WDW Series Universal Electromechanical Universal Testing Machine It is computer-controlled precision Testing Machine, suitable for wide range of material for tension, compression, Bending and shearing test. It has high stability as well as high precision, equipped with PC system & printer for graph, test result display, printing & data processing. Complete with modulus for metal, spring, textile, rubber, plastic and other material testing & creep test. It is widely used in many fields such as industry factories, mineral enterprise and high schools. Applied Standard Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4. Tensile test at room temperature DIN EN 10002-1, ISO 6892, ASTM A370, ASTM E 8 Tensile test on reinforced steel: ISO 10606, EN 10080 Compression test DIN 50106, ASTM E9
Used for testing crushed rock, crushed slag, crushed and uncrushed gravel for resistance to abrasion. Specifications: The machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings Compete with abrasive charge consisting of a set of hardened stainless steel balls, approximately 48mm dia It has an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test A revolution counter is fitted to the frame. • control panels: auto. Preset counter, stop and start push buttons. (optional at extra cost). A tray is supplied for collecting of the material at the end of the test A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.P.M Suitable for operation on 440 volts, 3 phase, 50 cycles, a.C. Supply. • all material parts are made of stainless steel except the frame. Optional accessories (optional at extra cost): • control panels: auto. Preset counter, stop and start push buttons.
Compression testing machine used for testing the strenght of cement and concrete 900mm * 500 mm, 200 kg
Brand New 2021 Bobcat Miner 300 Helium Hotspot for HNT That Come with 1 year international Warranty
Swift MFL portable instrument with a large, premium-quality multi-touch display. Incl.2 batt., power supp., manual, rugged case. Highlights : Fast, reliable corrosion screening even in service Portable, battery-operated, sealed, large bright display Simple to learn and operate, offers a high PoD SPECS : Acquisition modes Internal Clk, Encoder Array connectors 1x IPEX Batteries - typical life 6-8 hours Cooling Sealed with internal fan Data storage SSD, 100 GB Display resolution 1024 768 Display size 26.4 cm (10.4) Display type Capacitive multi-touch, with 3 mm (1/8 in), chemically strengthened glass cover. Non-reflective (AR coating), anti-fingerprint (oleophobic coating), optically bonded LCD and touchscreen. Passive backlight enhancement Full recordable data for mapping Yes High temperature inspections Yes Highly portable easy to use system Yes Multitouch control Yes Nb. of input channels 8 Nb. of receiving elements Up to 128 Paperless Reporting Yes Precision active steering No Probability of detection 2mm diameter 20% loss Probe type MFL Rapid Coverage Yes Rope access applications Yes Setup creation/management Yes Umbilical length 5m, 10m and 15m Acquisition rate Up to 50 kHz Automatic screenshot with defect entry Yes Batteries - type 2x li-ion, rechargeable, DOT compliant Compliance EN 61010-1, CE, WEEE, FCC, Part 15B, ICES-003, RoHS Defect table (for reporting) Yes Digitizing 16-bit resolution Encoders and I/O connectors 1x 12-pin Fischer Inspection workflows Optimized, with hard buttons MFL receiver gain 23 - 64 dB Programmable alarms Yes Recordable UT data sets Yes RFT/NFT/MFL connector Yes Harness available Yes Full screen mode Yes Connectivity Gigabit Ethernet, Wi-Fi, HDMI, USB 2.0 (x3) Dimensions (W x D x H) 355 288 127 mm (14.0 11.3 5.0 in) Encoder inputs 3-axis Quadrature / Step /Dir, TTL 5V IP rating IP65 Operating humidity 95%, non-condensing Operating temperature 0 C to 40 C (32 F to 104 F) Power supply/requirements Battery Operated Programmable outputs Yes Supported Technologies/Techniques MFL Storage temperature 0 C to 40 C (32 F to 104 F) Volume 13L (793.31 in3) Weight (without batteries) 5.7 kg (12.5 lb) Video output HDMI Weight (with batteries) 6.6 kg (14.5 lb)
1101 beaker low form with spout and graduations. 1102 beaker tall form with spout and graduations. Pyrex materials, High quality with very competitive prices Exporting standard packing
Driving mode: precision lead screw, not gear wheel Micro-computer controls, LCD displays data, results and curves. Professional software supports, controlled by microprocessor in all process of testing. Each function worked independently, standard unit, free form manual intervention. Analyzes group of specimens shows the arithmetic average, maximum, minimum. Menu interface, shortcut for selecting test, and easy to learn, master, and operate. Print out results, including stretching rate, maximum pulling, stiffness an flexibility. High performance DC servo-system, adjust speed by servo-system, working quiet, stability and reliability. Parameters stored permanently while power down and protection for over-load. Standard ink-jet printer prints out test reports. Energy-saving, stillness running, high performance and low cost. DRK101A: specification: 0.01; 0.05; 0.1; 0.2; 1(kN) Load accuracy: 1 grade Speed: 1 to 500mm/minute Strength precision: 1/100000 Stretch space: 400mm Power: 0.4kW DRK101B: specification: 0.01; 0.05; 0.1; 0.2; 1(kN) Load accuracy: 1 grade Speed: 1 to 500mm/min Strength precision: 1/100000 Stretch space: 700mm Power: 0.4kW DRK101C: specification: 0.01; 0.05; 0.1; 0.2; 1;5 (kN) Load accuracy: 1 grade Speed: 1 to 500mm/min Strength precision: 1/100000 Stretch space: 900mm Power: 0.5kW DRK101D: specification: 0.01; 0.05; 0.1; 0.2; 1;5 (kN) ·+Computer controled ·¼ Load accuracy: 1 grade Speed: 1 to 500mm/min Strength precision: 1/100000 Stretch space: 900mm Power: 0.5kW Standard Wooden Package
Supplier: Training equipments, educational equipments, laboratory equipments, technical equipments, scientific equipments & material testing equipments
Trimble S6 3 DR 300 Total Station with CU Controller Used condition like new and ready to work Come with warranty 12 month. Manufacturer year : 2013 include : Total Station : - S6 Total Station, - Tribrach, - 1 x battery, - target plate, - hard carry case Controller - Trimble CU controller. - Cradle. - 1 x battery. - neck strap. - data cable. - pole bracket. - battery charger (including car charger), - hard carry case.
