Electrical Conduit
An electrical conduit is a tube used to protect and route electrical wiring in a building or structure. Electrical conduit may be made of metal, plastic, fiber, or fired clay. Most conduit is rigid, but flexible conduit is used for some purposes.
Features: Galvanized steel, square-locked core with cord packing from 3/8" to 1-1/4", interlocked core from 1-1/2" to 4" to give additional strengh to prevent unravelling Smooth wipe clean PVC jacketed Liquid-tight IP66/IP67 Good flexibility High mechanical strength Flame retardent UV protection moisture proof Resistance to most of chemicals, such as oil, acids and vapours, etc. Good Absorption of motion and vibration Cover does not winkle when bent Temperature range from -25oC to +90oC PVC colour black (standard), grey or orange (made to order) Nickel plated brass fittings Galvanized malleable iron fittings Stainless steel fittings Applications: General indutrial installations and wire protection Outdoor installation Machine tools Installations where liquid-tight is a requirement Special Applications: According to customer's samples and specifications, we can manufacture the LT type flexible conduit to suit special applications, such as wider temperature range, specific chemical resistance, etc. Smooth wipe clean PVC jacketed Liquid-tight IP66/IP67 Good flexibility High mechanical strength Flame retardent UV protection moisture proof Resistance to most of chemicals, such as oil, acids and vapours, etc. Good Absorption of motion and vibration Cover does not winkle when bent Temperature range from -25oC to +90oC PVC colour black (standard), grey or orange (made to order) Nickel plated brass fittings Galvanized malleable iron fittings Stainless steel fittings
Product Name: HDG Class 4 Steel Conduit Size: 20MM 25MM 32MM Outside Diameter: 19.7mm-20mm 24.6mm-25mm 31.6mm-32mm Wall Thickness: 1.6mm�±0.15mm 1.6mm�±0.15mm 1.6mm�±0.15mm Lengthï¼? 3M/3.75M/4M 3M/3.75M/4M 3M/3.75M/4M Pack. qty: 10ï¼?100ï¼?400 10ï¼?100ï¼?320 10ï¼?100 Material: Q195, Q235 Surface treatment: Hot Dipped Galvanized Standard: BS4568/EN61386/ AS/NZ 2053.7
1)Good flexibility. Good bending performance. 2)Resistant to weak acid, grease.Anti-friction. 3)Durable. 4) Easy, tool-free assembly. 5)Standard hole diameters. 6)Single Openning Split PP Conduit. 7)Using Method: place cables in conduit, fixed with adaptor or fittings. 8)Application: Allows the cables to be mounted in to machines, equipment, control panel cabinets and walls with only a few steps. For Mechanical manufacturing, electrical insulation system, lighting device,car manufacturing, aviation device, metro, train, automation controlling systems. And wherever the requirements of UL94 V0 are demanded.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)