A suitable solution for. Airborne substances, viruses and other fine particles in the nanoscale range are filtered out of the air with a separation efficiency of 99.995 % and the activated charcoal filter also removes odours. The integrated CO2 sensor alerts you should additional ventilation be required.
Stella Air Freshener Available Stella AIO 72x42gr+13gr, Stella Ae 12x400ml, Stella Ae 12x200ml, Stella Matic Device contain 12pcs, Stella Matic Refiil contain 12pcs, Stella Matic Refill Parfumist contain 12pcs. Product is Manufactured by PT Megasari Makmur.
Clean air equipment, such as fume hoods, air purifiers, and HEPA filters, ensures a safe and contaminant-free environment in labs. These devices help remove harmful particles, gases, and fumes, protecting both the samples and the researchers.
Low Dew Point Combined Compressed Air Dryer Working pressure: 0.6~1.0Mpa Pressure drop: less than 0.05Mpa Inlet temperature: less than 45 celsius degree (Normal temp. type) Inlet temperature: less than 80 celsius degree (High temp. type) Dew point: -40~ -70 celsius degree Cooling watre temperature: less than 32 celsius degree (water cooling type) Purge air: 3~5% Control mode: Micro-program controller Installation mode: Indoor, non-basement
Air dryer(desiccant air dryer) hsd-10wxf Desiccant compressed air dryer (heatless purge and externally heated purge) 1). Heatless purge desiccant air dryer Inlet temperature: 0~45 celsius degree Inlet oil content: 0.01ppm Working pressure: 0.6~1.0mpa Dew point: -20~-70 celsius degree Purge air: 12% Desiccant: activated alumina & molecular sieve Purge mode: heatless purge Working method: continuing alternation between two towers Working periods: t=10~20min. Control mode: micron computer auto controlling Installation mode: indoor, non-basement 2). Externally heated purge air dryer Inlet temperature: 0~45 celsius degree Working pressure: 0.6~1.0mpa Dew point: -40~-70celsius degree Purge air: 4~6% Desiccant: activated alumina & molecular sieve Purge mode: externally heated purge Working method: continuing alternation between two towers Working periods: t=120~140min. Control mode: micron computer auto controlling Installation mode: indoor, non-basement
freezer air dryer refrigerated air dryer air dryer 10hp Pressure Dew Point(PDP): 2~10 Capacity :1.2~400m3/min(42~14000cfm) Working pressure :â?¤1.6MPA (16bar) Max. inlet temperature : 80â?? Refrigerant:R134A\R410A\R407C Max. Ambient temperature:40 Min. ambient temoperature:5 Cooling type :Air-cooling
Refrigerated air dryer
Reference performance: Max. ambient temperature: 40°C, 104°F Max. inlet temperature: 80°C, 176°F Working pressure range: 4-15 bar Max. pressure drop: 0.18 bar Pressure dew point: 3~5°C Refrigerants and max. working pressure are customizable High-efficiency Heat Exchanger: Counter-flow on both air to air/air to refrigerant side, up to 1.6 times cooling efficiency than shell and tube heat exchanger. Smaller dimension, 30% less power consumption, more stable pressure dew point, compared with shell and tube heat exchanger. 4 ~15 bar working pressure, customizable. Never get rusted: made of stainless steel or aluminum, and the rest part that contacting compressed air is made of 304S stainless steel, which never results in getting rusty problem as shell and tube type. Air-cooled refrigerant dryers: Offer patented condenser with louvered fin technology for improved performance in more demanding environments. Model A 30(+) ?? 150(+) : equipped with meters. Model A 200(+) ?? 2000(+) : equipped with microcontrollers. PLC and user-friendly interface are optional. Refrigeration compressor: Panasonic, Danfoss, Copeland, etc. Electronic drain: Anti-blocking function. Robust and compact design: Forklift opening for easy transportation. Removable panels for easy maintenance access. Fan switch: Automatically switched on or off depending on various loads. Hot gas bypass valve: Prevents freezing at a low load. Filters: DP offers integrated filters to satisfy a higher lever of filtration. Refrigerant Types: R22 R407C R134A R410A Refrigerants are customizable.
Desiccant Compressed Air Dryer two types ---heatless purge and externally heated purge 1). Heatless purge desiccant air dryer Inlet temperature: 0~45 Celsius degree Inlet oil content: less than 0.01ppm Working pressure: 0.6~1.0Mpa Dew point: -20~-70 Celsius degree Purge air: less than 12% Desiccant: Activated alumina & molecular sieve Purge mode: Heatless purge Working method: Continuing alternation between two towers Working periods: T=10~20min. Control mode: Micron computer auto controlling Installation mode: Indoor, non-basement 2). Externally heated purge air dryer Inlet temperature: 0~45 Celsius degree Working pressure: 0.6~1.0Mpa Dew point: -40~-70 Celsius degree Purge air: less than 4~6% Desiccant: Activated alumina & molecular sieve Purge mode: Externally heated purge Working method: Continuing alternation between two towers Working periods: T=120~140min. Control mode: Micron computer auto controlling Installation mode: Indoor, non-basement
