Cutting Tools
Name: PCBN Cutting Tool Blanks Application: Ferrous Metal And Alloy Details Introduction�We Has Various Equipments Such As Laser Cutting Machines, Wire Cutting Machines And Various Processing Equipments To Cut Blanks, Regardless Of Their Thickness Into Special Sizes And Shapes Per Customers Requirements. BN Characteristics: Solid CBN, Good Wear Resistance, Two Sides Can Be Used As Edges, High Thermal Resistance, Excellent Fracture Resistance BN Application: High Speed Turning And Milling Of Gray Cast Iron, Turning Of Chilled Iron,Nickel-Based Iron And Ductile Iron PCBN Characteristics: *Good Weld Based In The Composite CBN Layer And Tungsten Carbide Base;High Abrasion Resistance *Good Transversal Repture Strength Resistance; Good Chemic Stability;Uniform Dimension Precision; *Good Consistency Of Processing. PCBN Application: Turning Of Castiron; Powdered Metals; Exotic Materials And Heat Resistant Alloys; High Speed Milling Of Gray Castiron. Please don't hesitate to contact me if you have any needs:miya AT moresuperhard.com Our company also produces a series of diamond and CBN tools, welcome to consult and choose at any time
"PCD blank for Cutting Tools E-Grind supplies the whole range of PCD blanks for cutting tool purpose. The largest Diameter available can be 55mm. Our PCD provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process. PCD application: Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum... nonmetallic materials: ceramics, plastic, rubber, chipboard... PCBN PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability. Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy... E-Grind provides two series of PCBN: 1)Solid CBN 2)CBN with Tungsten Carbide supporting. "
PCD inserts can be used for cutting other non-ferrous metals such as aluminum alloys and non-metals such as fiber-reinforced plastics (GFK and CFK), hard rubber, wood, fiberboard, melamine resin polymer materials and fiber-reinforced metals (MMC). Using cutting tools with diamond coating, you can get faster cutting speed and longer tool life, and the quality and accuracy of the surface of the processed material will be higher. Specification 95%-99% of the components of PCD (polycrystalline diamond) are carbon isotope C12, and its thermal conductivity is 50% better than natural diamond and 2 times faster than copper. Diamond is a hard material, using a special high temperature and high pressure process, a tight layer of polycrystalline diamond can be pasted on the cemented carbide substrate
More SuperHard PCD cutting tool blanks in the size of 5�¼mã??10�¼m and 25�¼m can be used in super-fine processing and fine. They are applicable to the processing of non-metal materials as wood, ceramic,intensified planks and non-farrous material as copper and aluminum. We can supply all kinds of PCD cutting tool blanks that diameter can reach 62mm. PCD Cutting Tool Blanks Application Recommendation * W5 fine grain size(excellent surface finish) Characters: Average grain size: 5�¼m, High diamond content over90%, Laser cutting ,wire EDM cutting Applications:Aluminum, Brass/Copper,Precious metals, Wood composites,Plastic * W10 medium grain size (excellent resistance, good surface finish) Characters:Average grain size: 10�¼m, High diamond content over 90%, Laser cutting ,wire EDM cutting Applications:ï¼?14% Si/Al alloys, Copper alloys, Graphite and graphite composites, Green ceramics and carbides * W25 coarse grain size(Long life, extremely high wear resistance) Characters:Average grain size: 25�¼m, High diamond contentover 90%, Laser cutting ,wire EDM cutting.
PCD cutting tool blanks, PCD blanks Size: 62mm PCD blanks, 58mm PCD blanks, 51mm PCD blanks, 48mm PCD blanks, etc. Type: Triangle, Cylindrical, Square, Flake, etc. Application: PCD blanks are applicable to the processing of non-metal materials as wood, ceramic, intensified planks and non-ferrous material as copper and aluminum. Details More SuperHard PCD cutting tool blanks in the size of 5μmã??10μm and 25μm can be used in super-fine processing and fine. They are applicable to the processing of non-metal materials as wood, ceramic, intensified planks and non-ferrous material as copper and aluminum. We can supply all kinds of PCD cutting tool blanks that diameter can reach 62mm PCD Cutting Tool Blanks Application Recommendation * W5 fine grain size (excellent surface finish) Characters: Average grain size: 5μm, High diamond content over90%, Laser cutting, wire EDM cutting Applications: Aluminum, Brass/Copper, Precious metals, Wood composites, Plastic * W10 medium grain size (excellent resistance, good surface finish) Characters: Average grain size: 10μm, High diamond content over 90%, Laser cutting, wire EDM cutting Applications:ï¼?14% Si/Al alloys, Copper alloys, Graphite and graphite composites, Green ceramics and carbides * W25 coarse grain size (Long life, extremely high wear resistance) Characters: Average grain size: 25μm, High diamond content over 90%, Laser cutting, wire EDM cutting Applications:14% Si/Al alloys, metal matrix composites, Bi-metals(aluminum/ castiron), sintered ceramics and carbides
Name: PCD Cutting Tool Blanks Brief IntroductionMore SuperHard PCD Cutting Tool Blanks In The Size Of 5μm�10μm And 25μm Can Be Used In Super-Fine Processing And Fine. Type: Triangle, Cylindrical, Square, Flake, Etc Details More SuperHard PCD Cutting Tool Blanks In The Size Of 5μm�10μm And 25μm Can Be Used In Super-Fine Processing And Fine. They Are Applicable To The Processing Of Non-Metal Materials As Wood, Ceramics,Intensified Planks And Non-Farrous Material As Copper And Aluminum. We Can Supply All Kinds Of PCD Cutting Tool Blanks That Diameter Can Reach 58mm . Model Product No Ang Diameter (Mm) Thickness (Mm) MoreD30 360 30 1.6, 2.0, 3.2 MoreD42 360 42 1.6, 2.0, 3.2 MoreD48 360 48 1.6, 2.0, 3.2 MoreD51 360 51 1.6, 2.0, 3.2 MoreD58 360 58 1.6, 2.0, 3.2 Note:The Products Can Be Manufactured Per Customer Request As Non-Standard Shapes Such As Rectangular, Square, Triangle, Rhombus, Sector And So On. Advantages: 1. High hardness, abrasion resistance and impact resistance 2. High speed, good surface finish, long life and high efficiency 3. Cutter layout is force balanced to drill a precise round hole and reduce bit whirl 4. Gauge pads have tungsten carbide inserts for maximum wear resistance 5. The diamond layer with thickness over 1 mm increases abrasion resistance of PDC cutter Please don't hesitate to contact me if you have any needs:miya AT moresuperhard.com Our company also produces a series of diamond and CBN tools, welcome to consult and choose at any time
Supplier: Drill, endmill, reamer, burnishing drill, pcd & pcbn insert, bite and total cutting tools
"We supply various types of PCD & PCBN Inserts for AUTO Engine Machining Industry, Aerospace Industry, Moto-cycle Industry etc. With ISO 9001:2000 Certified and more than 60 advanced machines from EWAG, Wendt, DMG, Coborn..., our products are consistent in quality. Compared with ordinary solid brazed cutting tools, they have the following advantages: Convenient to fasten or remove, the position with high speed and accuracy, save exchanging time. High wear resistance extends the life of cutting tools. Perform high speed, high efficiency, and high precision processing. Easy and safe to manage and deliver."
