Features: 1. Protection different zone: 32 zones with 32 different zones indicated on panel. 2. Each zone can be put more sensors. 3. Partial disarmed optional by remote control. One keypad easy to Partial disarmed some sensors that programmed in the second zone. 4. Auto-dial up 6 phone numbers and recycle to repeat unless confirmed. 5. Store voice recorded message (10 second), it can be recovered. When received alarm message, it speaks as you spoken. 6. Ni-mh rechargeable battery to back up power: >24 hours. Auto-switch if ac power is off. 7.Telephone manages the alarm system, convenience. 8.Phone trunks protected to avoid any designing destroy. 9.Led on the panel to display protection zone. 10. Pir detector is preset for the second zone which can be disarmed solely 11.Audible /mute siren optional. 12.Quick program by the panel keyboard. 13.When received alarm call, you can press the keypad on the phone to Disarm/arm/monitoring/start on/off siren 14.Panel keyboard password protected and incoming calling password protected. 15.Alarm time can be customized. 16.Siren sounds time/ alarm triggered time/armed alarm times to be programmed to be delayed. 17.All panels can connect with the alarm receipt managing centre Specification: 1. Wireless frequency: two option: 433mhz or 315mhz 2. An adaptor: option: input electricity from 110 acv ~240 ac, customized. Adaptor Choosing: two round pins, two flat pins, three pins customized 3. Wireless receiving distance in open place: >200m, indoor: 30~50m, (depend on the surrounding environment and wireless interference) Color box in cartons Moq:100sets. Payment: t/t or western union
Features: 1.Wireless burglar alarm, home security alarm, alarm system . 8 wireless different zones and 8 wires zones 2. Long-distance monitoring and alarm protected zone recheck 3. 13 led to indicate the alarm zone. 4. To program 6 phone number 5. Multi-armed mode: delay armed, armed without auto-dial up 6. Prompt sound for each alarm. 6. With keyboard to program each function 7. In-coming calling times to be programmed 8. Telephone trunk protected 9. Battery back-up , built-in panel. 10. While alarm is happened, it can track the alarm zone by real time through long-distance. Specification: 1. Wireless frequency: two option: 433mhz or 315mhz 2. An adaptor: option: input electricity from 110 acv ~240 ac, customized. Adaptor choosing: two round pins, two flat pins, three pins customized 3. Wireless receiving distance in open place: >250m, indoor: 30~50m, (depend on the surrounding environment and wireless interference) 4. Standby current: < 15ma 5. Alarm volume: internal :95db, external siren: 110~120 db 6. One control panel with one internal siren: working voltage:+9 dcv, 200ma. 7. Two wireless remote controllers: four button: disarm/arm/panic/pir detector 8. One wireless magnetic door sensor:12 dcv 9. One wireless infrared detector: 10m*120 ¿¬phorizontal+60¿¬pvertical 10. Optional sensor: wireless smoke detector, gas leakage detector, vibration sensor, siren with strobe light, flashing siren, horn siren, remote control, all sensors as we selling. 11. Packing box: 31.5*25.8*7.5cm carton(10sets):53*35*41cm.Standard package: one control panel, one magnetic door sensor, one pir detector, two remote controllers, one telephone line, one wired siren, one adaptor, one instruction. Color box in cartons. Moq:100sets Payement: t/t or western union
The NFS-3030 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in small to medium-sized fire protection systems and provides effective fire detection and alarm notification. The NFS-3030 features a compact design and advanced microprocessor technology, making it easy to install and program. The control panel supports up to 384 points and includes built-in communication options, such as analog dialer and network interfaces, for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, providing versatility and customization for specific fire protection needs. The NFS-3030 is a cost-effective and reliable fire alarm control panel from Notifier.
The NFS2-640 is a fire alarm control panel (FACP) manufactured by Notifier. It is designed for use in medium to large-scale fire protection systems and provides reliable fire detection and alarm notification. The NFS2-640 features a compact design and advanced microprocessor technology, allowing for easy installation and programming. The control panel supports up to 640 points and includes built-in networking capabilities for remote access and system integration. It is compatible with a range of Notifier fire detectors, modules, and accessories, offering flexibility and customization for specific fire protection needs. The NFS2-640 is a feature-rich and reliable fire alarm control panel from Notifier.
With camera & pir itself Can send mms to your mobile phone. Can send picture to your e-mail. Support gsm frequency 850/900/1800/1900 mhz, 315/433 mhz optional Can match wireless detectors/sensors with mainframe by learning code. Ir thermo image monitoring and detection for moving objects, the double detection technology can eliminate the false alarm caused by environmental reasons. With ir night vision camera, it provides full time 24 hours day and night monitoring function. 16 wired guarding zones(8 input, 8 output), 11 wireless guarding zones? Arm/disarm/partial arm by remote controller or sms.? Auto-dial 1 preset phone numbers of alarm center
Wireless GSM Alarm System Wireless Alarm System GSM Alarm System Alarm System GSM Alarm Wireless GSM Alarm System S100 with multi-functions. It integrated GSM Module inside, and almost all useful functions and features of the alarm systems in the worldwide markets. Also it with innovative and experienced functions and features to meet the required and potential demands. Wireless GSM Alarm System S100 is a new security protection solution. It is special for home, house and office and other applications. It based on Wireless GSM Communication network; it can alert you by SMS and calling. Wireless GSM Alarm System S100 supports two way voice communication and wiretap by intelligent technology. It can answer the incoming call as well as dial out to the others. It is very useful for user to create voice communication or listen in the houses. Wireless GSM Alarm System S100 supports Watchdog, once the sensor in this zone triggered in the preset time, will not alarm, if the sensor hasn¡¯t been triggered in the preset time, will alarm. It is useful for monitoring elders, children and the person on-duty. Wireless GSM Alarm System S100 equips with two output relay, one is link-output relay, special for switch on or off appliance while the system alarm, another is independent output relay, it can be switched on or off by SMS commands. Wireless GSM Alarm System S100 equips with LCD display entire operation menu, all operations and settings are visual and intuitive! Wireless GSM Alarm System S100 supports GSM Jammer interference! Wireless GSM Alarm System S100 with user friendly design idea, all operations and settings are visual and intuitive! What you need is a SIMCard which supports Call ID function. The advantages of Wireless GSM Alarm System S100: 1. Two-way Voice communication or wiretap are available; 2. LCD displays the entire setup menu; 3. Armed, Partial Armed(At House or Stay), Disarmed, SOS are available; 4. Armed delay, alarm delay, siren work or not, more other functions are Programmable by user; 5. Watchdog,24Hours Zone, SOS zone are available; 6. Using ICON to display armed, Partial Armed, Disarmed, Power status, Siren status and GSM Signal status; 7. Auto-detect and report, GSM Signal Jammer alarm, SMS Switch is available. Standard Package list of Wireless GSM Alarm System S100: Mainframe X1 Remote contol X2 Wireless PIR Motion Sensor X1 Wireless Door magnetic Sensor X1 Wired Siren X1 GSM Antenna X1 AC/DC AdaptorX1 User Manual.
Description: GSM network protection, short message sending function. DIY, Customize, easy-to-use and install! ATS-802 is the updated advanced GSM prepaid module made by Shenzhen Autosecu Technology CO.,LTD.It features eleven different wireless protection zones, two wired protection zones, partial disarmed, remote telephone control, remote electricity control, etc. compatible with CCTV surveillance and centre monitoring system. FEATURES: 1. Wireless type, easy to install, without phone line. 2. Remote control, convenient. 3. Password protected 4. SMS to enable arm/disarm, partial arm/disarm, siren 5. High siren volume so to scare away intruders 6. SMS and auto dial up three phone numbers, locale monitoring start on. 7. SMS to recheck the GSM panel status, alarm report, zone name, arm/disarm status. 8. Audible/mute siren programmed 9. Panic help 10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to battery back-up
GSM MMS alarm system 1.Automaticly take photos and send it to mms mobile phone or email when alarming(continuous 1-99 pcs available), hi-definition day and night camera (24granules infrared night version led, 2million pixel, with motion detect function.) 2. When alarm the horn sounds 110 db, gsm mms alarm host will send message( the content of which can display a specific alarm area) call or send mms to the receiving alarm mobile numbers. 3. Initiatively monitor scene------dial host number by mobile or telephone. 4. Initiatively look over scene----order host to send scene photos by mobile or telephone (photos available with 1-99 pcs by user define) 5. Remote control ----mobile or telephone remote control on-spot host, , arm/disarm, electric appliance switch, scene horn alarm. 6. Virous form of alarm-----calling voice alarm, mobile sms alarm , mms alarm. 7. Alarm host will send message tips when sudden power off , lack of power or restore power. 8. With emergency alarm button for emergencies. 9. Networked with alarm center . 10. Password control host (call or send message to host will need to enter password) and insert sim card for double insurance. 11. 16 wireless defence area, 2 wired defence area, can be connected to any detectors. 12. Can be connected to any dvr recorder, joint output. 13. Can set to send the scene photos taken by host to mail box, or automatically store in host sd card. 14. With back-up power supply, power outage are not afraid. 15. Can control connect two sets of home appliances. 16. New function of talk, microphone, can use as a mobile any time. Size:155mm*140mm*400mm Around 3kg.
The fall down detection alarm system designed to use in the industrial and commercial areas, to ensure safety for employees working in high-risk facility, working alone, security guard, elder or disabled. The Worker Emergency Alarm System is a combination of personal alarm and fall down detector. When wireless Man-Down Transmitter detects the horizontal position, it is trigger alarm signal. The Wireless Fall Down Alarm Detector will beep for 30 seconds to warn the wearer to avoid false alarms before sending the warning signal to control center and to other wearers in the group. The wearable alarm detector has tilt detection, no motions detection. The Lone Worker Alarm can also be activated manually by pressing an SOS button. The Fall Down Detection Alarm System includes wireless fall down detector, Base Receiver with LED Display and alarm signal repeater. The Wireless Alarm Signal Repeater can extend the alarm signal about 800 meters. (true-line-of-site range). The repeater helps to build lone worker security system for the indoor and outdoor application. One Base Receiver can work with 15 pcs personal alarm detector.