Shandong Ningjin Xinxing Chemical Co.,ltd produce all kinds of crane foot support pads,crane stabilizer jacking blocks, crane cribbing plates,crane outrigger pads.
Many crane incidents and accidents happen because of an inadequate supporting surface below the outriggers. The supporting surface is one of the single most important factors of crane operation. The capacity of your crane is only as good as the supporting surface beneath the outriggers. This is especially important to keep in mind when working over the corner. Since the entire weight of the crane and the load can be transferred to it when the crane is making a lift. Cribbing under the outrigger pads helps support the crane and load weight, adding to the setup safety. Cribbing helps absorb noise, vibration, and provides extra grip for the outriggers. Cribbing must be made of a substantial material, be larger than the outrigger pad, and always level to decrease risk of slipping. Always make sure that the mats or cribbing is sufficient to support the entire weight of the crane and the load.
The combination of quality crane mats, outrigger pads, blocking and cribbing will help you operate your mobile crane more safely, reliably, and give optimally support the load.
Our engineered plastic cribbing plates and outrigger pads offer lightweight, strong, and solid support for your crane. Unlike other materials, XINXING Crane outrigger plates can be easily handled and positioned by one person. Our plates dont warp like wood or corrode like steel. They have no pilferage value, and with XINXING'S lifetime replacement guarantee, were confident they wont break.
Supplier for Construction HDPE Plastic Mobile road mats /track mats/road plates
Supplier for Construction HDPE Plastic Mobile road mats /track mats/road plates
Products Descriptions:
anti-uv hdpe ground cover mats,1220*2440mm HDPE track mat mat extruded hdpe ground protection mat 910*2440mm hdpe ground mat with texture ,road mat,track mat,Plastic Ground Protection Track Mats 900 x 2400mm,Plastic Ground Protection Track Mats
1100*2900mm HDPE track mat mat extruded hdpe ground protection mat 910*2440mm hdpe ground mat with texture.road mat,track mat,temporary road mats
HDPE track mat
virgin polyethylene uhmw outrigger pads uhmw mats pe sheet in plastic
temporary road mats,soundproof mat,GARDEN PP WOVEN WEED MAT\/FABRIC
fabric for pp sack,recycled pp fabric for bags
ground solutions featured products\/temporary road mats,mobile road rig mats\/mobile ground mats
heavy duty construction road mat,construction track mat,construction rig mats
nti-sip HDPE Plastic Road plates|HDPE �路�|HDPE plates|
XINXING ground mats is durable , light weight , and extremely strong . The mats are engineered to provide ground protection and access over soft surface and will provide a firm support base and traction for numerous activities . XINXING ground mats are great to save heavy vehicles from getting stuck in mud,even wet muddy and marsh condition .
Creates an instant roadway over virtually any type of terrain (mud,san,marshy ,uneven or soft terrain)
Protects valuable turf during landscaping projects
Superior alternative to plywood and fiberglass -will not warp , rot , crack or delaminate .
Save times&labor getting vehicles and equipments traversed over difficult terrain .
Avoid potential injuries to workers incurred while dislodging vehicles & equipment from excessive wear and damage due to operating on unstable ground conditions.
Easily handled and laid by two men-no need for expensive crane wagons
For extruted ground mats ,the size are as follows"
2000X1000X12.7MM
3000X1500X12.7MM
2440X1220X12.7MM
2440X610X12.7MM
4000X2000X12.7MM
2900X1100X12.7MM
Thickness can be 12.7mm,15mm,18mm,19mm,20mm,25mm
Other customer size is also available
The Min loading weight is 80 tons (static )
Material :HDPE Composite material
For the surface can be right side with type C
surface and back side with type D surface
Also both size with same surface is ok .
Extruded HDPE ground mats
Our ground protection mats are perfect for allowing access and gaining traction to construction sites for rubber tracked and tyred vehicles from cars, vans, JCB, cranes, HGVs up to 80 tons (static load).
X ground mats are ideal for ground protection and pedestrian foot paths over soft or sensitive ground, sand, mud, turf, marshy areas at any event.
Our track way mats can be used to create administrative compounds, bone yards, temporary flooring and other industrial applications.
A superior alternative to plywood, X ground mats will not warp, rot, crack, delaminate or absorb harmful chemicals. Made of a special HDPE.
nti-sip HDPE Plastic Road plates|HDPE HDPE plates|
XINXING ground mats is durable , light weight , and extremely strong . The mats are engineered to provide ground protection and access over soft surface and will provide a firm support base and traction for numerous activities . XINXING ground mats are great to save heavy vehicles from getting stuck in mud,even wet muddy and marsh condition .
Creates an instant roadway over virtually any type of terrain (mud,san,marshy ,uneven or soft terrain)
Protects valuable turf during landscaping projects
Superior alternative to plywood and fiberglass -will not warp , rot , crack or delaminate .
Save times&labor getting vehicles and equipments traversed over difficult terrain .
Avoid potential injuries to workers incurred while dislodging vehicles & equipment from excessive wear and damage due to operating on unstable ground conditions.
Easily handled and laid by two men-no need for expensive crane wagons
For extruted ground mats ,the size are as follows"
2000X1000X12.7MM
3000X1500X12.7MM
2440X1220X12.7MM
2440X610X12.7MM
4000X2000X12.7MM
2900X1100X12.7MM
Thickness can be 12.7mm,15mm,18mm,19mm,20mm,25mm
Other customer size is also available
The Min loading weight is 80 tons (static )
Material :HDPE Composite material
For the surface can be right side with type C
surface and back side with type D surface
Also both size with same surface is ok .
Extruded HDPE ground mats
Our ground protection mats are perfect for allowing access and gaining traction to construction sites for rubber tracked and tyred vehicles from cars, vans, JCB, cranes, HGVs up to 80 tons (static load).
X ground mats are ideal for ground protection and pedestrian foot paths over soft or sensitive ground, sand, mud, turf, marshy areas at any event.
Our track way mats can be used to create administrative compounds, bone yards, temporary flooring and other industrial applications.
A superior alternative to plywood, X ground mats will not warp, rot, crack, delaminate or absorb harmful chemicals. Made of a special HDPE.
Shandong Ningjin Xinxing Chemical Co.,ltd produce the LDPE track mats ground mats&walk boards with 100% low density polyethylene so the mats is very flexible and unbreakable.The LDPE track mats can be both side with patterns or just one side flat and other side with patterns as per customer demands.Can give customer a big choice.
Ground Boarding To Prevent Mud - The XINXING LDPE track mats ground mat&walk boards can be placed on the work site anywhere workers are frequently walking to prevent the ground from churning up and becoming muddy.
Spoil Storage - Keeping site spoil stored in a way that it cannot make contact with the ground makes it easier to remove by grab trucks. The mats is ideal for this application.
Access Trackway - For vehicular access on firm ground these mats are ideal. If you need to get a cement delivery on-site or park your work van, then this may be just what you need.
Materials Storage - Materials such as blocks, bricks, cement and other materials can be kept on a clean, stable pad ready for when they are needed.
Cement Mixing - The flat, smooth side can even be used to mix cement on in the absence of a cement mixing tray.
Event Flooring - If you need to create a walkway through a gateway or to a tent during a party these mats are well suited.
UHMW-PE Fender Face Pad is also called UHMW-PE Frontal Pad and UHMW-PE Pad. Our UHMW-PE Fender Face Pad including the Corner Pad Edge Pad and Flat Pad .
This UHMW-PE Fender Face Pad are used mostly on the SCP Fender and Cone fender which are called the latest in state-of-the-art molded fender products. The UHMW-PE possesses a low coefficient of friction which provides a smooth sliding surface for the vessel to travel along the fender face. The following character also make the UHMW-PE Fender become the strongest and most popular fender in the world.
Various size and color.
Pallet.
It is widely used in the interior lining of coal house of thermo power plants ,coal mines and coking plants etc. ,the raw material storehouse of cement factories ,steel mills and aluminum factories ,the granary of food industry ,feedstuff industry and pharmaceutical factories as well the hoppers at wharfs.
Various size and color.
UHMW-PE Sheet can be provided by various color ,size and molecular weight.You can find any kind of UHMW-PE Sheet that you want here.
The UHMW-PE Sheet made by us have the following advantages :
1.Very flat on the surface
2.The thickness tolerance is +2 -0
3.The color is pure and any color can be made by us.
4.We can give you an accurate size of UHMW-PE Sheet with advanced machine
5.Different shaped UHMW-PE Sheets also can be made by us like bending sheet.
Pallet.
UHMW-PE Sheet can be provided by various color ,size and molecular weight.You can find any kind of UHMW-PE Sheet that you want here.
Various size and color.
