Lesso

Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings. According to the application: 1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc. 2. changing the direction of the pipe: bends, bends. 3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe. 4. pipe fittings with additional piping branches: three links, four links. 5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug. 6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc. According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings. Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver, JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages SUPMIROR offer more solutions for building faÃ?§ade and interior decoration. SUPMIROR without paint content, more environment friendly SUPMIROR is easy for processing with tempering, laminating, curving and acid etching. JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside, to transform and decorate rooms, to increase the feeling of space.   Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design, with various colour choice, easy to clean, bring more space in modern life. Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side, can be used on door

JH temperable mirror (SUPMIROR) is made with sputtering technique on starphire premium glass, not as mirror based on silver ,JH SUPMIROR can be toughened and exposed in damp environment, like float glass . JH temperable mirror Advantages �?�??�?�?�?�¬SUPMIROR offer more solutions for building facade and interior decoration . �?�??�?�?�?�¬SUPMIROR without paint content, more environment friendly �?�??�?�?�?�¬SUPMIROR is easy for processing with tempering ,laminating ,curving and acid etching . JH temperable mirror Application SUPMIROR is suitable for many range of applications, including building inside and outside , to transform and decorate rooms, to increase the feeling of space. Splashback SUPMIROR splashback is the perfect choice to any kitchen, bathroom and laundry design , with various colour choice ,easy to clean, bring more space in modern life . Interior partitions and doors After toughened or laminated, SUPMIROR is compatible with modern fixing systems Baths, showers partitions ,doors SUPMIROR is almost immune to oxidation, suitable for fitting areas subject to high levels of moisture One-way mirrors SUPMIROR includes one-way mirror products, apprears reflectctive on one side and transparents at the others. When fitted in a low-light room, allows you to observe the interior of a room more clearly without being seen. From the lighter side of the room, the wall looks just like mirror. Double sides mirror SUPMIROR includes double side mirror products, which is high reflection on both side,can be used on interior decoration.

Product name:Precision steel pipe Welding Line Type:Spiral Welded Keyword:Steel Pipe MOQ:5 Tons Shape:Round Pipe Tube Sample:Provide Surface Finish:TSHS Delivery Time:within 7 days Usage:Construction Structure Finish:Polish Gold Satin Black Application:Fluid Pipe Alloy Or Not:Is Alloy Section Shape:Round Special Pipe:Thick Wall Pipe Standard:ASTM Certificate:ISO9001 Surface Treatment:Hot Rolled Tolerance : 1% Processing Service:Welding Processing Service:Punching Processing Service:Cutting Processing Service:Bending Processing Service:Decoiling Oiled or Non-oiled:Non-oiled Delivery Time:15-21 days Place of Origin:CN;SHN Outer Diameter:10 - 600 mm Thickness:2 - 80 mm Grade:10#, 20#, 45#, 16mn, A53(A,B), A106(B,C), A333

Product Name Precision Steel Pipe Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519 Material SAE1010,SAE1020,#10,#20,#45,304,316 Outer diameter 8MM-50MM Wall thickness 0.5-50.0MM Length fixed(3-12m) or customized Technology High precision Cold drawn/ Cold rolled Heat treatment BK/BKS/NBK Advantages Short delivery time Quality assurance Competitive price

Product Name Precision Steel Pipe Standard DIN2391 EN10305-1 ASTMA179 ASTM A192 ASTM A519 Material SAE1010,SAE1020,#10,#20,#45,304,316 Outer diameter 8MM-50MM Wall thickness 0.5-50.0MM Length fixed(3-12m) or customized Technology High precision Cold drawn/ Cold rolled Heat treatment BK/BKS/NBK Advantages Short delivery time Quality assurance Competitive price

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder

High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder