Technocool

Supplier: We are Indonesia wooden products manufacturer & supplier * wood species : red meranti balau pine rubberwood acacia albasia falcata * products items : e2e or s4s molding finished panels *** anti slip redeed decking or flooring *** film faced plywood & mdf board *** bbq wood charcoal of halaban tamarind mix hardwood *** please contact us for further details wooden pallet s4s or e2e molding finished wooden products wood charcoal of rosewood tamarind halaban and others coconut shell charcoal briquitee shisa palm kennel charcoal bangkirai / yellow balau s4s or redeed decking s4s or e2e wooden panels solid wooden doors bbq hardwood charcoal
Services: Export & import, manufacturing specific orders , agent for some products

Polyurethane foam sandwich panel is fit for the projects which have serious require of keeping warm. Polyurethane core material is considered to the best material in keeping warm and thermal insulation. The Polyurethane block material become steady after it froth, then combining with metal plates. The characteristics of this technique are: The polyurethane froth, after this chemical reaction is stable, we cut the polyurethane into pieces which with different thickness. The polyurethane sheet material has stable physical performance, it can combine with prepainted gaivanized steel sheets, the surface is smooth and the whole performance is excellent. The characteristics of polyurethane foam sandwich panel: Polyurethane foam sandwich panel(the abbreviation of Polyurethane is PU sandwich panel)have characteristics of high load intensity, small water-absorptivity, and the stability in either low temperature or the high temperature is good, the service life is long, thermal insulation performance is outstanding and so on. Good supporting, heat resistant, sound-insulated, sound absorption, light quality, non-toxic, odorless, green environmental protection. Polyurethane foam sandwich panel can cementation with the steel plates, the cements, the fiberboards, the bricks and many kinds of materials very strongly, in usual situation, it would not fall off and still strengthen its thermal insulation and waterproofing effects. The unique produce foaming craft made the products have exquisite and even abscesses, the Thermal conductivity is low, the size stability is good, is very suitable for both of the low pressure and the high pressure construction. Polyurethane foam plastic, s thermal stability is quite good, when the temperature is lower than 120 C, the volume and the intensity have no obvious change, its Thermal conductivity is small, when the density is 0.03kg/m3, the heat conductivity is only 63J(m. H. K)(15cal/m. H. K). It can be widely used as structural materials and heatproof materials in petroleum industry, chemical industry, construction, packing, refrigeration, military industry, space industry, aviation, transportation and industrial model design and other various aspects. w;1150mm,L:

Metal panel insulated with rock wool for roofs and walls which require a high degree of resistance to fire. The HKF-RW panel is constituted by two sheets with inter posed layer of orientated fibre high density rock wool, arranged perpendiculary to the plane of the panel and positioned in strips, laid longitudinally with offset joints and transversally compacted, completely filling the space between the two supports. Resistance to fire Rook wool is non-combustible material, so the rock wool panel has good fire-resisting property. The test shows temperature of the panel fire-proof is as high as 1000C, the test results obtained by Istituto Giordano S. P. A is as follow: Roof and Wall panel thickness 100 REI 120 Roof and Wall panel thickness 80 REI 60 Roof and Wall panel thickness 50 REI 30 The roof and wall panels, thickness 50-80-100mm, were classified 0/1 for reaction to fire. (Materials are assigned a class from 0 to 5, the higher the class, the higher degree of combustion. ) Effective Characteristic of Sound Resistant. Rock wool panel achieves a notable reduction in air borne sound transfer, particularly when specifying a perforated liner. The impact of rai and hail on the metal sheet, a problem on most standard constructions, is greatly reduced when adopting HKF-RW panel in thicknesses of 50-100mm with 100kg/m3 rock wool fibre insulation has achieved results of RW=29-30 dB according to UNI 8270/7 and 717/82. w;1150mm,L:

Exterior House Wall Panels by BV7S-001 Wood Pattern Sandwich Panel is often using on mobile house, villa house, holiday house. Structure 3 layers: Surface: 0.3 mm Al-zn alloy coated steel sheet (Al 55%, Zn 43%) Middle: 16mm PU foam Back : Aluminium foil paper Size: Length (3000mm-6000mm) Width:380mm Thickness: 16mm Weight: 3.7kgs/sqm Application Sandwich panel is widely used for Exterior wall cladding and Interior wall Insulation and Decoration in the filed of PEB house, Villa, Steel Structure buildings, Hospital, Old Building renovation, School, Library, Supermarket, Plant, Train Station, Residence and so on!

Our acacia panel is made from a long-lasting natural acacia tree, so it has beautiful and sophisticated grain, perfect for interior design. Adding elegance to any space they appear. High-grade acacia panel will be subjected to a drying process, modern processing techniques, so it is extremely resistant to termites and insects. Thickness: 18/20/22mm -0/+0.3mm. Width: 1220mm -0/+10mm or as required. Length: 2440mm -0/+20mm or as required. Joint type: 12mm - finger joint (vertical joint - on face). Sanding: both side at 180 or 240 grid as required. Stage width: 40 - 90mm Stage length: 160 - 400mm Moisture: 10% (+/- 2) Packing: Kraft paper wrapped with pallet below or as required. Payment term: TT, LC at sight

Our rubber wood panel is made from a long-lasting natural rubber tree, so it has beautiful and sophisticated grain, perfect for interior design. Adding elegance to any space they appear. High-grade rubber wood panel will be subjected to a drying process, modern processing techniques, so it is extremely resistant to termites and insects. Thickness: 18/20/22mm 0.3mm. Width: 1220mm 10mm or as required. Length: 2440mm 20mm or as required. Joint type: 12mm finger joint (vertical joint - on face). Sanding: both side at 180/240 grid. Stage width: 40 - 90mm Stage length: 160 - 400mm Moisture: 10% (+/- 2) Packing: Kraft paper wrapped with pallet below or as required. Payment term: TT, LC at sight

Acacia Finger Joint Panels for making table tops in the kitchen, restaurants, bars, furniture and cabinets,The surface is smooth with rustic natural appearance, suitable for any space. Besides, it can be coated with various options of colors to improve the aesthetics of the loook such as honey, espresso, spice,... Acacia Finger Joint Panels are made from solid hardwood which makes the products durable, strong and easy to work. Specifications: - Thickness: 15,18,20,25,38 or customize - Dimensions: 1220 x 2440 mm or customize - Humidity: 10% (+-2) - International standard glue: KR560 - D4 - Tolerance: (+-)0.2mm thickness, +2mm width; +5mm length