BTA Deep Hole Drilling Tools
Deep hole drilling machine 5/7 arms. -
Fixed Diameter Hole Opener is used for enlarging the surface hole which drilled by cone bit in advance, or connected above the cone bit. It applies to Onshore and Offshore oilfield. Cutter type: SM: Soft to medium formation MH: Medium to hard formation XH: Hard formation.
High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires little pressure.
Machine Series Features • Drill depth of 1-20M • Rack and pinion drive • Precision ground hardened guideways • Cast iron bed • Geared headstocks for high torque applications • Modern, efficient design. Machine Configurations • Rotating workpiece, stationary tool • Rotating tool, counter-rotation workpiece • Rotating tool, stationary workpiece. Process • BTA/STS solid drilling • BTA/STS counter boring • Trepanning • Skiving and roller burnishing. Machine Accessories • Precision pressure heads • Vibration dampener carriages • Workholding chucks • Workpiece roller steady • Hinged belt chip conveyor • Coolant chiller or heat exchanger. Tooling Accessories • Drill tubes • Drill tube clamps • Drill bushing systems • Tube seal packing glands • Vibration dampener cartridges. Advanced Options • Fanuc or Siemens CNC • Lantern chuck for pull bore tooling • X-axis actuator for bottle boring. Customer Service • Factory training for machine & tooling • Foundation design & process planning • Installation and startup • Technical support via phone and internet machine connection. Techincal information of ts2180 cnc deep hole boring machine Drilling dia range : ö60-ö130mm Boring dia range : ö80-ö800mm Boring depth range : 1-16m depending on client requirement Trepanning hole dia : ö140- ö400mm Spindle center height : 1000mm Headstock spindle dia : ö100mm Front spindle taper hole : ö120mm, 1:20 Spindle speed range , steps : 1--200r/min three shift Mian motor : 55kw dc motor Feeding speed range : 5--500mm/min stepless speed adusting Dia range of workpiece : ö270--ö1000mm Spindle hole of drilling pole box : ö120mm Front taper hole of drilling pole box spindle : ö140mm, 1:20. Drilling bar box motor : 45kw Drilling pole box speed range and steps : 16--270r/min 12 steps Feeding motor : 7.5kw Cooling motor : 11kwx4 Hydraulic motor : 1.5kw, n=1440r/min Rated pressure of cooling system : 2.5mpa Cooling system rate : 200, 400, 600, 800l/min Machine bearing : 25t--35t. Wooden packing.
On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency. Technical information of TS2110 deep hole boring machine boring Dia range: 20-100mm Drilling Dia range :20-40mm Max boring depth : 0.6,1m,1.5m,2m,2.5m,3m Headstock spindle hole Dia:100mm spindle rotation speed ,steps: 2-90r/min feeding speed 10-300mm/min AC servo stepless carriage rapid moving speed:2m/min clamping Dia of workpiece: 30-200mm rated pressure of cooling system:2.5Mpa volume of cooling system: 100,200,300l/min main motor: N=11kW feeding motor:3kw AC servo coolant pump motor:5.5KW x5(3groups) rated pressure of hydraulic system : 6.3MPa. Wooden packing.
CNC Deephole Drilling & Boring Machine is suitable for the drilling, boring and rolling processing of all kinds hydraulic oil cylinder, cylinder and other precision tube fittings, especially for the precision processing of step holes. The hole diameter accuracy of machined workpiece can be up to and over IT7~IT8, and the surface roughness reach Ra0.2~0.3 m. The bed adopts welding steel so that it is strong in rigidity. On the double flat guide way, it equipped the rolling linear guide way. So it has high move precision and high abrasion proof. The bed is also the cooling box, so it is strengthen the stability of bed and reduce the shake. It equipped the Germany SIEMENS 802D CNC system (or appoint by customer). It is AC motor for the headstock, tow grade and stepless. The bearing of spindle is high precision FAG bearing and it is strong in rigidity and high precision in rotating. The feeding box adopts AC servo motor, stepless, and it is equipped with high precision ball screw. It adopts the hydraulic elements which is stable in capability made in Taiwan (or appointed by customer). It adopt scraps discharging by spindle, it equipped automatic discharge scrap equipment and it is not leak. It can also equipped high efficiency automatic expand-draw back combined tools. It is an ideal machine for deephole processing with high precision and efficiency. Tsq 2180 CNC deep hole boring machine Range of drilling hole dia : 40- 100mm Range of boring hole dia : 40- 800mm Sleelve boring hole dia : 140- 400mm Max boring depth : 3-12m one sepcification every each one meter Center height from horizental rail to spindle center : 1000mm Headstock spindle hole dia : 100mm Front spindle taper hole : 120mm, 1:20 Spindle rotation speed , steps : 16-270r/min 12steps Main motor : 45kw Feeding speed : 5-500mm/min ac servo stepless Carriage rapid moving speed : 2m/min Clamping dia of workpiece : 120-800mm Drilling bar box spindle hole dia : 75mm Front spindle taper hole of drilling bar box : 85mm, 1:20. Drilling bar box motor : 30kw Spindle rotation speed , steps of drilling bar box : 82-490r/min 6steps Feeding motor : 7.5kw ac servo stepless Pulling plate fast motor : 5.5kw Cooling pump motor : 5.5kwx4 4groups Hydraulic pump motor : 1.5kw, n=1440r/min Rated pressure of cooling system : 2.5mpa Volume of cooling system : 100, 200, 300, 600, 900l/min. Wooden packing.
Supplier: Used deep hole drilling machine
Detailed product description Well drilling Compact in structure Beautiful in appearance Highly mechanized Easy to transport. Well drillingmain technical parameter Model s400 Max drilling diameter(mm) 650 Drilling depth(m) 400 Speed oftotarydisk(rpm) (r/min) 22 59 86 126 Moment of torque of rotary disk( kn.M) 13.7 5.1 3.5 2.3 Product description: 1, s400 hydrology water well drilling rig is a product having honourably awarded the national scientific research achievement prize . 2, it is so designed that the drilling of the drill rod is actuated by a rotary disk.The drill is suitabe for the exploration of water sources to 3, it is also adapted to farm irrigation and drainage.Engineering geological drilling and exploration.Etc.This drill is wholly mounted.Possesses an integral drill tower and a partly hydraulic operated.It has a large bore diameter of totary disk.A deerer drilling depth and a large moment of torque. 4, the drill is compact in structure and beautiful in appearance.It is highly mechanized and easy to transport.
