Ecosafe-sap is super absorbent bio polymers are primarily used as absorbent for biological fluids, water and aqueous solutions. Ecosafe-sap super absorbent polymer can be employed in various applications. Such as in disposable sanitary products (i.E, diapers, incontinence articles, female hygiene products and absorbent dressings.) household articles, sealing materials (agriculture/horticulture), absorbent paper products, wound dressings and as chemical absorbents. Furthermore ecosafe-sap also employed in applications related to the transportation of fresh food or sea food as well as in food packaging applications. Polyacrylates obtain from the polymerization of monomers such acrylic acid and acrylamide. However their biodegradability is questionable, especially for higer molecular weight polymers, polyacrylates generally contain small amounts of residual monomeric starting materials i.E, acrylic acid and acrylamides possessing both toxic and allergenic potential. While ecosafe-sap is biodegradable and hypoallergenic. Non toxic and harmless to human body and safe for environment. 25 kg
Polyacrylamide is called as PAM for short and it is polymerized by the acrylamide monomer. PAM is a kind of linear water-soluble polymer matter. With different techniques and functional groups, products with different types of charge can be obtained, including the anionic polyacrylamide (APAM), cationic polyacrylamide (CPAM), non polyacrylamide (NPAM) and amphoteric polyacrylamide (ACPAM). The average molecular weight of PAM ranges from thousands to millions and it is the high-molecular electrolyte. It is the white power or granule, and it can be dissolved in the water easily but not the common organic solvents including the benzene, ether, ester, acetone, etc.. The aqueous solution of polyacrylamide is the thick liquid, and it is non-toxic and non-corrosive. The solid PAM is hygroscopic, and the hygroscopicity is improved with the increasing of ionic degree. Use characteristics 1) Flocculability: The PAM plays the role of flocculation for the suspended matter through electrical neutralization, bridging and adsorption. 2) Adhesivity: It has the adhesive effect based on the mechanical, physical and chemical role. 3) Resistance reducing: PAM can effectively reduce the frictional resistance of fluid, and adding a minute amount of PAM into water can reduce the resistance by 50-80%. 4) Thickening: PAM has the effect of thickening both under the neutral and acid conditions. When the pH is greater than 10, PAM can have the easy hydrolysis. Besides, the effect of thickening will be more obvious when the PAM has the semi-mesh structure.
Amps monomer English name:2-acrylamide-2- methyl propane sulfonic acid Cas#:15214-89-8 Molecular formula:c 7 h 13 no 4 s Structural formula:ch 2 =chcon2 2-acrylamido-2-methyl propane sulfonic acid is a kind of vinyl monomer that contains sulfonic acid gene. With sound performances of complexation, absorption, bioactivity, surface activity. Hydrolysis and heat stability, in the aqueous solutions, its hydrolytic speed is low, and its sodium salt has sound performance of anti-hydrolysis under the term of high ph value. Under the term of acidity, the performance of anti-hydrolysis of its multipolymer is far higher than that of polyacrylamide. 2-acrylamido-2-methyl propane sulfonic acid can be used not only to copolymerization, but also to homopolymerization. 2-acrylamido-2-methyl propane sulfonic acid can be widely used in the fields of oil chemistry, water-treatment, synthetic fibre, dyeing, plastic, absorbent coating, paper-making, biomedicine, magnetic material and cosmetics etc
1.Chemical name: Poly Acrylamide (PAM) 2. CAS: 9003-05-8 3.Performance:White crystal 4. Application: polyacrylamide (PAM) is one of the most widely used water-soluble polymers. It is widely used in oil exploitation, papermaking, water treatment, textile, medicine, agriculture and other industries. There are three forms of polyacrylamide products: aqueous colloid, powder and emulsion. According to the characteristics of ions, it can be divided into four types: non-ionic, anionic, cationic and amphoteric. 5. Methods of use: before use, prepare the product with deionized water to a solution of 2-5 thousandth of molecular weight according to the proportion of use. In the process of configuration, the agitation should not be too intense, so as to prevent the polymer chain of the product from breaking due to the shear action and affect the use effect of the product. The prepared product solution should be prepared and used first, and the storage time should not exceed 24 hours. The simulated screening in the laboratory can determine the approximate dosage of the product, but it is necessary to adjust the super final dosage according to the site conditions. V. packaging and storage: kraft paper bag for external use, with plastic film package inside, net weight of each bag is 25kg, which can also be modified according to the user's requirements. The product is hygroscopic and should be stored in a cool and dry place with temperature lower than 35 ºC. Solid products shall not be scattered on the ground to prevent the ground from sliding after the product absorbs moisture. 6. Safety protection: pay attention to labor protection during operation, and avoid contact with skin, eyes, etc. 7. Specifications: ITEM Index Type 1 Type 2 Solid content (solid),w/% â?¥ 90.0 88.0 Acrylamide monomer content w/% â?¤ 0.025 0.05 Dissolution time (anionic) /min â?¤ 60 90 Dissolution time (non-ionic) /min â?¤ 90 120 Screen residue (1.00mm screen),w/% â?¤ 5 10 Screen residue (180 μ m screen),w/%â?¥ 85 80 Insoluble (anionic),w/% â?¤ 0.3 2.0 Insoluble (non-ionic),w/% â?¤ 0.3 2.5
product name:AMPS English name£º 2-Acrylamide-2- Methyl Propane Sulfonic Acid CAS#£º 15214-89-8 molecular weight£º 207.24 molecular formula£º C 7 H 13 NO 4 S structural formula£º CH 2 =CHCON £¨ CH 3 £© 2 appearance: white crystal powder PROPERTIES: 2-Acrylamido-2-methyl propane sulfonic acid is a kind of vinyl monomer that contains sulfonic acid gene. with sound performances of complexation, absorption, bioactivity, surface activity. hydrolysis and heat stability, in the aqueous solutions, its hydrolytic speed is low, and its sodium salt has sound performance of anti-hydrolysis under the term of high PH value. Under the term of acidity, the performance of anti-hydrolysis of its multipolymer is far higher than that of polyacrylamide. USAGE: 2-Acrylamido-2-methyl propane sulfonic acid can be used not only to copolymerization, but also to homopolymerization. It can be widely used in the fields of oil chemistry, water-treatment, synthetic fibre, dyeing, plastic, absorbent coating, paper-making, biomedicine, magnetic material and cosmetics etc Applications: Co Monomer in Acrylic Fiber Industry Co Monomer in Surfactants for Personal Care products Oil Industry ( Drilling Mud Additives, Oil enhance recovery) Water Treatment - Corrosion inhibitor silt control Paper and Pulp- Filter aid sizing dispersant In Mining as Flocculants The usable methods and levers are not the same in different fields, please follow the specialist¡¯s advice. PACKING & STORING: Packed in net 25KG packing, stored in ventilative cool place indoors. The storage period is 1 year
SINOFLOC anion polyacrylamide flocculant are co-polymers of acrylamide with increasing proportions of acrylate groups, which give the polymers negative charges, and thus anionic active character, in aqueous solution. We can offer two types of products of polymer flocculant powder and anionic polyacrylamide emulsion. anionic polymer flocculant polyacrylamide msds above is only a brief indtroduction. For more details, please contact us.For more details about anionic polyacrylamide powder, please contact us. Anion Polyacrylamide Feeding: The solutions of SINOFLOC flocculant polyacrylamide must be prepared in suitable plants equipped with dry powder feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10�°C and 40�°C; For a correct use of SINOFLOC anionic polyacrylamide polymer and in order to achieve the best possible results, it is necessary to allow a "maturation" time of 60 minutes. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thor ough and homogeneous mixing without impairing the flock formation. Recommend operating concentration of anionic polyacrylamide copolymer is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific applications on anionic polymer, please consult with SINOFLOC team. There are many polyacrylamide anionic polyacrylamide distributors , but we are one of the best choices for you. If you are looking for a reliable anionic polyacrylamide manufacturer , please contact us. For more information about anionic polymer, please feel free to contact us!
SINOFLOC cationic flocculants are co-polymers of acrylamide with increasing proportions of cationic monomers. The cationic groups, which are thus introduced into the polymer, have positive charges in aqueous solution. Our cationic polyacrylamide powder is available in solid powder and emulsion forms. Products Feeding: The polyacrylamide is a synthetic cationic polymerization flocculants and polymer flocculant powder. It is mainly related to chain length and the charge of the dewatering performance of polyacrylamide excessive dosage. The positive charge on the ion polyacrylamide adsorption, due to electrostatic repulsion, it will reduce the sludge settling performance. Therefore, we should pay attention to investment in overtime to calculate in advance the proper dosage. The solutions of SINOFLOC cationic polyacrylamide for chemical applications must be prepared in suitable plants equipped with dry powders feeding and dispersion units and with continuous and moderate agitation. The dissolution water must have a temperature included between 10�°C and 40�°C; For a correct use of SINOFLOC polymer cationic polyacrylamide powder and in order to achieve the best possible results, it is necessary to allow a â??maturationâ?? time of 60 minutes for the coagulation of water. When treating turbid water, the flocculants solution must be added to the water in a point of average turbulence, in order to achieve a thorough and homogeneous mixing without impairing the flock formation. Recommend operating concentration is 3g/l, and the maximum operating concentration is 15g/l. For an optimum performance on specific polyacrylamide applications on cationic polymer, please consult with SINOFLOC team.
