Vacuum circuit breaker serves in the power system of 10kv and three-phase ac 50hz to function as switching different kinds of loads needing frequent operation, and can protect and control electric equipment in the industrial & mineral enterprise, power plant and substation as well. It can coordinate with the kyn28a-12(gzs1) middle-arranged manual-driven switchgear or xgn- stantionary switchger as well. Main technical parameter: Rated voltage 12kv Rated current 630~3150a Rated short-circuit breaking current 20~40ka Rated peak withstand current 50~100ka Rated short-time withstand current 20~40ka Rated duration short-time 4s Machanical endurance 20000 times Carton package
VN3-12E indoor medium-voltage AC vacuum circuit breaker is a newest product designed by our company which is applicable to 3-phases AC50Hz, 12kV indoor switch systems. The product is with characteristics of smaller volume, reliable insulation, no pollution, long time free maintenance and so on. It is produced with standardized circuit breaker assembly line and has good performance and perfect quality. 1. Equipped with modularized operating mechanism which make the maintenance and the replacing are more convenient. The replace of module do not affect the dynamic capability and also shorten the power-off duration. 2. The interrupter and primary circuit are sealed in the epoxy resin, which makes the circuit breaker is more reliable 3. The pole using convected and ventilated technique and lower resistance vacuum circuit breaker limit the temperature rising because of circuit breaker working for a long time and also reduce the power loss. 4. The operating mechanism is designed uniquely and avoids the moving contact over-rebounding when the circuit breaker is opened and prolong the vacuum interrupter mechanical life. 5. Past the type test according to the national standards such as GB, DL, international standards of IEC, CEI, DIN, VDE and other major industrialized countries.
VN2-24 indoor high voltage AC vacuum circuit breaker is a new designed our which is applicable to air-insulated indoor switch system. The whole structure is assembled with the switch body and operating mechanism. It is produced with standardized circuit breaker assembly line and has good performance and perfect quality. 1. Have a wide range with rated current from 630a to 3150a and rated short-circuit breaking current from 20ka to 31.5ka. The mechanical life can be up to 20000 cycles. 2. Be intended for indoor installation in air-insulated switchgear and have fixed version or withdraw able version. 3. Have perfect switching-capacity which can handle any condition arising from switching of equipments and components under normal operating or fault conditions particularly short-circuit and over-load. 4. Adopt coopers vacuum interrupter which is smaller volume, lower resistance, longer lifetime, better atmosphered technique, more perfect insulation and higher breaking capacity. 5. Be with more perfect external insulation because of the vacuum interrupter and main circuit being cast in epoxy resin poles. 6. Comply with stipulations defined in standards of gb, gl, iec, cei, din, vde and other major industrialized countries.
Vacuum circuit breaker Our products are inexpensive and have super quality. All products have passed the iso9001 international quality certification, some model passed europe certificate for e-mark.. We can provide all sorts of products with advantage in technology, quality and cost.
VED-12 series indoor high voltage vacuum circuit breaker is suitable for 12kV air-insulated indoor switchgear, used as protection and control unit of power equipment of industrial & mining enterprise. Due to the super excellence, it is especially suitable for locations where requires the frequent operation under rated working current or multiple breaking under short circuit breaking current. The circuit breaker adopts the integrated design of operating mechanism and circuit breaker body, servers as not only fixed installation, but also draw-out type equipped with a special propelling mechanism. VED-12 has two main types. One is Draw-out type. Model No. is VED-12D. The other is Fixed type. Model No. is VED-12F. Service conditions 1 Environment temperature:-15°C~+40°C; 2 Environment humidity: Daily average relative humidity:â?¤95%, monthly average relative humidity:â?¤90%; Daily average saturated vapor pressure:â?¤2.2Ã?10-3Mpa,monthly average saturated vapor pressure:â?¤1.8Ã?10-3Mpa; 3 Altitude: Not exceed 1000m; 4 Earthquake intensity: Not exceed°ree; 5 Service location: No water, flammable or explosive matter, chemical corrosive gas or drastic vibration.
1ï¼?General VS1 12KV vacuum circuit breaker VCB HVD1-12(VS1-12) type indoor AC HV vacuum circuit breaker VCB (hereinafter referred to as circuit breaker) are suitable for 12kV air-insulated indoor switchgears, used as protection and control unit of power equipment of industrial& mining enterprise. Due to the super excellence, it is especially for location where requires the frequent operation of rated working current or multi breaking short circuit current. The circuit breaker adopts the integrated design of operating mechanism and circuit breaker body, servers as not only fixed installation, but also the handcart unit through equipping with a special propelling mechanism. 2. Service conditions 3.1 Environment temperature:-15degree~+40degree; 3.2 Environment humidity: Daily average relative humidity:
VIB-24 Indoor High Voltage Vacuum Circuit Breaker is a new generation vacuum circuit breaker for Shaanxi Shaankai-Longxiang Electrical Ltd. It is independently designed and developed by our-selves on the basic of absorbing the merit of same type for the products at home and abroad. The Product conforms to national standard GB1984-2003 , JB3855-1996 , DL/T403-2000 and some stipulation of IEC, the capability reach requirement of M2-E2-C2 grade. VIB-24 Indoor High Voltage Vacuum Circuit Breaker adopt the incorporate design with operating mechanism and reality of VCB, it can be used for fixed installation unit and also can be used for withdrawable by equipped with mainstream Switchgear.
Yangzhou new concept electric co., ltd. Has independently developed 72.5kv intelligent phase selection (synchronous) hv permanent-magnetic vacuum circuit breaker (hereinafter referred to as "intelligent circuit breaker") at world advanced level by integrating domestic and foreign advanced technologies, adopting the new design concept and applying hi-tech means. With permanent-magnetic mechanism, vacuum arc extinction, integrated sensor and arm+dsp processor, this intelligent circuit breaker self-adapts to own parameters and the impact of environment, thus being the first choice for the realization of power grid intelligentization. This product conforms to iec60298, gb3906-2006, gb/t 11022-1999, dl/t 593-2006, gb 1984-2003 standards, etc. major technical parameters are shown below: Rated voltage 72.5kv Rated current 1600/2000/2500a Rated frequency 50hz Rated short-duration (1 min) power frequency withstand voltage 160kv Rated short-circuit breaking current 31.5ka Thermal stability current(4s) 31.5ka Rated lightning impluse withstand voltage(to earth/break) 350kv Dynamic stability current(peak value) 80ka Rated short-circuit current breaking times 20 times Operating time 40-60ms Operating voltage Ac/dc220v Mechanical service life >10000 times Main circuit resistance
VS1-12 type indoor high voltage vacuum circuit breaker is the indoor switch device for three-phase AC 50Hz, rated voltage 12kA power system, can be used for electrical equipment control and protection in power plant, substation and industrial and mining enterprises, and is suitable for frequent operation place, can be installed in the KYN28-12 type and other armored cabinet, can also be installed on the fixed cabinet or gas insulated cabinet. Design feature VS1-12kV indoor medium voltage sealed vacuum circuit breaker (12kV, .4000A, .50kA) VS1 indoor medium voltage sealed vacuum circuit breaker with maintenance free sealed vacuum pole, can equipped with modular spring assembling actuator and permanent magnetic actuator; has the features of reliable performance, long mechanical life, maintenance free, small mechanical movement, has the advantages of simple structure, good process performance, but also can be applied to all kinds of bad working environment. VS1 circuit breaker pole adapts the solid insulation sealing technology, seal the vacuum interrupter and primary main galvanic circle and other parts into strong insulation, high mechanical strength pole with epoxy resin, avoid the influence of adverse operating environment on the primary circuit external insulation, realizes completely maintenance free. VS1 circuit breaker adapt ultra low resistance type vacuum interrupter, meet the VCP circuit breaker requirements on the temperature rise at big current operation situation and reduces the power losses. VS1 circuit breaker adapt optimization and modular spring operating mechanism, simple structure, stable performance, convenient maintenance; modular production process is good, easy standardization production, short delivery cycle.
