Semec Technology Company Ltd.

This product is equipped inside with reliable explosion-proof equipment and is highly safe. With its good self-healing ability and long lifespan, it is widely used for air conditioners, refrigerators, generators and illuminating lamps.

A&s semiconductor co., ltd can supply many kinds of ceramic capacitors Ceramic capacitor Disc ceramic capacitors Smd ceramic capacitor Tubular ceramic capacitor High voltage ceramic capacitor High capacitance ceramic capacitor High temperature ceramic capacitor Ceramic multilayer capacitor Monolithic ceramic capacitor Disk ceramic capacitor Surface mount ceramic capacitor X7r ceramic capacitor 10uf ceramic capacitor 1n ceramic capacitor 1uf ceramic capacitor 221 ceramic capacitor 22n axial ceramic capacitor 4.7uf ceramic capacitor 0.1uf ceramic capacitor 0.2 uf 50v ceramic capacitor 100nf ceramic capacito 470pf ceramic capacitor 103 ceramic capacitor -

The function of a capacitor in a fan is to store electrostatic energy in an electric field and where possible, to supply this energy to the circuit. The role of a capacitor in a fan is to prevent a dangerous failure of the circuit, they allow the AC to move but block the flow of DC. A condenser, also known as a capacitor, is used in a fan to help regulate the electrical current flowing through the mot. The function of the condenser in a refrigeration system is to transfer heat from the refrigerant to another medium, such as air and/or water. By rejecting heat, the gaseous refrigerant condenses to liquid inside the condenser. A condenser is an essential component within any HVAC system. Its purpose is to take in high-pressure refrigerant gas, emitted by the compressor, and convert it into liquid state. The refrigerant is cooled and then condenses at a virtually constant temperature and pressure. A capacitor can help a fan motor to run at a higher speed by helping to regulate the current flowing through the motor. A capacitor is connected to the start winding in a Fan. In low power induction motor like fan it is left connected permanently, so as the capacitor ages speed of Fan reduces.

1, Operating Temp.Range, -20íµí½-+85íµ, í¬í¬,, 2, Capacitance, Within the specified Tolerance, Measured at 25íµ with 1í+ 0.1kHz and 1V (rms), 3, Temperature Characteristics, D, N4700, Compared with the, value measured at 25íµ,, the capacitance change from -25íµ to 85íµ should not exceed the limit specified., 4, Dissipation Factor, í_0.3úÑ, The same as No.2, 5, withstand voltage, No failure, Applied 1.5 times of rated voltage for 60 second., 6, Insulation Resistance(I.R.), >104MW, Measured with DC 1kV within 60í+5sec., 7, Life, Appearance, No marked defect,, Capacitance change, whthiní+20úÑ,, D.R., í_5úÑ,, I.R., 1000 Mª+min., Apply a DC voltage of 125% of the rated voltage for 100+24/-0 hrs. in silicon oil at 85í+2íµ. Post treatment: Capacitor should be stored for 24 hrs. at room condition.(Charge/Discharge currentí_50mA), 8, Humidity, (under Steady State), Appearance, No marked defect,, capacitance change, withiní+20úÑ,, D.R., í_5úÑ,, I.R., 1000 Mª+min. Set the capacitor for 100-0+24 hrs at 40í+2íµ in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 24 hrs.at room condition.

Ceramic Capacitors TS15 Ceramic Disc Capacitor -50V, 500V ff TS16 High Voltage Ceramic Capacitor ---1KV, 2KV, 3KV, max 35KV.ff TS17 Multilayer (Mono) Ceramic Capacitor --Radial & Axial ff TS18 Multilayer Ceramic Chip Capacitor - SMD, 50V, 0603,0805,1206 etc. ff TS18H High Voltage Multilayer Ceramic Chip Capacitor - SMD, 100V, 250V, 500V,1KV, max 4KV, 0603, 0805, 1206, 1210, 1812, 1808, 2220 etc. TS22 Safety Standard Reconized Capacitor - Y Capacitor, 250VAC, 400VAC

Part name: jfv x2 metallized polypropylene film capacitors ( interference suppression capacitors / class x2) -- jfv x2 with enec, vde, ul approval for 275vac, 305vac, 310vac. -- bulk (loose) and ammo tape package both available; cut leg and long leads on request. -- jfv x2 have unbeatable prices -- fast delivery, some items have stock available. -- very stable quality, fast sales response, good service -- cross reference available on website Bulk or ammon

High voltage multi-layered capacitor high power ceramic stacks PRODUCT DESCRIPTION Voltage doubler module (high voltage stack capacitor) is an integrated voltage doubler integrated rectifier module, which is part of the entire circuit integrated in a device, because of its integrated structure, so it is not subject to vibration, humidity, gas corrosion, not afraid of dust, oil Baptist, can work in harsh environments. Ideal for use in photomultipliers, ionization chambers and similar stable high voltage DC rectifiers that require high voltage, low leakage detection devices. Low dissipation, small tolerance Good charge and discharge performance Small size, high withstand voltage A variety of series, a variety of assembly way Stable electrostatic capacity ELECTRICAL PARAMETER Name: multiplier ceramic high voltage capacitor Frequency:1KHz The rated voltage:10 ~ 50 KV Insulation resistance:(IR) 10000M © The loss tangent:Tg 0.3% Capacitance:10 ~103 PF Tolerance:K ( ± 10%) Withstand voltage test:DC1.5 times no breakdown or flashover SPECIFICATION TABLE A-Model parameter table Series A: enhanced, by silver fittings connection between capacitance per level, structure optimization, heat evenly, increase insulation, good reliability Material code Capacity Rated voltage D (mm) L (mm) PCS/STACK CDM20KV151KB12 150PF 20KV 6.1 71 12 CDM10KV251KB12 250PF 10KV 5.2 66 12 CDM20KV331KB11 330PF 20KV 7.8 66 12 CDM20KV471KB12 470PF 20KV 8.3 75 12 CDM20KV501KB12 500PF 20KV 8.3 74 12 CDM30KV221KB10 220PF 30KV 8.5 91 10 Can provide module customization, multi-level customization is ok B-Model parameter table B series: economy, direct welding between capacitance per level, and unilateral or bilateral derivation leads to two kinds of structure, cheap, economical and practical, overall length can be adjusted according to customer's requirements. Material code Capacity Rated voltage D (mm) L (mm) PCS/STACK CDM20KV101KA10 100PF 20KV 5.2 62 10 CDM20KV151KA12 150PF 20KV 6.2 60 12 CDM20KV251KA12 250PF 20KV 5.2 59 12 CDM20KV301KA12 300PF 20KV 8.0 60 12 CDM20KV351KA12 350PF 20KV 6.2 58 12 CDM20KV471KA12 470PF 20KV 8.7 63 12 Can provide module customization, multi-level customization is welcome APPLICATION FIELD Suitable for electrostatic spraying doubler module circuit application and typical handheld high-voltage electrostatic spray gun, the built-in high voltage module, low and high pressure anion generator in high voltage power supply components. Static electricity generating circuit, spraying machines, electrostatic flocking equipment, doubler circuit, high frequency doubler rectifier circuit, a major part of the multistage doubler rectifier circuit, low power dc high voltage power supply, etc

0.1k/275v P:10mm 18x12x6 . 500pcs/bag or 10k/carton.