we are giving promotional offers for DC chargers kindly reach us at EV charging solution all range available 60KW 80KW 120KW 140KW 160KW 180KW
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Ac to dc battery charger (12v/24v/48v, 5a/10a/20a/40a) Special features: 1. Led indicator light show charging status. 2. Temperature controlled cooling fan. 3. 3-stage battery charging: bulk charge, absorption charge, float charge 4. Switch mode technology 5. High efficiency and led visual display 6. Protection: over temperature, short circuit, reverse polarity Inner box and carton
The 400KW-1000A high power AC-DC charger is designed to meet high power demands, providing up to 400kw output power and supporting up to 1000a of current. Its control technology ensures low harmonic output during the charging process, reducing interference with the power grid, while the charging process is stable and reliable. Its output constant power function can automatically adjust the output power according to the state of the battery, so that the effect of the charging process remains stable, providing users with a reliable energy supply. For users, this charging cabinet provides convenience. Equipped with a 5-inch colour lcd touch screen provides an intuitive operation interface, allowing users to operate and control easily. The pluggable power module design facilitates post maintenance and repair work and reduces operating costs. In addition, the input and output are equipped with protective circuit breaker switches to further ensure the sex and reliability of the charging process. Designed with the user's needs and experience in mind, this charging cabinet not only provides high power output capability, but also excellent stability. Whether it is for industrial production or daily life power supply, it can play its performance to meet a variety of needs.
Our DC-DC converters and rectifiers are designed for telecommunication and industrial use only. Full customization and custom-specific designs can be provided. Detailed brochure available.
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Wall box DC charger, energy vehicle DC 30KW, wall mounted installation method, overall dimensions 410*250*610(mm) wide, thick, high, wiring mode down in and down out, output mode single connector, 5M cable, input frequency 45-65HZ, output voltage 200-1000V, input voltage AC 380V �±20%, metering accuracy Level 0.5, current limiting protection â?¥ 110%, interface 4.3 inch LCD color screen, LED indicator light, working temperature -25 -+50 operating humidity 5%-95% frost free, protection level IP54; cooling method forced air cooling, noise control 60dB.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
General product information: Skyrc d250 charger/discharger/power supply (released) New features: , · voice guide , · black screen , · dc power supply , · synchronization mode , · power distribution board included Input voltage: ac 100-240v / dc 11-18v Charge circuit power: dc input 2*125w ac input 250w (support distribution) Discharge circuit power: 2-10w Power supply power: 10-150w Current drain for balancing: max. 300ma/cell Trickle charging current: 50ma-300ma & off Lipo/life/liion battery cell: 1-6s Nimh/nicd battery cell: 1-15s Pb battery voltage: 2-20v Dimension: 184*146*70mm Weight: 1235g Packaging includes: Ultimate duo 250w Cord adaptor x2 Cable x2 connectors with xt60 connector Charging cable x2 input/output cable Distribution board
Main features of the system Modular design, N+1 backup,smooth expansion Perfect monitoring function, high intelligent Main monitor items: turn on/off, output voltage regulation, output current limit set, automatic battery management Automatic Battery management and maintaining: real-time monitoring of battery pack terminal voltage, charge/discharge current, automatic even and float charging regular even charging Automatic temperature compensation Hot plug, easy to replace and safe
