Our general purpose heavy-duty vector Variable Frequency Drive (VFD) provides sensorless vector control in machining tools, ceramic machinery, hoisting cranes, air compressors, and other tools in petroleum and chemical, textile, and engineering industries. Sustainability, flexibility, and ease of use are all designed into the drive, helping you make complicated tasks simple. With high torque and failure-free operation, the VFD is efficient and flexible in its application and features overload and current-limiting safety features. You can count on our drive series for constant, high quality performance.
Model SCS/ZCS-H ferroconcrete platform tuck scale. Technical indexes Accuracy class: iii Rated capacities: 10, 15, 20, 30, 40, 50, 60, 70, 80, 100 and 120t Widths of platform: 2, 2.2, 2.5, 3 and 3.2m Lengths of platform: 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16 and 18m Foundation form: no foundation pit and shallow foundation pit Counts: 3000 (note: counts=maximum capacity/division) Overload limit: 125% Platform operating temp. (including sensor) :-30 - +65 Operating humidity rh: 20-85%. Sea-worthy packing.
Pilot Press GMP Model Salient Features of Mini Tablet Press:- Available in "B" & "D" Tooling in both models. Single Rotary Tablet Compression Machine Turret speed up to 42 RPM Force feeder with A.C.V.F Drive (Pilot Press II only) A.C Inverter Drive for main motor Inbuilt pre-compressoin (Pilot Press-II only) Adjustable upper punch penetration (Pilot Press II only) Low noise level. User friendly access Operator safety through upper guard interlocking PLC system as an optional feature (Pilot Press II only) Central Driven Slotted Turret Fitted with Thrust Bearing Table top model for easy mobility Granules are fed through open Feed Frame which ensure easy setting and minimum wastage of material Adaptability to both gravity feeder and force feeder enhances its versatility Safety Features like MCB for overload protection and Limit Switch at Upper Guard Easy to operate, maintain and clean Machine is totally enclosed i.e. top half of the machine (Compression Zone) with acrylic covers and lower half of the machine complete with matt finish SS covers.This reduce the noise level and to and fro flows of dust between compression Zone and Machine zone. Optional Features for Mini Tablet Press SS 316 contact parts. Dyna Mount. Hence no foundation required IQ,OQ,DQ documents and test certificate provided on request 1.5 HP / 960 RPM / 3 Phase with three steps pulley Overall Dimension (L x B x H) (mm) 630 x 680 x 1210 Machine Net Weight (kgs)415.
Product introduction The multi-functional single-column electronic tensile testing machine GBH-2 is a mechanical property testing machine developed and manufactured by GBPI R&D team based on GB, JIS, ASTM, DIN and other standard requirements and market demands. The instrument uses high-precision sensors, and the force measurement accuracy is within ±0.5 %FS; high-precision ball screws are used for loading, stable loading, and long life of the testing machine; professional software support, fully automatic operation, equipped with color touch screen, real-time display of test curves Data and test reports can be queried, and the test is convenient and fast; the control measurement unit can be built-in or external, with perfect limit protection, overload protection, emergency stop and other safety protection functions. It is suitable for tensile, peeling, heat sealing, tearing, puncturing, compression, bending, shearing and other tests of various metal and non-metallic materials, and then calculates parameters such as breaking strength and elastic modulus of materials, and can also be used in the medical industry It is an indispensable testing equipment for physical property testing, teaching research, quality control, etc. Standards ASTM D828 ASTM E4 ASTM D882 ASTM D1938 ASTM D3330 ASTM F88 ASTM F90 ISO 37 JIS P 8113 QB/T 2358 etc.
Customized U girder LRT bridge erecting beam launcher manufacturer is a professional design for U type bridge machine required for erection of city rail transit construction beam. As a kind of structure section, the U beam has good noise reduction effect, low construction height, high utilization ratio of cross section space. Because of U type beam for thin-walled opening structure, the traditional bridge rack beam cannot be applied directly. Unable to realize the traditional function of carrying beam traversing, beam body installation can only be achieved by traversing the crane. Therefore Shenghua heavy group U type bridge erecting machine with "front overhead crane beam, acquired vehicle girder, two cranes synchronous walking, then synchronized fall beam" of the process, simple operation, safe and stable. Safety is the most important issue for cranes. To ensure the safety, the following safety devices are equipped in Customized U girder LRT bridge erecting beam launcher manufacturer. 1.Crane traveling limit switch. 2.Overload protection device. 3.Lifting height limit device. 4.Voltage lower protection function. 5.Phase sequence protection function. 6.Emergency stop function. 7.Rain cover for outside hoist, driving units, electric cubicle. 8.Warnings indicator: flashing nights and warning sounds. 9.Wire-less infra-detector for anti-collusion.
Equipment summary: RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ±1% / the value ±0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:±0.5% / tolerance: ±0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Features + Benefits Features for Hobart AirForce 12ci Plasma Cutter with Built-In Air Compressor Inverter, 115V, 12 Amp Output, Model 500564 Lightweight, powerful inverter design New XT12R torch is more efficient and comfortable with an ergonomic handle and cables that are extra flexible Built-in piston-driven air compressor Cuts mild steel up to 1/8in. 10in. per minute; 1/4in. mild steel 3in. per minute Also cuts stainless steel, aluminum, brass and copper Thermal overload protections Post-Flow Cooling cools torch after cut to extend life of the XT consumable tips and electrodes Fan-on-demand system runs only when needed Diagnostic LED lights indicate system status 5/3/1 Industrial Warranty 5 year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes 3 year warranty on drive systems, PC boards, solenoid valves, switches and controls 1 year warranty on MIG guns, plasma torches, relays, contactor, triggers, regulator, accessories, spool guns, battery, field options and running gear. (90 days for industrial use.) Normal wear items such as drive rolls, contact tips, nozzle, gas diffuser, plasma torch tips and electrodes and weld cables are not covered under warranty Key Specs Item 48736 Manufacturer's Warranty 1 year Limited Warranty Ship Weight 33.0 lbs Volts 115 Compressor Included Yes Pilot Arc No Amps 12 Cutting Thickness (in.) 1/8 (mild steel) Sever Thickness (in.) 1/4 Duty Cycle 35% at 12A Plasma Gas Flow/Pressure Preset w/built-in compressor Clamp Cable Length (ft.) 12 Power Cord (ft.) 6 Cart No Dimensions L x W x H (in.) 8 x 13 x 10
Multimeter MF500 high-precision mechanical pointer meter inner magnetic outer magnetic 2500V. Fully automatic high precision AC DC voltage and current resistance measurement tool, a smart digital multimeter born for mobile phone repair. The MF500 series multimeter is a portable rectifier system with high sensitivity and multiple limits. It can measure AC and DC current, AC and DC voltage, DC resistance and audio level separately. It is suitable for radio, telecommunications and electrician institutions as general measurement. Features: The MF500 multimeter shell is made of phenolic compression molding powder, which has good mechanical strength and electrical insulation performance. The instrument is equipped with a sealing device to reduce the external dust and harmful gas from eroding the inside of the instrument. The dial of the instrument is wide, and the end of the pointer is knife-shaped, so it can clearly indicate the measured value. The battery box is located on the back of the meter and isolated from the inside of the meter, so it is convenient to replace the battery. The volume of the instrument: 178X 173X84 mm; SPECIFICATIONS: DC Voltage: 2.5 / 10/50/250/500 V / 2500 V AC Voltage: 10/50/250/2500 V Current DC: 0.5mA / 1mA / 10mA / 100mA / 500mA Resistance: R2K / R20K / R200K / 2M / 20M Dimensions: 178 * 138 * 84mm Weight: about1450g Power supply: 1.5V C battery 1 + 9V 6F22 battery * 1 & # 65288; without battery 65289; Accessories: test leads, Manual weight: more than 1 kg. CHARACTERISTICS: MF500 multimeter is a high sensitivity, portable, rectifier-based instrument. The instrument has twenty-four ranges, respectively, can measure AC and DC voltage, DC current, resistance, and audio level. basic function: DCV ACV DCA etc. mirror feature scale for accurate reading Classic design magnetic internal board head Bakelite shell overload protection. Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. This watch needs to be equipped with one laminated battery (9V) and one AA battery (1.5V). Since the performance of the battery will fail after the storage period, the product does not come with a battery. If necessary, the cost will be calculated separately.
Laboratory DC Power Supply Adjustable Voltage Regulator Stabilizer Switching Variable Bench Source 30V 10A AC 110V 220V wanptek There are included 5 packages: 1.3010D DC power supply with power display 30V 10A(Three-digit display 0.1 V/0.01 A) 2.3010DF DC power supply with power display 30V10A(Four-digit display 0.01 V/0.001 A) 3.605D DC power supply with power display 60V 5A(Three-digit display 0.1 V/0.01 A) 4.605DF DC power supply with power display 60V 5A(Four-digit display 0.01 V/0.001 A) 5.1203D DC power supply with power display 120V 3A(Three-digit display 0.1 V/0.01 A) Specifications: DC power supply is a single output, high-precision dual display switching DC power supply. The machine has complete operation protection function, high efficiency, low ripple, high stability and small volume. Current limiting protection protects the power supply and load from accidental damage. series power supply has temperature control circuit and low intelligent heat dissipation noise. The series of switching power supplies for measuring instrument have ruled out the inconvenience of bigvolume and heavyweight of a traditional power supply possess. Four adjustment buttons,The output voltage and current respectively is controlled by two variable resistors with coarse and fine regulation for morehandy and precise adjustment. 1.High efficiency and sufficient power 2.Low ripple, small size and light weight 3.Double LED display of voltage and current, high precision 4.Stable voltage, limited current and simple operation 5.Double voltage input, convenient selection 6.Temperature controlled fan for heat dissipation, low noise and long service life 7.Output Voltage ranges from 0 to rating voltage with continuous adjustment . 8.Output current ranges from 0 to rating current with continuous adjustment 9.Short circuit protection function, short circuit stop output,overload protection,over temperature protection. 10.AC 110v and 220vcan work, rest assured to choose. Input voltage: AC 230V / 115V 10%; 50Hz / 60Hz. Output voltage stabilizing value:0-30/0-60V/0-120 continuously adjustable.(Optional) Output constant current value: 0-10A/0-5A/0-3A continuously adjustable.(Optional) Ripple voltage: VPP 1% Overall efficiency: 89%. Digital display: three LED digital tube double display. Display resolution:0.1V/0.01A/0.01V/0.001A.(Optional) Display accuracy: 1% + 2digits. Working temperature: (- 10 45) Storage temperature: (- 20 60) Relative humidity: 90% (40 5 ). Packages: 1x DC power supply 1x power cord (EU,US,UK,AU) 1x Test line (Gift 1x Instructions
