Supplier: Standardeo api, bs, din, valve type, ball valve, gate valve, globe valve, check valve, butterfly valve
DIN/BS/JIS/ANSI Flange Butterfly Valve Diameter:DN50-DN1200 Connection:Flange Working pressure:1.0Mpa/1.6Mpa Temperature:0-80 Used:Water system Material Body:Ductile Iron Disc:Ductile Iron/SS304
DIN/BS/JIS/ANSI Wafer Butterfly Valve Diameter:DN50-DN600 Connection:Flange Working pressure:1.0Mpa/1.6Mpa Temperature:0-80 Used:Water system Material Body:Ductile Iron Disc:Ductile Iron/SS304
DIN valve,DIN valve Supplier materials : cast iron/ cast steel rating : PN10/PN16/PN25/PN40 size : DN15~DN250 manufacture standard: DIN 3352 test standard : DIN 3230 face to face : DIN 3202 flanged as per: DIN2543~2545
Globe valve , gs-c25, en13709, with flanges, En1092-1(b1), pn40, en gp240gh, Seats x 20cr13, ftf en558-1(1).Working Temp.Max.400¡æ.Handwheel operate. Dn15- dn250 Pn16- pn40. Material:gs-c25, 1.4408. Size:dn15- dn250.
Forged Steel Gate Valve API 602, BSEN ISO 15761, ASME B16.34, BS 6364 Pressure Rating : Class-800 Bore : Full & Regular Material : Forged Steel (A105) Description : Bolted Bonnet, OS & Yoke Type, Rising Stem (Welded Bonnet for CL-1500 & 2500) Ends : Socket Weld, Butt Weld, Screwed Operator : Hand wheel, Electric Specials : Stem Extension, LT & Cryo, Fire Safe, Seismic, FET, TAT, IBR Item Code : FCS00002 Size : 15mm Notes : Available Valve Size : CLASS-800 8mm to 50mm CLASS-1500 15mm to 40mm CLASS-2500 15mm to 25mm Material : LF2, F5, F9, F11, F22, F304, F304L, F304H, F316, F316L, F316H, F91, F51, F321H, F321
Cast Steel Swing Check Valve API 6D, BS 1868, ASME B16.34 Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Swing Type, Bolted Cover (Pressure Seal Cover CL-900, 1500 &; 2500) Ends : Flanged, Butt Weld Specials : Fire Safe, Dash Pot Arrangement, By pass Arrangement, IBR Item Code : CCS00007 Size : 50mm Notes : Available Valve Size : CLASS-150 40mm to 900mm CLASS-30040mm to 950mm CLASS-600 40mm to 600mm CLASS-900 40mm to 600mm CLASS-1500� � 40mm to 600mm CLASS-2500 50mm to 300mm Material : LCB, WC1, WC6, WC9, C5, C12, C12A, CF8, CF8C, CF8M, CF3, CF3M, CN7M, CF10, CF10M, 3A, 4A, 5A, 6A etc.
API 602 Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
