Applications of electric tooling carrier: The electric tool carrier is specially used for customers in the tooling industries to transport various tools. Technical parameters of electric tooling carrier: 1. Loading capacity: 6000kg 2. Load center: 600mm 3. Lifting height: 1520mm 4. Lifting speed: 10mm/s 5. Driving speed (full load/unload): 4.5/5.6km/h 6. Min. Turning radius: 1730mm
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Hand tools are simple tools which you use with your hands , and which are usually not powered also Hand tools is any tool that is powered by hand rather than a motor examples are chopping, chiseling, , cutters, files, striking tools, struck or hammered tools, screwdrivers, vises, clamps, snips, saws, and drills.
WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
TopTech JCHWD350 Import European main parts, TopTech power sources have the world first class welding quality, which can be the same performance as the world big brands'. TopTech JCHWD350 Main Technical Parameters of TopTech JCHWD350 Machine type TopTech JCHWD350 Input voltage 380V/415V, 3 phase, 50/60Hz Input current 22A Output current / Voltage adjustable range 25A/15V to 350A/31.5V Output voltage adjustable range 14-40V Continually duty cycle (40â??) 60% 350A/31.5V Continually duty cycle (40â??) 100% 270A/27.5V Welder weight 106Kg Welder size 1100*430*1000mm Welding bar diameter 0.8mm, 1.0mm, 1.2mm, 1.6mm Gas flow 10-20L/min Machine size 630*300*400mm Company Introduction Beijing TopTech Technology Co., Ltd. was founded in Beijing, the capital and main transportation city in China. With more than 10 years experience in welding and cutting industry, we had R&D our advanced welding and cutting equipment. Mature teams, included sales team, marketing team, production team and after-service team, supply professional service for customers. Strictly follow ISO 9001:2000 world quality management system. Beijing TopTech Technology Co., Ltd. products include plasma cutting machine, laser cutting machine, CNC cutting machine, flame cutting machine, portable cutting machine, gantry cutting machine, laser carving machine, high definition plasma cutting machine, bevel cutting machine, plasma cutter. Contact TopTech W:www.toptechone.com E: info@toptechone.com sales@toptechone.com bill@toptechone.com A: No. 69 Yangzhuang Street, Shijingshan District, 100043, Beijing, China T: +86-10-6865 3022
Technical data of Electric tools Automatic balancing correction machine Five-stationAdvantage:1.With Automatic convey line,, machine can be connect to another machine.Balance and correction can be finished at a time,one person operate on multi-machines. 2.Optimized test systems, high precision, dynamic and static balance consistency. Once reduction rate is higher. 3.Easy to replace product,Only need to replace products fixture and adjust sensor position 4.Man-Machine interface,It has memory function for production capacity and real-time production information 5.Rigidity structure design,with a longer use life6.Simple, easy to use and maintain.1.Technical data:ItemsDetailsTypeFive-station( twin cutter/with automatic assembly line)Main components configurationCylinder:SMC,New-EraServo motor:MitsubishiSensor:KEYENCE,BaumerHMI:KEYENCEControl PLC: KEYENCE KV-3000Stepping motor: Oriental MotorArmature DiameterArmature below 1.6KGStack lamination:20-70mmArmature diameter:Φ25-55mmBalancing speed1500-2200rpmMilling methodR-shapePowerAC380VAir supply0.4~0.6MpaCycle time8~12SResidual unbalanceeccentricityBetter than the national standard Grade 6.3Volume(length x width x height)2000 x 1700 x 1800 mm2.Major components list: SpecificationsRemarkBrandPneumatic ComponentMH rotation cylinderCRA1BS63-180CMH rotation componentSMCMH cylinderHP06-18-S-T8370CNew-EraMH cylinder Way valveVP4SMCLCD touch panel10.4"KEYENCEMH up/down cylinderMDB63X70-SSMCPress cylinderCDQ2-80X120Hold armatureSMCMotorMain MotorM2QA 80MDrive Head-stockABBServo motorThe vertical/horizontal feed motorMitsubishiServo motor The vertical/horizontal feed motor Step motorDrive rotation clawOriental MotorStep motor The horizontal feed motorMitsubishiSensorLaser sensorE3Z-T81ATesting/FixtureOMRONLaser sensorPZ-GWorkbenchKEYENCEProximity switchDetectorBaumerVibration sensor9004Eddy current sensorZhong hangMain Mechanical ComponentGuide railMSB20S2FCR380-10HorizontalTHKGuide railMSB20S2FCR290-25VerticalTHKGuide railR20-5T4-FST-475-475HorizontalHIWINGuide railR20-5T4-FST-395-475VerticalHIWINCutterYong HuaControl UnitPLCKEYENCEControl PLCKEYENCEServo DriverSH-20504 Oriental Motor3.Ambient parametersThe equipment can be used continually and normally in 72 hours under below condition.1.Ambient temperature: 5 45 2.Humidity:83 95%RH +40 ,68 74%RH -15 4.Peripheral partsa)Operation manual and disk.b)Tool boxc)Toolsd)Spare partsApplication Start motor Automotive seat motor
The Introduction of Electric tools Automatic balancing correction machine? typeParameterItemsDetailsTypeFive-station(twin cutter/with automatic assembly line) MaincomponentsconfigurationCylinder:SMCServo motor:YASKAWA Sensor:KEYENCE,OMRON,CONTRINEXLCD touch screen:KEYENCEControl PLC:KEYENCE KV-3000Stepping motor:Oriental MotorArmature DiameterStack height:15-30mmArmature diameter: Φ17~35Balancing speed1500-2200rpmMilling methodT-shapePowerAC380VAir supply0.4~0.6MpaInitial unbalance Cycle time(type ?¡)6~8SResidual unbalanceeccentricityBetter than the national standard for Grade 6.3Volume(length x width x height) 2000 x 1700 x 1800 mmI.Test PartProfessional long life industrial vibration sensor. High precision, quick active time,.II.CorrectionWe have the patent with fully independent intellectual property right, process in high efficiency. Balance grade better than G6.3 III.Features and advantage 1.The critical components include Keyence PLC and SMC cylinder, servo motor and Oriental motor. THK??s slide rail and screw mandrel stable and reliable; 2.The control software is developed independently by ourselves that can be upgraded according to the customer??s requirements. We also focus on the innovation to ensure our balance machine can be satisfying the customer requirements in future. 3.To different armature, it??s easy to change cutter and fixtures, all proceed can be finished in 30-40 minutes. 4.The equipment with auto-transportation line. One operator can control 2-3 units equipment. It can be directly connected to automatic production line in order to start full automatic processing 5. Easy for workers to learn and set up. 6. Easy for maintain and low in cost. IV. Cycle time of Five-station I type Automatic Balancing MachineProcessing cycle time:6~8 seconds (include testing, milling)Suit for DC motor, the diameter apply form 17mm to 35mm.Application :Home Appliances: Hair Dryer Motor, Electric Shaver Motor, Electric Toothbrush Motor, Hair Clipper Motor, Electronic Lock Motor, Electric Drill Tool Motor, Power Tool Motor The picture of applications
The Introduction of Electric tools Automatic balancing correction machine P typeItemsDetailsTypeFive-station(twin cutter/with automatic assembly line) MaincomponentsconfigurationCylinder:SMCServo motor: MitsubishiSensor:KEYENCE,OMRON,CONTRINEXLCD touch screen:KEYENCEControl PLC:KEYENCE KV-3000Stepping motor:Oriental MotorArmature DiameterStack height:12-30mmArmature diameter:Φ15~40Balancing speed1500-2100rpmMilling methodPieces cutterPowerAC380VAir supply0.4~0.6MpaInitial unbalance Cycle time(type ?¡)10-12s(primary survey, process on both side, repetition inspecting)Residual unbalanceeccentricityBetter than the national standard for Grade 6.3Volume(length x width x height)2000 x 1700 x 1800 mmI.Test PartProfessional long life industrial vibration sensor. High precision, quick active time,. II.CorrectionWe have the patent with fully independent intellectual property right, process in high efficiency. Balance grade better than G6.3 III.Features and advantage1.The critical components include Keyence PLC and SMC cylinder, servo motor and Oriental motor. THK??s slide rail and guide screw stable and reliable;2.The control software is developed independently by ourselves that can be upgraded according to the customer??s requirements. We also focus on the innovation to ensure our balance machine can be satisfying the customer requirements in future.3.To different armature, it??s easy to change cutter and fixtures, all proceed can be finished in 30-40 minutes. 4.The equipment with auto-transportation line. One operator can control 2-3 units equipment. It can be directly connected to automatic production line in order to start full automatic processing 5.Easy for workers to learn and set up. 6.Easy for maintain and low in cost. IV.Cycle time of Five-station I type Automatic Balancing MachineProcessing cycle time:10-12 seconds (include testing, milling)About 300-350 armatures per hour.Suit for DC motor, the diameter apply form 15mm to 40mm. Application: