Material: high carbon spring steel, spring steel, stainless steel, alloy steel Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm Torsion spring wire diameter :0.2-35mm Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution. Extension spring hook include Germany hook, British hook, Side hook We can customize special design of springs based on your requirement.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Dep=di-2
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
We offer Gilsonite in lumps or powder form. We offer it in different grades. We can supply it in different packaging as per customer requirement.
Product Name Citric acid monohydrate Product Charactersï White Crystalline Powders, Colorless Crystals or Granules Executive Standards BP/USP/FCC/E330/GB1886.235-2016 Packaging plastic woven bag, 25kg net composite paper-plastic bags or 3-ply kraft paper bags with PE liner, 500kg or 1000kg net PP woven Jumbo bags Storage Kept in a light-proof, well-closed, dry and cool place Main Usage Citric Acid is mainly used as acidulant, flavoring agent, preservative and antistaling agent in food and beverage industry.it is also used as antioxidant, plasticizer and detergent in chemical, cosmetics and cleaning industries.
Commodity: Dicalcium phosphate Feed Grade Use DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix. Product Nature Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization. Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder. Specifications Appearance white and gray powder/granule Total P 18% min Calcium 21% min F 0.18% max As 30 ppm max Pb 30 ppm max Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Commodity: Calcium carbide Molecular formula:CaC2 Molecule Weight: 64.10 H.S code:28491000 CAS: 75-20-7 UN NO.1402 HAZARD CLASS: 4.3 Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide. Appearance: Grey, black solid, purple when its purity is more than 90%. Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm Package: Net in 100kg or 50kg new iron drums with nitrogen. Specification: GB10665-2004 Specification Superfine Grade First Grade Second Grade Gas yield(L/kg)L/kg 305 295-305 285-295 PH3 content in acetylene (PH3%) 0.06 0.08 0.08 H2S content in acetylene (H2S%) 0.1 0.1 0.1 Loading weight in 1 x 20fcl:22.5mt
Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 21% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity. Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. coarse particles MDCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product produced by micro-particles MDCP form, without any chemical binder. Specifications Appearance white powder or granule Phosphate  21% min Calcium     15% min Fluorine    0.18% max Arsenic    30ppm max Pb   30ppm max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
