m
Suitable water head: h=3-30m
Capacity of the generator unit: 160-20000kw
The speed range of the turbine: 60-750rpm
* the propeller type is with a vertical axle and fixed runner, blade angle can not be changed during operation mode, the efficiency curve is steep and this type is generally suitable for power station that has water head with slight change or its operating units can be adjusted according to actual load change.
* the kaplan type is with adjustable runner controlled by oil servomotor and moved according to the load/head change to ensure higher average efficiency, the efficiency of some kaplan turbine is higher than 94%.
Runner diameters: 0.8-3.3m
Suitable water head: h=2-30m
Suitable flow: q=1.62-53.6m3/s
Capacity of the generator unit: 35-8700kw
* it has large overflowing, good flow characteristic and high efficiency etc. Merits.
* the runners are fixed or can adjust manual the efficient turbine of this kind can produce a large quantity of water flow which passes unimpeded.
* all are horizontal type, the water enter into the turbine along the axial direction.
* compared with vertical axle flowing type units, the factory building is little in excavating amount, and hydropower station water conservancy project investment can save 10%- 20%, equipment investment saves 5%- 10%.
Every product, equipment, service and whole-system will be specially designed and customized according to each customer's or project's requirements. If you need us to design a proposal for your project, please send us your specific requirements now, our sales engineers will contact you the soonest.
Suitable water head: h=40-300m
Suitable flow: q=0.35-1.166m3/s
Capacity of the generator unit: 100-1250kw
The speed range of the turbine: 600-1000rpm
* its nozzle has a 22.5161227;angle with the runner rotation surface.
* the runner is heavily pushed by water from pressure pipe that is switched to high speed jet flow through spray nozzle, imposing the runner in inclined direction.
* the runner works by water flow entering one side of vane and coming out from its other side, pushing the runner to rotate, the runner then drive the generator through coupler to produce electricity.
* it can reliably operate with simple structure, easy inspection and maintenance.
* inclined jet type turbine has as simple structure as the pelton turbine, reliably operate with simple structure, easy inspection and maintenance.
* it has the merit of high specific speed, wide application range, easy to coupling and direct connation to the generator.
Addnew's inclined jet hydro turbines (turgo turbines) is one type of impulse turbine. It is well developed and widely used in mountain area.
Suitable water head: h=100-1000m
Suitable flow: q=0.13-5.81m3/s
Capacity of the generator unit: 200-20000kw
The speed range of the turbine: 250-1000rpm
* the runner works by being heavily pushed with jet flow that is switched through injection nozzle from high-pressure pipe. The feature is that is works by impulsing the runner to rotate with kinetic energy of water flow, and the jet center of nozzle and the runner are in the same plane.
* it is divided into vertical type and horizontal type two kinds. Horizontal type each has 1-2 runner, each runner has 1-2 nozzle, vertical type each has only one runner, each runner has 2-4 nozzles.