General:
- escher wyss, two fourdriniers, base ply & top ply each with step diffusor headboxes
- installed in 1986, complete with recent rebuilds.
- 4500mm trimmed width
- white top & linerboard basis weights 100 – 200 gsm; sack kraft 60-160 gsm
- 470 tons/day, speed range 350 – 465 m/min, drive speed of 450 m/min
- complete, and in excellent condition
Approach flow system:
– refiner: 6 x 34'' sprout waldron double disk 1986
– cleaner top ply: enso twins 4 stages 1986
– cleaner bottom ply: richard berg 4 stages 1986
– primary screen: ahlstrom centriscreen 1986
– secondary screen: jonsson/sunds vibration type, 1986
40' container, sea worthy packing
Used 2.5m (100”) wide 2.25m (88")trim paper machine by gorostidi and bruderhaus. Producing mg papers, completely overhauled in 2004. Producing 18 to 140 gsm basis weight grades at a maximum design spe
40' container, sea worthy packing
A very versatile Board Machine, operating width 4200 mm, maximum speed is 450 m/min, producing
fluting, liner, plasterboard liner, brown board and other grades. Grammage produced 110 to 600 gsm.
Commissioned in 1988, latest upgrades in 2000-s.
Installed production capacity is up to 450 t/day and the mill produced in excess of 110,000 t/year.
3 Stock Preparation Lines
Line 1 – bottom layer.
Horizontal pulper, 200 TPD, equipped with ragger, waste paper conveyor, two stock pumps with motors,
stock chest, two more stock pumps with motors, three HD cleaners, secondary sorting pulper (200TPD),
stock chest, two pumps, twin pressure screen (holes diameter 4 mm), rejects to chest, rejects pump, two
vibrating screens (holes 6 mm), stock chest, stock pump, deflaker, twin disc refiner, stock chest with
agitator, machine stock chest. All Polish and Russian built.
Line 2 – middle layer.
Horizontal pulper, 200 TPD, equipped with ragger, waste paper conveyor, two stock pumps with motors,
three HD cleaners, stock chest, two stock pumps, secondary sorting pulper (200TPD), stock chest, two
pumps, three twin pressure screens (holes diameter 2.6 mm), stock chest, stock pump, hot dispersion plant,
screw press, steam channel, disperger, thickener, stock chest, stock pump, 4 deflakers, 2 disc refiners, stock
chest with vertical agitator, stock pump, machine chest, two thickeners, disc filter. All Polish and Russian
built.
Line 3 – surface layer.
Horizontal pulper, 200 TPD, equipped with ragger, two stock pumps with motors, stock chest, 2 stock
pumps with motors, two HD cleaners, stock chest, two pumps, three disc refiners, stock pump, machine
chest.
All Polish and Russian built.
Pressure screens for formers
7 Tampella pressure screens complete with motors
Rejects screens 7 vibrating screens PS3100 (Finland)
Board machine
Seven Escher Wyss vacuum formers, stainless steel, 4-zones vacuum.
First press suction press with pneumatic loading.
Couch press.
Combi-press.
Second press.
Automatic felt feeding horizontal.
Automatic felt feeding vertical.
Tail feeding - air feed.
Rope feed system.
93 drying cylinders, 1500 mm diameter, face 4910 mm.
2 cooling cylinders, 1500 mm diameter, face 4910 mm.
Pocket ventilation system.
Size press: 1st roll diameter 800, face 4680 mm; 2nd roll diameter 800, face 4680 mm.
Reel-up.
NOTE: Some Drive Cabinets and Control Panels have been stripped of some components. Some power
supply components and cables are missing.
The mill stopped production in 2007.
Rewinder
Rewinder, 4500 mm, speed up to 1200 m/min.
40' container, sea worthy packing
*used voith paper machine. Manufactured 1965.
*hydraulic headbox type 2, installed in 1974 by voith. Slice: 3260mm. *wire width: 3450mm. Trim width: 3000mm.
*egoteur diameter: 400mm.
*dryness after couch roll approximately 28%.
*open draw to first press. First press: suction roll as under roll even blind drilled.
*dryness after first press approximately 40%.
*second press: solid reverse press. Dryness after second press approximately 46%.
*third press: solid press. Dryness approximately 50-52%.
*fourth press: offset press predryer ir on dryer 2 approximately 900 kw. Ahead of presnip is a steambox from vib.
*predryer section consists of (18) dryers. Diameter 1500mm x 3300mm. Pressure 3, 3 bar. Billblade coater with following air =-turn from spooner.
*coating quantity total up to 26g/m2.
*intermediate dryer section (7) dryers, diameter 155mm x 3300mm. *coating station for top and back built by kmw, rebuilt 1994 by btg to abc as run today with bentblade.
*included ir from solaronica/irt 450 and 500 kw.
*after dryers (17) pieces, the first (2) cylinders without steam with chromium-plated area, the rest diameter 1500mm x 3300mm. Pressure 2, 5 bar. Mat
*on line calender form kuster with (2) polymer covered rolls, (1) is an s-roll. Nip is soft-soft. The calender is from (70) ties. Automatic *tambour turning with pope from umv built 1996. Drive from stromberg. Each dryer has own ac motor. Design speed 500m/minute. Electrical, the machine can run faster, but depending on the open draw (no pick up) the speed is limited to 400m/minute. Grammage: double coated wood-free paper 100-300gsm.
40' container, sea worthy packing
Paper machine producing coated one side wood free speciality paper. Production 55, 000 t/year, 20-26 t/hour. Machine speed maximum 800 m/min, grammage 40 - 120 gsm, wire width 2760 mm, trimmed reel width 2520 mm, jumbo reel diameter 2100mm, jumbo reel weight 10 t, maximum coating weght 14 gsm, solid content after press section : typical value 43%.
40' container
