Richmond International Consultancy

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Guar Gum Types Food, Feed & Pharma Grades - Various particle sizes (very coarse to very fine). - • Various hydration rates (very slow to very fast). - • Various viscosities (1% solution in water = 50 cps to 7000 cps). - • Special deodourised grades. - • Special low microbiological count grades. Technical Grades Straight Guars: - Various particle sizes (very coarse to very fine). - Various hydration rates (very slow to very fast). - Various viscosities (1% solution in water = 50 cps to 8000 cps). - Special good Dry-Flow (Free-Flow) Guars. - Special Anti-Dusted Guars. Modified Guars and Guar Derivatives: - Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing), - Borated. - Reticulated. - Oxidised. - Depolymerised. - High water absorbance capacity. - Carboxymethyl (Anionic). - Hydroxypropyl (Nonionic). - Hydroxypropyltrimethyl chloride (Cationic). - Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative). - Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives. - Special Anti-Dusted Modified Guars / Guar Derivatives. Guar gum is a fiber from the seed of the guar plant. Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis). In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent. In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams. How does it work? Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines. There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite. USES: Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days. High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides. Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes. Constipation. Irritable bowel syndrome (IBS).