Product Name: Air heater Item No: E-serie Rated Voltage: 12V/24V Rated Power: 4500W/4000W/3000W/2000W Type of Moter: Brushed Life Time of Motor: 2000h Weight:Â 5.75Â KGS Dimension: 372*141*150(175)mm
1) mini air heater, 2~7.5KW heating power, maximum airflow 5.5m3/min, temperature range 0~350, can set through temperature control panel, airflow can adjustable. 2) industrial electric heater, 5~30KW heating power, maximum airflow 18m3/min or 36m3/min, temperature range 0~350â??, can set through temperature control panel, airflow can adjustable. 3) industrial electric heater, 30~80KW heating power, maximum airflow 49m3/min or 80m3/min or 116m3/min or 166m3/min, temperature range 0~350â??, can set through temperature control panel, airflow can adjustable. 4) hot air blower with high pressure, 5~60KW heating power, maximum airflow 80m3/h~2500m3/h, temperature range 0~350, can set through temperature control panel, airflow can adjustable.
Product Description 1,Application: Warmer, disinfection cabinet, bathroom heater 2,Characteristics self-regulation PTC elements, automatic temperature control Less power aging rate Power and voltage can be designed as client request . Power range is from 0.5-5kw and voltage range is from 110 to 265 VAC Various fixing holder and wire connection for easy assembly and usage
Used in different fields like transportation vehicles, recreational vehicles, engineering machinery,crane,and ship.Preheating, defrosting window glass and heating and insulation of moving cab and cabin. Preheating, defrosting window glass and heating and insulation of moving cab and cabin. It doesn't depend on the engine or the heat storage of the vehicle.It can be installed in the cab or under the truck and aisle.
Product Name: Air heater Item No: W-serie Rated Voltage: 12V/24V Rated Power: 5500W/4000W Type of Moter: Brushless Life Time of Motor: 20000h Weight:Â 5.75Â KGS Dimension: 425*148*162(200)mm
Air duct heater is mainly used to heat up the air in the airduct, can be classified into three types by high temperature, medium temperature, low temperature.The common ground on the structure is adopting steel plate to support the heating tube, in the purpose of decrease the shake of the heating tube when the fan stops.Overtemperature controller is installed in the junction box.The low temperature type air duct heater can be directly installed on the airduct, due to the differences from the structure, the medium temperature type and high temperature type electric air heater has a 100mm thick thermal insulation material layer between the duct exine and the junction box clamp, not only to decrease the whole duct external heat dissipation, but also bring down the temperature in the junction box. Characteristics 1.Heating tube adopts outer coiled ripple-type ss belt, which enlarges the heat dissipation area, thus, it greatly improves the heat exchange efficiency. ¡¡¡¡2.Professional design, low wind resistance, uniform heating, no high temperature or low temperature blind angle. ¡¡¡¡3.Duplex protection, good safety performance.Temperature controller and fuse protector are installed, which can be used for controlling the heater operates normally under the condition of overtemperature and without wind, thus, to guarantee not a single miss in a ten thousand times. As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
The main equipment of LF-QN-5KW air parking heater (hereinafter referred to as the heater) is a small fuel furnace controlled by a single-chip micro- processor. Its furnace body (the heat exchanger) is located in the hood-shape case, which serves as independent air passage. Cold air is sucked into the air passage by the heat supplying fan and blown out when it becomes hot, so as to form another heating system that is to the original heating system of the vehicles. In such a way, heat can be supplied by the heater to driver ’s cab and passengers’ compartment no matter the engine is working or not working. The schematic diagram is shown in Fig. 1.air heating car heater (hereafter referred to as heater) is small oil burner controlled by microcontroller, and its body (heat exchanger) is located in bell-shaped shell which forms an independent air channel. The cold air is inhaled into passage by the heating fan, and then blew out after heated, thus forming an independent heating system which is not influenced by the heating facilities in vehicle itself. In this way, no matter vehicle engine works or not, both cab and passenger compartment can be warmed by car heater.
material of tube material of fin voltage:12v-600v wattage:2w/cc2-6w/cc2 fins distance:3-10mm fin width:0.3-0.4mm fin high:3-5mm working temperature:up to 800 celsius size:customized shape:customized
Duct heaters are mainly used for heating air through the duct. There are three types, low temperature, middle temperature and high temperature. The outer stainless steel sheath and construction can reduce the vibration of heating elements. There is a overheat protector in the terminal box. Air pressure through the duct should not exceed 0.3KG/cm?. Or else it is better use recirculation duct heaters. Max temperature of low temperature duct heater is not more than 160 C. Max temperature of middle temperature duct heater is not more than 260 C. Max temperature of high temperature duct heater is not more than 850 C. lt has been applied extensively in aerospace industry, weapon industry, chemical industry, and research and manufacturing laboratories in institutions of higher education. etc.
Product model:GH-15/30/50M GH-10/15/30/50M 1. Portable air heater 2. Function on propane gas (LPG) 3. With over-heating protection 5. Cut-off protection avoid gas leaking 6. Waterproof class IP24 7. Manual ignition . 8. Regulator & 1.5m hose included 9. Special nozzle, with strong oxygen supply make combustion completely 10. Ideal for construction sites, utility/farm buildings, sports events, barns and factories Product name: Manual gas heater more products more products 2_03 about us 2_05 Packaging&shipping 2_07 FAQ 1: Are you a factory or trading company? We are trade company with export experience many years . 2: What is your MOQ? Usually the MOQ is 20'FT or 40'HQ, different model is different MOQ. 3: What is your payment term ? Dear customers,our payments are deposit 30% , before shipment 70%. 4: How is your delivery time ? Usually 7-30days, according to the products and quantity , delivery time will have different. 5: How does your factory do regarding quality control? Our inspector QC will check the part in every process ,if they find any problem ,we will take full inspection and revise issue product .on put it into carton before meke sure quality is prefect .
