Bitumen 80/100 is widely recognized as one of the preferred bitumen grades for various industrial applications, including road construction and other projects. The product's specifications are meticulously documented and certified by reputable entities such as SGS or other third-party inspection companies. This ensures that the quality and performance of Bitumen 85/100 meet stringent industry standards, guaranteeing reliability and efficacy in diverse applications.
Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by ASI GLOBAL TRADE is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by ASI GLOBAL TRADE is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. Designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. SPECIFICATIONS : CHARACTERISTIC TEST METHOD UNIT MIN. MAX. Specific gravity at 25°C ASTM D70 °C 1.01 1.05 Penetration at 25°C ASTM D5 mm 80 100 Softening Point ASTM D36 °C 42 52 Ductility at 25°C ASTM D113 Cm 100 - Loss on heating ASTM D6 % 0,5 Flash Point ASTM D92 °C 225 Solubility in Trychloroethyelene ASTM D2042 % 99 Performance after RTFOT Method Test to ASTN D1754: - Change in mass (m/m) ASTM2872 % - 0.5 - Retained Penetration 25°C, 100g, 5s (% of original) ASTM D5 % 50 - - Increase in softening point ASTM D36 °C - â?¤8 - Softening point after hardening ASTM D36 °C 45 - LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of ASI GLOBAL TRADE products, are given in good faith based on ASI GLOBAL TRADE current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with ASI GLOBL TRADE recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. ASI GLOBAL TRADE reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
Bitumen 80/100 Test method Unit Specification Specific gravity @ 25 ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25 ASTM D5 mm/10 80/100 Softening point ASTM D36 42/50 Ductility @25 ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flash point ASTM D92 250 min Solubility is CS2(wt) % ASTM D4 wt % 99.5 min Spot test A.A.S.H.O.T102 Negative
Bitumen 80/100 Test method Unit Specification Specific gravity @ 25°c ASTM D70 Kg/cm3 1.01/1.06 Penetration @ 25°c ASTM D5 mm/10 80/100 Softening point °c ASTM D36 °C 42/50 Ductility @25 °c ASTM D113 cm 100 min Loss on heating(wt) % ASTM D6 wt % 0.2 max Drop in penetration after heating % ASTM D5-D6 % 20 max Flash point °c ASTM D92 °C 250 min Solubility is CS2(wt) % ASTM D4 wt % 99.5 min Spot test A.A.S.H.O.T102 Negative
Penetration Bitumen 80-100 are used as components for road and airport constructions and other similar application. This product must not be used in applications other than the above without first seeking the advise of the supplier.
BITUMEN 80/100 TECHNICAL DATA: SAMPLE NO. SPECIFICATION Penetraction Grade MIN. MAX Penetraction 25 ¦c (100g.5s)0.1mm 80 100 Penetration (AFTER RTFOT )% of original pen 50 Softening Point (Ring and Ball ) ¦c (NEAT) 45 52 Softening Point (R & B) after loss on heating (5hrs 163 ¦c) ¦c Softening Point (AFTER RTFOT ) ¦c 45 Flashpoint (Cleveland Open Cup ) ¦c 225 Viscosity at 135¦c (VIRGIN ) cst Viscosity at 135¦c(AFTER RTFOT) cst CHANGE 300% Ductility at 25¦c cm 100 Ductility at 25¦c (AFTER rtfot)cm 75 Specific gravity at 25¦c g/cc 1.00 1.05 Thin Film Oven Test (TFOT) (5hrs at 163¦c)% 0.5 Solubility in Trichloroethylene % 99 Loss on heating (5hrs.163¦c) % max. 0.5 Penetration on residue(100g -5s)% of initial Pen Min. 80
Bitumen 80/100
We are firm interest in the " Bitumen " product under the following terms and conditions: Product: Penetration Grade Bitumen [80/100] Quantity: 50k tones per month. Contract: 12 Months. Price: CIF 220 USD Trial Shipment: 10 kg. Terms of Payment: CIF, Jakarta - Indonesia
Price : USD 220/MT
Specification Value Test Method Penetration @25°C 85-100 ASTM D-5 Specific Gravity @ 25°C 1.01-1.06 ASTM D-70 Softening Point °C 45-52 ASTM D-36 Flash Point °C 225 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.5 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Bitumen Penetration Grade 85/100 (also known as 80/100) is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses .
