Applicable technical parameters
Tube inner diameter: 50 ¨c200mm
Tube thickness: 2-15mm
Paper plies: 25plies ( can be adjusted, depends on paper material and tube thickness.
Paper gramme: 150-600gsm
Machinery speed: 0-15m/min (depends on paper material , making tube¡¯s size and operator skill
In-line cutting unit:single circular knife
In-line cutting length:1000-4000mm
Machinery consists detailed description:
1. Adopt hang-type operation panel, more convenient for operation
2. Adopt infrared ray set cut length, convenient and accurately
3. Mechanical loading paper reels, reduce labor force
4. Paper ply tension control system, cylinder press paper ply firmly, can adjust tension freely
5. Supply gluing pots and pressure tension control system adopt single or double side gluing depends on tube required strength
6. Flanged shaft with flexile design, suit with tapered mandrel, can do fine-turning to tube inside diameter.
7. Machine frame is with the anti-deformation treatment, ensures machinery running stability and working precision.
Note: above are just parts standard technical parameters of ljt-4dnc paper tube machine for reference for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks.
Mainframe dimensions:5000*1650*1900mm
Weight:7ton
Detailed product description
Hjq-d paper tube recutter: cutting long tube into short ones.
1. I.D.: 40-150mm
2. Thickness: 3-15mm
3. Length: 90-1600mm
Hjq-d paper tube recutter:
Applicable technical parameters:
1. Inside diameter: 40-150mm
2. Parent tube length: 1600mm
3. Min.Recut length: 90mm
4. Wall thickness: 3-15mm
5. Knives: 11sets
6. Working air pressure: 0.6mpa
7. Operator: 1 person
Main functions:
1. Manually uploading the paper tube and unloading the paper cores
2. Manually adjust the distance of knives.
3. Cut by 2 knives continuously almost in the same time.
By container according to the machinery size.
Dimensions:2500*700*1300mm
Weight:500kg
Applicable technical parameters
Base paper material
Kraft paper, brown paper, bobbin paper
The o.D of parent roll
1200mm(can made in order)
Paper weight
200- 600gsm
The o.D of rewind roll
1200mm
The width of parent roll
1600mm(can made in order)
Machinery speed
0-200m/ min
The slitting width of rewind roll
Min. 90mm
Rewinding mold
Centre rewinding
Machine functions:
1. Equips lifting and clamping mechanical arms to lift, clamp and adjust jumbo paper roll, improving efficiency and reducing manual;
2. Motor-driven to lift knife carriage. Keep certain distance between knife carriage and rewind rolls, ensure precise slitting;
3. Adopt big knife carriage, reduce knife-jumping phenomenon largely, ensure quicker and stable slitting process;
4. Adopt automatic pneumatic unloading technical. Avoid low efficiency by human working, reduce working intensity;
5. Adopt single-shaft center rewinding mold, reduce compressive strength requirement, ensure better rewinding effect;
6. Adopt human-machine interface specialized operation system, more convenient operation;
7. Digital control tension control system, do not need manual adjusting tension, ensure good slitting rewind effect.
Note: above are just parts standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks.
Mainfram:3100*2300*1500
2.5~3ton
Detailed product description
Mb-c paper core end grinding machine: smooth tube ends.
1. Id: 76-152mm
2. Thickness: 5-8mm
3. Length: 57-160mm
Mb-c paper core end grinding machine:
Mb-c paper tube grinding machine, tube ends burnishing, trimming, polishing: for trimming paper tube ends to be smoothly, such as dty tubes, poy tubes.
Applicable technical parameters
Tube i.D.
76-152mm
Working air pressure
0.6mpa
Tube wall thickness
5-8mm
Motor
1.5kw
Tube length
57-160mm
Operator
1 person
Speed: 35-45pcs/ min (speed changed depends on tube size)
Machine functions:
1. Cylinder drive molds to trimming and chamfering tube two ends
2. The molds are with heat-processing;
3. Machine frame and door are made of cold galvanizing plate;
4. The whole machine frame with affine deformation processing;
5. The four holes for grinding heads with high concentricity and straightness processing;
Note: above are just parts standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, then we will give you our advise and machine details, thanks.
1600*1150*1150mm
500kg
By container according to the machinery size.
Applicable technical parameters
Tube i.D.:
25-65mm
Tube wall thickness:
2-5mm
Paper plies:
Can be adjusted depends on paper and tube wall thickness, generally 420gsm= 0.6mm thickness/ ply
Paper gramme:
250-530gsm
Machinery speed:
1-10m/min (depend on tube sizes, material quality and operator skill )
In-line cut off length:
800-4000mm (or more)
Machine consists
Paper reel stand:
Sz type
Cascade glue unit:
Gt type
Spiral winding part:
Three drums
In-line cut off unit:
Single circular knife unit
Machine functions
1) adopt infrared control in-line cut length;
2) adopt hang-type operation panel, very convenient;
3) adopt japanese okazaki's cross mold paper reel stand, depends on tube wall thickness to set its number;
4) adopt japanese okazaki's roller gluing mold, lower requirement to paper quality;adopt single or double side gluing depends on tube strength requirement;
5) machine frame with anti-deformation treatment, ensures stable run and precision.
Note: above are standard technical parameters for reference; for confirm the most suitable mold, please tell us your practical parameters and requirements by email, thanks.
By container according to the machinery size.
3200*1200*1600mm
2.5ton