1.Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate.
2..Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc.
3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users.
4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface.
5. the chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
Particularly recommended
1. 53*59 drilling rod adopted,high rigidity and strong delivery torque.
2. The machine is equipped with national patent technology: taper clutch,with characteristics of strong transmission torque,easy operation and free maintenance.
3. For the winch,we use large module planetary gear and add supporting frame,greatly increasing hoisting and braking ability of the winch.
4.Vertical spindle are fixed by four groups of bearings to ensure that the rotary machine is rigid enough for gravel layer and other complex geological conditions.
5. We are the first one to equip mud pump with the flow 160L/Min in china so that it will save cost and also make the machine compact,mobile and lightweight.
The application of drilling rig machine:
ST-100 drilling rig is mainly used for geological general investigation and exploration,road and tall buliding foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and direct grouting,civil wells and earth temperature central air-conditioner,etc.
1.Brief introductions of KHYD125 electric rock drilling rig
·electric rock drilling rig can be fitted with drilling rigs, and can be drilled horizontally or inclined upward or upward.
·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining.
·In drilling operations, we only need to operate the hand wheel, and we can advance and return quickly.
2.Specifications of KHYD125 electric rock drilling rig
Model Unit KHYD125
Rated output power of electric motor kw 7.5
Rated voltage of electric motor v 380/660
Rated frequency of electric motor hz 50
Rated current of electric motor a 15.4
Motor rotating speed r/min 1440
Motor phase number three phase communication
Rated working mode continuity
Drilling speed mm/min 280
1.Brief introductions of KQZ-100 pneumatic DTH drilling rig
KQZ-100 pneumatic DTH drilling rig is a new type of high efficient rock drilling equipment designed for water conservancy projects and building materials sites. It is widely used for drilling in all kinds of rock stratum and drill hole. For example, water conservancy and construction slope treatment .
KQZ-100 pneumatic DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from the general drilling machine. Its gas distribution and piston reciprocating mechanism are independent with each other. The front end is directly connected to the bit, and the back end is connected to the drill pipe. When driving the hole, the impactor will rotate in the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom.
2. Features of KQZ-100 pneumatic DTH drilling rig
Small volume, light weight, suitable for large and medium-sized drilling rig can not workplace, convenient and flexible.
3. Specifications of KQZ-100 pneumatic DTH drilling rig
KQZ-100
Borehole diameter mm 65-150
Borehole depth m 20-25
Rotating speed of drilling tools r/min 68-85
Air consumption m³/min 10-13
Cylinder diameter mm 150
Drilling pipe mm 50/ 60
Motor power kw 4.4
Main engine length mm 2400
Main engine weight kg 190
TAIYE370-DTH hydraulic anchorage drilling rig is equipped with new powerful hydraulic powered rotary head and propulsion syste.
Driing Hole: 90-254mm
Driling Depth: 90m
It is mainly used for the construction of open pit mining, water Conservancy, power station, transportation and other infrastructure, construction foundation excavation and other projects to drill blasting holes, anchoring holes, geothermal air conditioning holes, grouting holes and so on. In the geological conditions such as fracture and weathering rock formation, the machine can use casing and tube drilling.
TAIYE370-DTH hydraulic anchorage drilling rig is equipped with new powerful hydraulic powered rotary head and propulsion syste.
Driing Hole: 90-254mm
Driling Depth: 90m
It is mainly used for the construction of open pit mining, water Conservancy, power station, transportation and other infrastructure, construction foundation excavation and other projects to drill blasting holes, anchoring holes, geothermal air conditioning holes, grouting holes and so on. In the geological conditions such as fracture and weathering rock formation, the machine can use casing and tube drilling.
The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp