Description and uses
This product is mainly used in raising cats, dogs and other pets in families. It has advantages of eliminating of stink, clean and healthy economical as well as less rubbish. It has been used extensively at abroad.
Packing
In bags of 20kgs net each or 500kgs net each. Sachet of 3.6L,3.8L,5L or as per your demand.
Silica gel.
Product description:
First, Silica Sol
Specification:
Silica Sol is a kind of colloidal solution, and it is odorless and non-toxic. The molecular formula is mSiO2£®nH2O. Since the colloidal particle is precision(10-20nm),with large specific surface areas, and the particle is colorless and transparent ,so it will not influence the viscosity of the mulch. Since where the water can penetrate, it can make it. So the dispersion and permeability are great when mixed with other materials. While the moisture is low, the colloidal particle attached to the surface of the products, and it is a kind of good adhesive agent since the particle can connect with silicon and oxide.
Use:
It can be used as all kinds of refractory materials binders and it is high temperature resistance with strong agglutinating power, (1500-1600oC. When used in coating industry,it can make the coating much stronger as well as sewage resistance and dust proof , aging resistance , fire resistance and so on. When used in precision casting of thin shelf, it can make the shelf much harder with high casting finishing. And quality of the shape is better than that of water glass,which can replace the ethyl silicate and reduce the cost and improve the operating conditions. Silicon dioxide pyroxene has large specific surface areas and it can be used for the making of catalyst and catalyst carriers, paper making, or used as cellophane anti-adhesive agent, the treatment agent for papers used for photos or, cement bag antiskid agent and so on. The products can still be used as the textile industry agent and used together with oily agent to treat wool , rabbit hair,which can improve the spinnability of ?wool , rabbit hair,and reduce decapitation and prevent of fly waste, improve the proportion of products and increase the profit. The products can be used as the silicon sheet steel treatment agent, kinescope dispersant and floor polish anti-slipping agent and so on.
Details:
Items
Alkali Sodium
Acid without stability agent
Typical numerical
JN--20
JN--25
JN--30
JN--40
SW--20
SW--25
SW--30
JN--25
SW--25
silica (SiO2)
proportion ,%
20.0-21.0
25.0-26.0
30.0-31.0
40.0-41.0
20.0-21.0
25.0-26.0
30.0-31.0
30.3
25.6
sodium oxide (Na2O)proportion ,%
0.30
0.30
0.30
0.40
0.04
0.05
0.06
0.25
0.04
PH value
8.5-10.0
8.5-10.0
8.5-10.0
9.0-10.5
2.4-4.0
2.4-4.0
2.4-4.0
9.6
2.8
Viscosity (25oC),mp a.s
5.0
6.0
7.0
25.0
5.0
6.0
7.0
5.4
3.0
Density (25oC),g/cm3
1.12-1.14
1.15-1.17
1.19-1.21
1.28-1.30
1.12-1.14
1.15-1.17
1.19-1.21
1.20
1.16
Average particle,nm
10-20
10-20
10-20
10-20
10-20
10-20
10-20
11
10
[Validity]Alkali One year ,Acid half year .
[Package] Packed with 25kg plastic barrels or 250kg plastic barrels.
[Storage and transportation] When storied or transported, please keep the temperature between 0-40oC,and avoid of sunlight and freezing.
Second, Silica Sol
Specification:
Silica Sol is the colloidal formed by silica namometer particle in water,and it is milkiness with blue-opalescent ,while the silica colloidal particle has high proportion of specific surface areas. The products can be widely used in precision casting, paper making, textile, and coating as the no organic adhesive agent or catalyst, anti-skidding agent and so on.
The traditional alkali silica and acid silica has been applied precision casting, paper making and, coating fields for years. Recently as the development of world¡¯s science and technology, there are more requirements for silicon dioxide pyroxene. In order to meet the needs of the clients, Qingdao Ocean Chemical Co., Ltd. has developed a series of new silicon dioxide pyroxenes.
Use:
JX Silicon dioxide pyroxene is a kind of silicon dioxide pyroxene with small particle. Besides the usual specification of alkali silicon dioxide pyroxene, the particle is rather small and the specific surface area is large. So compared to normal particle alkali silicon dioxide pyroxene in precision casting, the finishing is great and the size are precision and with special use in battery field.
JA Silicon dioxide pyroxene, is a kind of silicon dioxide pyroxene used as stabilizer agent which is made of ammonia. It is a kind of disadvantage for normal stabilizer agent sodium ion in the silicon dioxide pyroxene in high temperature, or with catalyst or used directly in catalyst,while the JA Silicon dioxide pyroxene can perform much better for the sodium ion has been removed from the normal silicon dioxide pyroxene.
ZA Silicon dioxide pyroxene is a kind of new specifications silicon dioxide pyroxene and the PH is in the middle. Compared to the standard alkali silicon dioxide pyroxene or acid silicon dioxide pyroxene, the ZA silicon dioxide pyroxene does not need the alkali or acid situation to keep its stability and the PH value needs no regulation. So it is practical in ZA silicon dioxide pyroxene,,especially in high temperature coatings of ceramic and catalyst,the specification is prior.
JK silicon dioxide pyroxene is a kind of fast drying silicon dioxide pyroxene, and when used in precision casting compared to the normal silicon dioxide pyroxene, the products need less drying time and the time can be 1/2-1/3 of the normal silicon dioxide pyroxene as well as the high temperature resistance is improved.
Details:
Items
Specifications
JX-15
JA-25
ZA-25
JK-25
Stability particle
Sodium
Ammonia
Reduce Yang ion
Sodium
Average particle,nm
4-8
10-20
10-200
10-20
SiO2,%
15.0-16.0
25.0-26.0
25.0-26.0
25.0-26.0
PH
8.5-10.5
8.5-10.5
5.0-8.0
8.5-10.5
Viscosity (25oC),mp a.s
10.0
6.0
10.0
10.0
Density (25oC),g/cm3
1.10-1.11
1.15-1.17
1.15-1.17
1.15-1.17
NaO,%
0.40
0.045
0.07
0.30
Validity
One year
One year
One year
One year
[Package] packed in 25kg plastic barrels or 250kg plastic barrels.
[Storage and transportation]When storied or transported the silicon dioxide pyrogene,please try to avoid of sunlight and freezing. The normal temperature should be between 0-40oC,what is more the silicon dioxide pyrogene should be kept from air before used.
[Notes]For any special needs,please contact us.
1. Description and uses
Silica gel desiccant for small packing can be divided into two: A and B. A can be divided into transparent or semi-transparent sphericity and lumpy, B can be divided into white vitriform granules and lumpy. The main component is SiO2 (more than 98.5%), weight per package is from 1g to 5,000g, which can be easily put into the packages of all kinds of stuffs to play its function of moistureproof, antirust, germproof and to wipe off peculiar smell. It is widely used on the moistureproof of apparatus, meter, electronic material, wiring, leather, shoes, caps, clothes, medicine, foodstuff, container, house closet and office cabinet.
2. Technic Index of Silica Gel Desiccant for Small Packing
Item
Specification
A Style
B Style
Absorption
capacity %
RH=20%
8
3
RH=50%
20
10
RH=90%
30
50
Bulk Density g / L
720
500-600
Granularity mm
2-3, 2-5, 4-8
2-3, 2-5, 4-8
Loss on Heating%
5
5
Packing Spec
1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 250, 500, 1000
1, 2, 3, 5, 10, 20, 30, 50, 100, 200, 250, 500, 1000, 2000, 5000
Packing Material
Teapaper, Nonwoven Fabric, OPP, Tyvek
Teapaper, Nonwoven Fabric, OPP, Tyvek.
