SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
product origin : Middle East
Heavy Melting Steel (HMS): Heavy melting steel is a designation for recyclable steel. It is categorised into two major categories: HMS 1 and HMS 2. The difference between the two is HMS 1 does not contain galvanized and cast iron, whereas HMS 2 does. Because both grades guarantee a minimum piece thickness â?? at least 1/4inch (6.3mm) for HMS 1, and 1/8 in for HMS 2 â?? consignments have a high density. The typical constituents are plates, truck parts, structural items, large machinery parts, automatic parts, pipes, post consumer steel goods. Quality Heavy metal ,Iron Scrap/ Metal scrap HMS 1 and HMS 2 scrap steel for sale
C: 0.54-0.8% Si: 0.18-0.40% Mn: 0.60-1.05% S: 0.04% Max P: 0.035% Max Used rails R50-R65 Under 200-202 International Standard ISRI Code 27-29 R50 R65 Harmonization System (HS) Code : 730210
We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%
Specifications :- used rails - R50/R65 Carbon (C): 0.54 0.082% Manganese (Mn) 0.75 - 1.05%, Silicon (Si): 0.18 0.40%, Phosphorous (P): Max. 0.035%, Sulphur (S): Max. 0.045%, Arsenic (Ar): Max. 0.15% Width: 0.5 m Iron Balance: Norms R50 Gost 7173-73 and R65 Gost-8165-75 R50(51.67KG/M)-Gost- 7173-75 R65(64.72KG/M)- Gost- 8165-75
Used Rail Available Supplier Worldwide
C 0.54 -0.82 Si 0.18 - 0.40 Mn 0.60 - 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75 In ferrous we mainly deal in HMS1 & 2 Material Specification Heavy Melting Scrap (HMS 1& 2) ,80% HMS 1 & 20 % HMS 2 confirming to ISRI 200-206 HMS 1 ISRI Code 200: heavy melting steel. Wrought iron and/or Steel scrap inch or steel scrap inch and over in thickness. Individual pieces not over 60 x 24 inches HMS 1 ISRI Code 201: heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap HMS 1 ISRI Code 202: heavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap HMS 2 ISRI Code 203: heavy melting steel. Wrought iron or Steel scrap, Black and Galvanized. 1/8 inch and over in thickness, charging box size to include material not suitable as no.1 heavy melting steel. HMS 2 ISRI Code 204: same as ISRI 203 but max size 36-18 inches. HMS 2 ISRI Code 205: same as ISRI 204 but free of sheet iron or thin-gauged material. HMS 2 ISRI Code 206: same as ISRI 204, but max size 60 x 18 inches
Dear Sirs: We are the sellers mandate of a big producer of 2nd class rails R50 and R65 in Unlike some other stuff of iron and steel, our railway rails are subject to very high stress level and are made of very high-quality steel. Moreover, if requested by the Buyer, they can be cut down to 1 m long with no extra charge. Delivery per month: Minimum - 50.000 MT; Maximum - 350.000MT Total delivery ( MOQ) - 200.000 MT Packing: Break bulk or Container Inspection: Loading port by SGS or other reputed agency on Unloading port: SGS or other reputed agency on expenses, if required. Terms of delivery: CIF. If you are a possible buyer of this stuff or other related products, we will be very much obliged if you have the kindness of keeping in touch with us, in order to provide you our SOP, as well as the best possible prices and conditions. Our team will be at your disposal for whatever doubt you may have.
Products: HMS 1 and HMS 2 Metal Scrap Grade: AA Type: Rail Scrap, Casting Irons etc Metal: 100% Alloy Or Not: Non-Alloy Color: Multiolor Secondary or not: Non-secondary
