Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Aggregates are mixtures of sand, gravel, crushed rock or other bulk minerals used in construction, principally as a component of concrete, and in civil engineering. At CEMENTATION we supply aggregates for a range of core applications, from fill materials to aggregates that can be used in concrete, precast concrete, asphalt and for surface dressing. Aggregate plays an important role in concrete and construction part. We supply quality material which makes durable concrete with higher compressive strength and low permeability having better finish. We can supply a wide range of coarse, fine and blended aggregates in accordance with international standards. We acquire rock mines and stone crushing plants and enable us to fulfil contract of any size. Progressive stages if crushing and screening enable us to produce a range of aggregate sizes (06mm to 65mm) APPLICATIONS Road and Highway surfaces Constructions or Civil work Railway Ballast To make Concrete or Asphalt Filling
We have 1unit of Truck Lift fork and 1unit of SIMS Wheel Loader which were made in USA All not so many used. Please consider if it is suitable for your market.
We have 2units of Samsung (SD20) brand bulldozers brought from the Korean military. It's in good condition because it was brought from the military.
Supply Ability: 1000 units per Year Compacting width: 2390 mm Hydraulic pump brand: Famous Brand After-sales service provided: Overseas service center available Dimension(L*W*H):(6320*2300*3200mm Exciting Force: 320/160 KN UNIQUE SELLING Environmental, Long POINT: lifetime,Energy-saving,Large Warranty of core components: 1 year Travel Speed: 2.54-10.51km/h Hydraulic valve brand: Famous Brand Machinery Provided TA Condition: New Place of Origin: China Warranty: 1 Year Engine Brand: SHANGCHAI Drum: Single Drum Roller Weight: 18 TON Certification: CE/ISO9001 Brand Name: XCMG Vibratory drum distribution weight: 9000kg Video outgoing-inspection: Provided Type: Vibratory Roller Certification: CE/ISO9001 Brand Name: XCMG Vibratory drum distribution weight: 9000kg Video outgoing-inspection: Provided Type: Vibratory Roller Core Components: Pressure vessel,Motor,Bearing,Gear,PLC Marketing Type: Hot Product 2019 Applicable Industries: Manufacturing Plant,Farms,Retail,Construction Grade Ability: 30% Power: 115kw Packaging Detail: Comply with Export Packaging Requirements
Supplier: Used construction machinery, excavators, dozers, cranes, backhoe loaders, access platforms, boom lifts, dumpers, telescopic handlers
Buyer: Used construction machinery, excavators, dozers, cranes, backhoe loaders, access platforms, boom lifts, dumpers, telescopic handlers
Available in sizes 3/4" through 3 " up to 15,000 PSI non-stock cold working pressure, our Swivel Joints offer the following features. Minimum flow restriction Heavy duty hex head style ball loading plug Grease retainer ring (ensures clean ball race) Standard packing units Superior hardened ball races ensure uniform surface hardness and depth for longer life under severe thrust and radial loading Standard Swivel Joints are provided with API line pipe threads. Other end connections are available on request Available for standard and sour service All sizes are available in 8 styles, for 360 rotation in 1, 2 or 3 planes. For price and specification please contact us
Supplier: We supply all types of heavy machinery, equipment and materials for construction, infrastructure, production and manufacturing, mining, transportation, health care, energy, industrial and many more sectors.
Services: Trading company, import, export, air freight, sea freight, customs clearance, door to door services,.
