This unit sense current for over current or earth fault protections, 1kg, height 105mm base 102 * 51mm
Voltage Monitoring Series SM 501 86 Cat. No. Parameters MG53BH MG53BF MG63BH MG63BF 415 VAC (3 Phase, 3 Wire) 220 VAC (3 Phase, 3 Wire) Frequency Power Consumption (Max.) 10 VA 5 VA 50/60 Hz Supply Voltage ( ) 105% to 125% (of ) 55% to 95% (of ) Trip Settings Under Voltage Over Voltage Hysterisis 7 V (�± 2 V) of Trip Voltage Phase Loss Phase Sequence Phase Asymmetry Yes Yes LED Indication Storage Temperature Operating Temperature Separate indications for Power ON, UV and OV; ON: Phase Reverse; BLINK: Phase Asymmetry O -15 C To + 55 C O O -25 C To + 70 C O Utilization Category AC - 15 DC - 13 Rated Voltage (Ue): 120/240 V, Rated Current (Ie): 3.0/1.5 A Rated Voltage (Ue): 24/125/250 V, Rated Current (Ie): 2.0/0.22/0.1 A Output Contact Rating Electrical Life Mechanical Life Relay Output 5A @ 250 VAC / 28 VDC (Resistive) 5 1X10 6 3X10 2 C/O Enclosure Dimension (W x H x D) (in mm) Weight (unpacked) Mounting Certification Flame Retardant UL 94-V0 36 X 90 X 60 120 g Base / DIN rail Degree of Protection IP 20 for Terminals, IP 40 for Enclosure ORDERING INFORMATION Note: 1) Voltage Setting Accuracy: �± 5 % of Full Scale; Time Setting Accuracy: �± 10 % of Full Scale 2) In the event of Phase Sequence or Phase Loss, OFF Delay is 100 ms Humidity (Non Condensing) 95% (Rh) 0.5 to 15 s (Selectable) 5 s 0.5 to 15 s (Selectable) 5 s 0.5 to 15 s (Selectable) 5 s 0.5 to 15 s (Selectable) Time 5 s Delay ON Delay Trip Time (OFF Delay) 10% (of ) Cat. No. Description MG53BH 415 VAC, & Single Phasing Preventor (SPP) with Selectable ON Delay (0.5 to 15 sec), 2 C/O MG53BF 415 VAC, UV / OV & SPP with Selectable OFF Delay (0.5 to 15 sec), 2 C/O MG63BH 220 VAC, with Selectable ON Delay (0.5 to 15 sec), 2 C/O MG63BF 220 VAC, with Selectable OFF Delay (0.5 to 15 sec), 2 C/O UV / OV UV / OV & SPP UV / OV & SPP EMI / EMC Harmonic Current Emissions IEC 61000-3-2 Ed. 3.2 (2009-04) Class A ESD IEC 61000-4-2 Ed. 2.0 (2008-12) Level III Radiated Susceptibility IEC 61000-4-3 Ed. 3.2 (2010-04) Level III Electrical Fast Transients IEC 61000-4-4 Ed. 3.0 (2012-04) Level IV Surges IEC 61000-4-5 Ed. 2.0 (2005-11) Level IV Conducted Susceptibility IEC 61000-4-6 Ed. 3.0 (2008-10) Level III Voltage Dips & Interruptions (AC) IEC 61000-4-11 Ed. 2.0 (2004-03) All 7 Levels Conducted Emission CISPR 14-1 Ed. 5.2 (2011-11) Class A Radiated Emission CISPR 14-1 Ed. 5.2 (2011-11) Class B Environmental Cold Heat IEC 60068-2-1 Ed. 6.0 (2007-03) Dry Heat IEC 60068-2-2 Ed. 5.0 (2007-07) Vibration IEC 60068-2-6 Ed. 7.0 (2007-12) 5g Repetitive Shock IEC 60068-2-27 Ed. 4.0 (2008-02) 40g, 6ms Non-Repetitive Shock IEC 60068-2-27 Ed. 4.0 (2008-02) 30g, 15ms RoHS Compliant LED Indications for Power and Fault conditions Voltage Sensing Principle 2 C/O Configuration
Protects against Phase Loss, Phase Reversal & Phase Asymmetry Can be configured for 3 Phase 4 Wire or 1 Phase system Selectable Over Voltage / Under Voltage Trip level Selectable Time Delay LED Indications for Power and Fault conditions Voltage Sensing principle 1 C/O or 2 C/O Configuration Voltage Monitoring Series SM 500 83 Cat. No. Parameters 240 VAC (1 Phase & 3 Phase, 4 Wire) Frequency Power Consumption (Max.) 4 VA 50/60 Hz Supply Voltage ( ) 105% to 125% (of ) 55% to 95% (of ) LED Indication Operating Temperature Storage Temperature Separate indications for Power ON, UV and OV O O -15 C To + 55 C O O -25 C To + 70 C Utilization Category AC - 15 DC - 13 Rated Voltage (Ue): 120/240 V, Rated Current (Ie): 3.0/1.5 A Rated Voltage (Ue): 24/125/250 V, Rated Current (Ie): 2.0/0.22/0.1 A Trip Settings Under Voltage Phase Loss Phase Sequence Phase Asymmetry Over Voltage 0.5 to 15 s (Selectable) 5 s 0.5 to 15 s (Selectable) 5 s 5 s 0.5 s to 15 min (Selectable) Time Delay ON Delay Trip Time (OFF Delay) Output Contact Rating Electrical Life Mechanical Life Relay Output 5A @ 250 VAC / 28 VDC (Resistive) 5 1X10 6 3X10 1 C/O Enclosure Dimension (W x H x D) (in mm) Weight (unpacked) Approx. Mounting Certification Flame Retardant UL 94-V0 36 X 90 X 60 120 g Base / DIN rail Degree of Protection IP 20 for Terminals, IP 40 for Enclosure ORDERING INFORMATION Note: 1) Voltage setting is with respect to Neutral. Voltage Setting Accuracy: �± 5 % of Full Scale; Time Setting Accuracy: �± 10 % of Full Scale RoHS Compliant Humidity (Non Condensing) 95% (Rh) EMI / EMC Harmonic Current Emissions IEC 61000-3-2 Ed. 3.2 (2009-04) Class A ESD IEC 61000-4-2 Ed. 2.0 (2008-12) Level II Radiated Susceptibility IEC 61000-4-3 Ed. 3.2 (2010-04) Level III Electrical Fast Transients IEC 61000-4-4 Ed. 3.0 (2012-04) Level IV Surges IEC 61000-4-5 Ed. 2.0 (2005-11) Level IV Conducted Susceptibility IEC 61000-4-6 Ed. 3.0 (2008-10) Level III Voltage Dips & Interruptions (AC) IEC 61000-4-11 Ed. 2.0 (2004-03) All 7 Levels Conducted Emission CISPR 14-1 Ed. 5.2 (2011-11) Class A Radiated Emission CISPR 14-1 Ed. 5.2 (2011-11) Class A Environmental Cold Heat IEC 60068-2-1 Ed. 6.0 (2007-03) Dry Heat IEC 60068-2-2 Ed. 5.0 (2007-07) Vibration IEC 60068-2-6 Ed. 7.0 (2007-12) 5g Repetitive Shock IEC 60068-2-27 Ed. 4.0 (2008-02) 40g, 6ms Non-Repetitive Shock IEC 60068-2-27 Ed. 4.0 (2008-02) 30g, 15ms Cat. No. Description MD71BH 240 VAC, UV / OV with Selectable ON Delay (0.5 to 15 sec), 1 C/O MD71BF 240 VAC, UV / OV with Selectable OFF Delay (0.5 to 15 sec), 1 C/O MD71B9 240 VAC, UV / OV with Selectable ON Delay (0.5 s to 15 min), 1 C/O
Supplier: Electronic and automation parts like plc relay
Supplier: Relays for automation & protection
Introduction Standard Meter test offers test of internal standard power &automatic calibration. Clamp inputs and direct inputs are at usersí» option when it comes to external input. Possess two functions of Faults Recorder and Faults Replay. And the two functions mentioned above can serve field technicians to analyze the faults concerned. Possess Remote Diagnosis which allows users to monitor the output state of meters by Internet from remote places. The running state of the machine can be identified by error comparison of sample values against data output of remote data acquisition instrument. Capable of testing all types of voltage relays, current relays, frequency relays, power relays, impedance relays, harmonics relays, differential relays and synchronism Check relays by manual or by automation. Fault Simulation calibrates nominal values of distance protection device and zero-sequence protection device. And fault simulations also lead to distance relay test of distance protection device and zero-sequence protection device. And K2066 can auto-scan the ratio braking curve of differential protection in microcomputer and digital transformer as well as Generator-transformer Group. And K2066 possesses GPS Synchronizer. The installation of particular heating radiator contributes to the safety of K2066 There are four high-power ventilating fans inside the Host. Thermal-shutdown is adopted to ensure the excellent stability & reliability of the amplifier even under long-playing working state along with high current. Current generator provides the function of open-circuit protection and open-circuit alert in itself. While Voltage generator possesses the functions of short-circuit protection, of output testing against waveform distortion, of Auto-recognition & Auto-alarming & Self-lock protection against wrong wiring as well as the function of Dynamic Waveform Monitor& Display. Possess isolated output contacts, and the same case for idle contacts and electric potential contacts; and well adapt to various wiring installation. Possess 7-channels voltage output; That one optional channel can works as auxiliary power supply by setting software shall make it easier for site-commissioning. Possess well-structured offline running function, the Host has independent output of 7 voltages & 6 currents of which amplitude, phase and frequency are continuously adjustable at usersí» option. And large LCD screen 640*480 is installed and its interface display is legible in English version. Internal design is architectural style framework and high intensity aluminum alloy box of which vibration & shock resistance enables the equipment subject to strict vibration. With the application of the latest DSP and large-scale programmable components FPGA from TI Company in United States as well as 1448-dot waveform simulation, K2066 possesses better Transient Response and better Amplitude-frequency Characteristic. Besides, at present KINGSIN stands as the exclusive manufacturer in China who initiates the application of 20-digit serial port DA to further improve the output precision. Weight:24 KG Dimensions 420ú¿Dú¬í-140 (W)í-360 (H) mm
XLogic SuperRelay is a compact and expandable CPU replacing mini PLCs, multiple timers, relays and counters. The xLogic SuperRelay perfectly fits in the space between timing relays and low-end PLCs. Each CPU incorporates not only a real-time clock and calendar, but also provides support for optional expansion I/O modules to enhance control and monitoring applications. The xLogic SuperRelay is the ideal solution for relay / PLC replacement, or simple control applications as building and parking lot lighting, access control, watering systems, pump control, ventilation systems, home automation and a wide field of applications demanding low cost to be a primary design issue. CE Approved. SMS Modules. Ethernet Modules. Expansion Modules. Standard & Economy Models. Free of Charge Configuration Software. XLogicSoft allows the user easy programming and configuration of each module directly from the user PC or Laptop. With guaranteed "free for life" software updates you will always have access to the latest software enhancements. Download the software and evaluate at ease via our website. Click here to start your download! Free of Charge. East & quick function block programming. Free upgrading to future software versions. Online Monitoring / Offline Simulation mode ETHERNET? No problem, the xLogic Super- Relay is Ethernet friendly. With The use of the ELC-E module Ethernet connectivity can be Added instantly. Need more connectivity? Also not a problem, using the widely accepted MODBUS protocol the xLogic "speaks your language' and easily connected to a wide range of devices. SMS GSM MODULE Incorporating the ELC-SMS -D-R module into your system allows the user full remote monitoring as well as remote control of the application via SMS (Short Message Service) on any GSM phone or PDA. Worldwide availability, low operating Cost, easy installation and integration In combination with high reliability makes SMS remote control and monitoring a desirable option in hard to reach, distant or hazardous environments. EXPAND to cover big needs Connect up to 31 additional "expansion "modules (depending on the exact model used) via CANBUS and expand your system to fit the exact needs of your application.
Supplier: Relays For Automation & Protection
Next Power is the industry's leading independent supplier not only on and also of specialist of Relay and timer Supplies. Relay and timers suppliers in Worldwide. We can provide us with authentic products in product information and costumer relationship. We are mainly dealing with our own brand be like OMRON, SIEMENS, ABB, ANLY ELECTRONICS, AUTONICS, CARLO GAVAZZI, CELDUC, EATON, DANFOSS, FINDER,.etc We have a wide variety of Relay and timers products and all type of electronics items, We believe that you can also provide it in a better way. We supply these relay and timers to more suppliers in DUBAI-UAE, We have a wide variety of branded products. Finder, Omron, Schneider Electric, Corsair, Meanwell, Siemens, Festo, Long - Power plus battery..etc.
