stamping parts with the largest depth around 470mm. We can press the box or round shape of product which widely use at car or architure industry.
hot die forging spare parts with the weight range from 0.5kg-88kg. We can also do heattreatment and machining as well. We make product based on drawings. Our product had widly use at earth moving, automative, quarrying, oil, marine etc. vehicle parts : such as hub, connecting rod, universal joint ,crankshaft, knckle etc. marine: hook, container bucket, rig, clamp oil: valve body and bonnet
undercarriage spare components (1) track link 90-318pitch (2) sprocket segment 3,4,5,9 tooth (3) idler
forging rings(largest at 1500mm diameter) we can also do HT and machining as well.
We offer world’s best quality tyre protection chain of lazar shanparts Loaders are the must of the stone and marble quarries, and tyre protection chains are the must of the loaders. Chains protect the expensive tyres of the loaders under the very though conditions of the quarries and also increases the traction and the handling capacity of the machine, with higher productivity per hour and lower down time. Experiences and numerous applications all over the world proofed that las zarh offers the best cost per hour performance at hot slag removing. The special link and mesh design and heat resistant formulated alloyed steel gives excellent results not only at hot slag but also at scrap, waste recycling and glass industry. Las zarh offers the longest life and the highest performance even underground and offers complete solutions for every kind of operation and every type of machine. They produce special design and dimension chains for every kind of mine site and every size of machines.
The main functions of the hydraulic splitter: quarrying blocks; secondary disintegration of large ores (metal mines, non-metal mines); 2. Partial and complete demolition of concrete components (cement pavement, machine base, bridges, house components); 3. . 1. Demolition of concrete structures in indoor or confined spaces, 4. Rock mining of tunnels, canals, etc. 1. Quarrying and mining industry (mining of large blocks, large block division, removal of large waste rocks, etc.) 2. Construction engineering (tunnel excavation, underground tunnel excavation, artificial river mining, artificial river, rock excavation, etc.) 3. Demolition works (concrete, reinforced concrete demolition, old building demolition, old wharf demolition, etc.) 4. Chemical metallurgical production overhaul project (smelting furnace overhaul, various kiln brick masonry demolition materials engineering, etc.) 5. All kinds of emergency rescue and disaster relief, mine clearance and other work, traffic accident rescue work)
Attractive prices directly from the integrated block manufacturer Available materials: aluminum What you need to know before designing a manifold block Block thicknessThe block The initial thickness of the block is set at 5 times the maximum diameter of the valve port, and then gradually reduced according to specific requirements. Drill oil holes Deep, slant holes The process hole should be as small as possible, considering the high flow chamber first and then the pilot chamber. Wall thickness of each hole The safety wall thickness between oil chambers should not be less than 3~5mm, and should consider the deflection of the drill bit within the allowed range. Oil chamber The flow rate of hydraulic oil in the oil chamber should not be higher than 12m/s, and the return chamber should be 20-40% larger than the inlet chamber. Hydraulic manifold applications. Various hydraulic systems and hydraulic equipment - Mobile applications - Mechanical and engineering applications - Factory automation and machining Hydraulic manifolds for many industrial sectors:. Mining machinery - Forestry machinery - Construction machinery - Quarrying machinery - Mining machinery - Agricultural machinery - Waste and recycling equipment - Material handling industry and many more industries. The more you can click here.
