essure Regulators
• Inlet pressure 200 bar maximum
• Delivery pressure adjustable 1 to 10 bar
• Fluid media, non corrosive gases
o o • Temperature range -40 c to +70 c
• Body ports 1/4" / 1/2" npt female
• Pressure gauges 50 mm diameter
• Wetted area parts ultrasonically cleaned corrosion resistance
Test pressure is 50% above manifold pressure. Normal cylinder /
manifold pressure is:
2 Argon : 151 kg/cm
2 Helium : 151 kg/cm
2 Hydrogen : 151 kg/cm
2 Nitrogen : 151 kg/cm
2 Oxygen : 151 kg/cm
2 Carbon-dioxide : 60 kg/cm
2 Dissolved acetylene : 20 kg/cm
2 Ammonia : 25 kg/cm
2 LP Gas : 17 kg/cm
Model PV-R2101
Flashback arrester with non return valves
MATERIAL
•Varieties of non-corrosive materials to select from
•All materials confirm to IS specifications
•Materials compatible to fluids
•All materials environment friendly
MANUFACTURING
•Manufactured to exact drawing specification
•Threads confirm to IS specifications
•Total interchangeability within same type and size
CONNECTIONS
Standard in 3/8” BSP LH and RM
•Wide range of external, internal as well combination of threads, for
industrial & domestic usage
DESIGN ADVANTAGES
•Compatible materials
•No soldiered, brazed or welded joints
•Leak tight integrity
•No gas contamination
•Compact size
•Useful for all fluids
•Pressure suitability
•Maintenance free
TEST
•100% factory tested
•Factory test certificates available on demand
•Available in 2 models - 20 bar & 200 bar test pressure.
Flame Arrester
Mesh type MS Seamless body.
Available in ½”, ¾”, 1½” BSP
Line Regulators for Industrial / Commercial Piping
Pre-Reg 2 - 1"
Adjustable Regulator - High Pressure
LP Online Regulator - Low Pressure with nozzle or 3/8 BSPM
LP Online Regulator (Adjustable) - Low Pressure with 3/8
BSPM
With NCV adopter
As per customer
anifolds
Suitable for any number of cylinders to be used at a time. Centre distance between the consecutive lugs is 350mm (14”) or 425mm (17”), 2 x 2,
3 x 3, 4 x 4, 5 x 5, 6 x 6, 7 x 7, 8 x 8 etc. Also manufactured as per customers requirement. We manufacture manifolds for all industrial gases in
stainless steel pipe and forged blocks. As depicted below :
For LPG in LOT or VOT Systems
Part No. 1171 to 1177
Suitable for any number of S.C.V. type cylinders to be used at a time. Centre distance between the consecutive lugs is 350mm (14”) or 425mm
(17”), 2 x 2, 3 x 3, 4 x 4, 5 x 5, 6 x 6, 7 x 7, 8 x 8 etc. Also manufactured as per customers requirement. As depicted below :
Multi Lock Bearing Adapter
cylinders fitted with self-closing valves to a high pressure system
through a standard M.E.C.V. thread with unreduced pressure and a
high flow rate. The adopters are fitted with a non return valve to ensure
that there is no return flow of LPG whilst cylinders are being
disconnected. The salient features of these adopters is the multipoint
locking mechanism which combined with a face seal ensures
that the adopter will not leak even if it is loaded off axis. The quick
disconnecting arrangement coupled with a safety interlock ensures
that the device can only be disconnected after turning off the gas flow.
Both adopters featured above are available in 22 mm and 25.6 mm
seats, and 3/8” or MECV outlet size.
Makes available : Kosan | Vel | Gasman
cylinders fitted with self-closing valves to a high pressure system
through a standard M.E.C.V. thread with unreduced pressure and a
high flow rate. The adopters are fitted with a non return valve to ensure
that there is no return flow of LPG whilst cylinders are being
disconnected. The salient features of these adopters is the multipoint
locking mechanism which combined with a face seal ensures
that the adopter will not leak even if it is loaded off axis. The quick
disconnecting arrangement coupled with a safety interlock ensures
that the device can only be disconnected after turning off the gas flow.
Both adopters featured above are available in 22 mm and 25.6 mm
seats, and 3/8” or MECV outlet size.
Makes available : Kosan | Vel | Gasman
Manifold Fittings for LPG
Manifold Lug MECV MS Adopter
• Union Pin Set With Nut
• Non return valve for VOT manifold
• M.S. Adopter 3/8” B.S.P.P.M. X Bull nose for FECV Nut. Available for
½" and 1" pipelines
• Bung: Manifold bung for F valve fitting size ¾” B.S.P.T.M or
½”B.S.P.T.M.
Standard Lot Size
Cyclone Burner
System B
Art No. 333501
•Cyclone flame burners are the most
efficient burners for brazing and soft
soldering •The rotating flame gives
an even and all-round heat transfer to
the pipe •Working pressure 2 bar
Hot-air
System B
Art No. 333401
•Hot-air burners with powerful wind
proof hot-air streams for heat
shrinking •3349 ideal for shrinking in
confined spaces and fibre optic
closures •Working pressure 2 bar
Soft Flame Burner
System B
Art No. 334191
•Soft flame design ideal for cable
work and other heat shrinking
applications •To heat the sleeves
efficiently but still soft enough not to
overheat the shrink material
•Working pressure 2 bar
Standard Burner
System B
Art No. 334401
•Standard burners with brush-type
flames for all kinds of soft soldering /
small heating applications •Silver
soldering about 615°C •Working
pressure 2 bar
Pin-point Burners
System R
Art No. 884204, 393802, 393902
•Pin-point burners with the finest flames for
precision work such as gold and silver forging
•Recommended working pressure 2 bar
Pin-point Burners
System R
Art No. 294102
•Standard burners with brush-type flames for all
kinds of soft soldering/small heating applications
•Recommended working pressure 2 bar
Neck Tubes
System R
Art No. 350101
Only for pin-point burner 884204
Neck tube Length, 78mm
Art No. 351102
Neck tubes made for high quality brass
Neck tube Length, 70mm
Propane Hoses
• Diameter 5 mm and 8 mm • EN 559 / ISO 3821
• Fixed connection type • BSP 3/8" LH connection
Regulators
Art No. 309129 Art No. 306119
Standard Lot Size
Residential Diaphragm Gas Meter
ITRON (MID approved)
Steel Version
Basic Features
3 Compact size: 1.2 dm cyclic volume
Range: G1.6, G2.5, G4
EN 1359 & O.I.M.L compliance
Design
Long -term accuracy & safety
Ready for remote reading & data management
Quality
World-class, ISO9001 certified, European Engineering and
Manufacturing
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
Prepaid Gas Meter
Sensus Meters
satndars
Copper Burner Pigtails
Available in length size 12”-18”-24”-36”-48”-60”.
For 3/8 BSPM connections. Copper tube with brass bullnoze and nut.
Copper Cylinder
Copper Cylinder Pigtails
Copper tube with brass bullnoze and nut.
Industrial Gas Hoses
Heat resistant flange
end hoses
LOT Hose
Liquid off-take hoses
S.S. Teflon Industrial Gas Hose
Flexible Burner Pigtails
Low pressure hoses for imported automatic burners.
Standard Lot Size
Roses.
As per customer requirement.
Grapes.
As per customer demand.
