Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
PU Paints
Emulsion Paints
Primer
Water Based Coatings - Primers, Gloss & High Scuff - High Gloss/High Slip - Duct Gloss & Matt - Specialty Coatings - Soft Feel / Satin / Neutral / Super Matt
Winoil solvent-based insulating primer for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Size 1 kg 5kg 10kg 20kg Winoil insulating primer based on solvents for sealing off penetrating surfaces such as: nicotine, soot, water stains, felt-tip pens, red wine, coffee, etc. Can be used as a primer outdoors. Wood can be insulated against the penetration of the wood's ingredients. Winoil insulating primer can be painted over with any conventional solvent-based or emulsion paint. Can be painted over after approx. 20 minutes. Color: White Weight n/a Size 1kg, 5kg, 10kg, 20kg
Fast-drying, water-clear and easily sandable wood primer for all hard and soft woods indoors. Size 750ml 5 litres 25 litres Fast-drying, water-clear and easy-to-sand wood primer for all hard and soft woods indoors. The pores are sealed so that the subsequent varnish has better filling properties. Protects the wood from moisture and prevents the varnish from sinking. For all wood and wood materials. Weight n/a Size 750ml, 5l, 25l
Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats. Size 5 litres 10 litres 25 litres Low-odor and colorless primer. Highly alkali-resistant, for solidifying mineral substrates and for promoting adhesion for subsequent coats of paint. Works as a pore-spanning and sealing agent for highly absorbent substrates. On concrete, sandstone, cement, sand-lime brick, Eternit, plaster, etc. (Strongly crumbly substrates cannot be solidified. Weight n/a Size 5L, 10L, 25L
