1, Product performance:
This product has the advantages of high conversion rate, stable crystal form, low impurity content, significant true ratio, and reduced ignition. Its product has low longitudinal and transverse shrinkage, excellent electrical insulation performance, wear resistance, corrosion resistance, and high temperature resistance.
2, Product Usage:
The product is widely used in various abrasive tools, wear-resistant fillers, and for preparing various ceramic grade and refractory grade micro powders. It is used as a raw material for high aluminum, high-purity structural ceramics, electronic components, high-frequency insulation ceramics, and high aluminum ceramic balls.
Aluminum Hydroxide for Solid Surface, the appearance of white crystalline powder, non-toxic,
tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size
distribution. It has low impurity content, good stability, high whiteness, uniform particle size and
good dispersibility.The advanced equipment and technology are used to make the shape of the
product particles closer to the spherical shape. The viscosity and oil absorption rate are maintained
at low levels. Increase the amount of aluminum hydroxide to save resin.
For Artificial Marble and Acrylic Solid Surface:
ATH Filler for Solid Surface can improve the anti-leakage, arc resistance, wear resistance and
anti-aging performance of the products.
For SMC(sheet molded plastic),BMC(bulk molding compounds):
Ground Aluminum Hydroxide Ath Powder is mainly used in BMC and SMC production.
According to the different sizes of Aluminum Hydroxide Powder,it is also can be used in toothpaste
friction agent, low-voltage insulation devices, plastic, rubber, glass fiber reinforced
plastic,adhesives, grille, carpet and other industries which required flame retardant.
Package:
H-WF-5/8/10 25kg/bag, 24 Tons without pallets/ FCL,20 Tons with pallets/20 FCL
H-WF-14/25/25msp/50/90 25kg/bag, 27 tons without pallets/2FCL,24 Tons with pallets/20 FCL
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
It is a high range water reducer, high concentration naphthalene-based superplasticizer, also named Naphthalene Sulfonate Formaldehyde Condensate SNF, PNS and FDN etc.
Na2SO4 has 3 grades:5% 10% 18% for exporting markets,in domestic we also have 3% 23% Na2SO4 content FDN.It contains no chloride, non-corrosive to steel bars, non-poisonous, odorless, and non-flammable.
Naphthalene Sulfonate Formaldehyde Condensate (SNF), also known as Poly Naphthalene Sulfonate (PNS) and Formaldehyde Sulfonate Condensate (FDN), is a highly effective water reducer and superplasticizer commonly used in the construction industry to improve the workability and strength of concrete.
Item Company standard
Jh pce
Appearance Transparent pale yellow liquid
Density (23
Ph value (23¡é) 6
Solid content (%) 50%
Water reducing rate (%)25
Chloride content
Na2so4content (%)5.0
Alkali content (%)5.0
Formaldehyde content (%)0.05
1.1ton/drum, 210kg/drum.
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.
Polycarboxylate Superplasticzier we produce types as below:
1. High water reducing type
(normally they can be satisfied for concretes' requirements):
JH03 basic standard type(under most exported.)
JH09 viscosity adjustment is better than JH03,water reducing ratio is lower than JH03,(suitable for high clay content ratio of cement,under most exported.)
JH15 water reducing ratio is higher than JH03,performance is better than JH03,suitable for high strength concrete.(New Research and technology higher than JH03.)
2. Water reducing and slump retention type
JH02 water reducing and slump retention type.(New Research on base of JH03.)
3. High slump retention type
JH06 basic standard type,mix with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH06K higher slump retention performance than JH06,price is higher than JH06,mixing with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH16 Better performance and different technology with JH06 and JH06K,mixing with JH03,JH09 and JH15 if concrete's slump retention is not satisfied.(New Research and technology to satisfy JH15.)
Exporting loading: 20'GP container loading:
1. 220kg/drum, 80 drums
17.6 T
2. 1150kg/drum,20 drums
23 T
3. 20-25tons/flexitank.
20-25 T
Aluminum hydroxide flame retardant is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant.It can endow products with flame retardant, smoke elimination, filling, antistatic and other characteristics. The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc.
� � � It is suitable for flame retardant fields such as rubber and plastic products, such as mine conveyor belt, mine air duct coating cloth, hose, rubber plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, building materials, damping paste, damping plate, electronics, etc.
Flame/Fire Retardant:
� The initial decomposition temperature of aluminum hydroxide is about 205 �ºC. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardance. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Package:
1.JR-ATH-1andJR-ATH-2
25kg/bag, 13-15 Tons without pallets per 20GP.
25kg/bag, 26 Tons with/without pallets per 40HQ.
2.JR-ATH-3andJR-ATH-4
25kg/bag, 18 Tons without pallets per 20GP.
25kg/bag, 26 Tons with/without pallets per 40HQ.
3.H-WF-5/8/10 25kg/bag, 24� Tons without pallets/20'FCL,20-22 Tons with pallets/20'FCL
H-WF-14/25/25msp/50/90 25kg/bag, 27 tons without pallets/20'FCL,24-25 Tons with pallets/20'FCL
Aluminum Hydroxide for Solid Surface, the appearance of white crystalline powder, non-toxic,tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution. It has low impurity content, good stability, high whiteness, uniform particle size and good dispersibility.The advanced equipment and technology are used to make the shape of the product particles closer to the spherical shape. The viscosity and oil absorption rate are maintained at low levels. Increase the amount of aluminum hydroxide to save resin.
For Artificial Marble and Acrylic Solid Surface:
ATH Filler for Solid Surface can improve the anti-leakage, arc resistance, wear resistance and anti-aging performance of the products. For SMC(sheet molded plastic),BMC(bulk molding compounds):
Ground Aluminum Hydroxide Ath Powder is mainly used in BMC and SMC production. According to the different sizes of Aluminum Hydroxide Powder,it is also can be used in toothpaste friction agent, low-voltage insulation devices, plastic, rubber, glass fiber reinforced plastic,adhesives, grille, carpet and other industries which required flame retardant.
Package:
H-WF-5/8/10 25kg/bag, 24 Tons without pallets/20 FCL,20 Tons with pallets/20 FCL
H-WF-14/25/25msp/50/90 25kg/bag, 27 tons without
Super fine Powder Aluminum Hydroxide
Aluminum hydroxide is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant.It is suitable for flame retardant fields such as rubber and plastic products, such as mine conveyor belt, mine air duct coating cloth, hose, rubber plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, building materials, damping paste, damping plate , electronics,flame retardant resin.It can be widely used in electrical LDPE cable material,LSZH wire compound,LSZH cable,Silicone rubber,Rubber insulation,Silastic module,Foam insulation,Paper-making,PVC industry,Pouring sealant,Shell of car/phone/plane/computer,conveyor belt, etc. The flame retardant effect of aluminum hydroxide after activated treatment is more better. (the ATH dosage increases after treatment, for example, the normal dosage of untreated 1 micron
size aluminum hydroxide is 30-40%, the dosage can be increased to about 50% after activated treatment).
It can endow products with flame retardant, smoke elimination, filling, antistatic and other
characteristics. The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc. The initial decomposition temperature of aluminum hydroxide is about 205 . Aluminum
hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardance. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals.
Introduction
Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle
size distribution, low impurity content, good stability, high whiteness, uniform particle size and good
dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder
without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition
temperature of aluminum hydroxide is about 205 â??. Aluminum hydroxide flame retardant can
release a large amount of water vapor when heated. A large amount of water vapor can store heat
and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier
between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which
has no corrosion to metals. Usage
Aluminum Hydroxide 14-100um filler powder can be used for MMA and UP solid surface
and artificial marble that used for buildings and home decoration. Aluminum Hydroxide 1-10um flame retardant powder can be used for rubber hose, rubber
plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, electrical LDPE
cable material,LSZH wire compound,Silicone rubber,Silastic module,Foam
insulation,Paper-making,PVC industry,Pouring sealant,Shell of
car/phone/plane/computer,toothpaste friction agent, low-voltage insulation devices,glass fiber
reinforced plastic,adhesives, grille, carpet and other industries which required flame retardant.
Package
H-WF-8/10 25kg/bag, 24 Tons without pallets/20 FCL,20 Tons with pallets/20 FCL. H-WF-14/25/25msp/50/90 25kg/bag, 27 tons without pallets/20 FCL,24 Tons with pallets/20 FCL.
Aluminum hydroxide flame retardant is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant. It can endow products with flame retardant, smoke elimination, filling, antistatic and other characteristics.
The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc.
1,Blend dosage range is 0.5-1.2%. Appropriate blend dosage can be selected according to project object and the materials used during application.
2,FDN powder is recommended to be applied in solution. It can be used in dry form, but make sure mix it thoroughly with concrete.
3,If this product is applied with adoption of stagnant water blending method or post-blend approach, water reduction and dispersion will be better.
4,This product can be formulated with concrete additives of other varieties. It can be "double blended" with blending materials such as fly ash, ground slag, etc. But the blend dosage shall be calculated based on the total of cementing materials.
5,When this product is used for the first time or cement variety is changed, concrete trial preparation shall be conducted according to the adopted materials and construction requirements in the field. Construction mixing rate shall be adjusted based on testing result to serve as instruction for construction blending.
PCE Polycarboxylate superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad.It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.
With initiating systerm and reaction conditions,we achieve high adaptability.Comparing with PNS and other superplasticizer, PCE has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
Aluminum hydroxide flame retardant is a kind of filling flame retardant, mainly composed of Al (OH) 3. Aluminum hydroxide micro powder is white powder without secondary pollution. It is an inorganic environment-friendly flame retardant.It can endow products with flame retardant, smoke elimination, filling, antistatic and other characteristics. The utility model has the advantages of low cost, high performance, good stability, no volatilization, no corrosion to equipment, high decomposition temperature, etc.
It is suitable for flame retardant fields such as rubber and plastic products, such as mine conveyor belt, mine air duct coating cloth, hose, rubber plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, building materials, damping paste, damping plate, electronics, etc.
1, Product performance:
This product has the advantages of high conversion rate, stable crystal form, low impurity content, significant true ratio, and reduced ignition. Its product has low longitudinal and transverse shrinkage, excellent electrical insulation performance, wear resistance, corrosion resistance, and high temperature resistance.
2, Product Usage:
The product is widely used in various abrasive tools, wear-resistant fillers, and for preparing various ceramic grade and refractory grade micro powders. It is used as a raw material for high aluminum, high-purity structural ceramics, electronic components, high-frequency insulation ceramics, and high aluminum ceramic balls.
PCE superplasticizer is the newest generation superplasticizer for concrete projects in domestic and abroad. Comparing with PNS and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage.
Sodium lignosulfonate
It is produced by reed as raw material and produced by low pollution technology,sodium lignosulfonate is with good solubility, high surface activity and dispersing ability.It is a sulfonate derivative contents benzoic acid and carboxyl.It's adhesion, dispersion and chelation are widely used in various industries to improve its physical and chemical properties, save costs and improve efficiency.
Mainly export for Concrete:
Polycarboxylate superplasticizer is a new type of water reducing agent. The water reduction rate is generally around 20%, but it has high requirements for cement and sand of concrete.If the mud content in the sand is slightly larger, the polycarboxylate superplasticizer has a water reduction rate of 0.However, the technical team found that when using polycarboxylate superplasticizer's dosage is 6% of weight with sodium lignosulfonate's dosage 4%-6%,the water reduction rate will reach the most ideal water reducing ratio and the cost of concrete admixture is also the most economical.Because of the characteristics of calcium and magnesium ions in Sodium lignosulfonate, it is easy to occur precipitation and discoloration when mixed with polycarboxylate superplasticizer.
It is produced by reed as raw material and produced by low pollution technology,sodium lignosulfonate is with good solubility, high surface activity and dispersing ability.It is a sulfonate derivative contents benzoic acid and carboxyl.It's adhesion, dispersion and chelation are widely used in various industries to improve its physical and chemical properties, save costs and improve efficiency.
Rock Wool Board is made of select fine basalt as the major materials which is pulled into 4-7µ non-continuous fibers after melted by adopting advanced international four-roller centrifugal cotton-making procedures and adding a certain of adhesives, dust laying oil and water repellent into rock wool fibers. It can be made into products series with different density according to various uses through the technology of sedimentation, solidify, cutting and etc.
Product Description :
Rock Wool Board is made of select fine basalt as the major materials which is pulled into 4-7 non-continuous fibers after melted by adopting advanced international four-roller centrifugal cotton-making procedures and adding a certain of adhesives, dust laying oil and water repellent into rock wool fibers. It can be made into products series with different density according to various uses through the technology of sedimentation, solidify, cutting and etc.
Main specification range of Mineral Wool:
Dimension: 1200/1000/900mm*600mm,
Thickness: 30-150mm
Density: 40-180kg/m3
Other size is customized as per customer's requirements.
