GA731 rapier loom can weave all kinds of nature fiber, rayon and synthetic filament. It is the most suitable to weave all kinds of fabrics involved the fields of furnishings, upholster, tour, civil engineering, industry, such as wool fabric, linen, silk, cotton, chemical fiber, sunscreen fabric, jute, glass fiber, flat yarn, jacquard, leno weaving, etc. Main Technical Parameters >>Reed width: 150, 190, 210, 230, 260, 280, 320, 360, 380, 460(cm) >>Speed: 150cm: 320~430 RPM 190cm: 312~430 RPM 280cm: 232~320 RPM 320cm: 224~300 RPM 380cm: 195~280 RPM >>Insertion rate: 1000m/minute ~ 1200m/minute >>Weft density: Mechanical take up: 3~68 picks/cm >>Electronic take up: 3~120 picks/cm >>Shedding device: Mechanical Dobby/ Electronic Dobby (20 shafts Max) >>Electronic Jacquard >>Let-off: Mechanical /Electronic >>Take-up: Mechanical /Electronic >>Beating: Conjugated cams with double drive on both sides >>Weft insertion: Slay driven by conjugated cam >>Weft beam: Single / Double >>Flange diameter: 800mm /1000mm (selectable >>Cloth roller: Diameter 550mm >>Power: Total consume< 4.6kw >>Control: CPU controlling system >>Weft selection: Electronic weft selector >>Function: Pick auto-finding, mark prevention. Reed Width: 190cm 210cm 4sets per 40GP with pallet Reed Width: 230cm 3sets per 40¡¯GP with pallet Reed Width: mare than 230cm 2sets per 40¡¯GP with pallet.
Rapier looms Total 47 looms picanol gtn 4 r Width 190 cms, with staubli dobby 2232 Each loom with 2 weftfeeder, 1.5 warp beams, 10 healdframes, 1, 5 fabric roller, 5000 heddles and droppers In container
Rapier loom Main specification: Reed width: 180cm, 200cm, 230cm, etc.According to the customers need. Rotation speed(r.P.M):220-240 Weft selection:4colors Number of heddle frame: 16pages Electrical control:p.L.C Power(kw):1.5-1.8 Dobby open-end device: adopting gt221 high speed dobby(engine drive) Dobby feathers: Adopts advanted maching methods and technology, guarantee the balance of the frame movement. Adopts rigid driving.Suitable for the production of weighter fabrics. High precision, low voice. Dobby parameters Composition:dobby and dobby heald reversing motion Type of shedding: double lift full open Method of mounting:in high position, left and right side Lifting units: 20(include colorselecting) Pitch:12mm Signal reading method:cycle card Lubricate:semi-auto lubricating Suitable speen for looms:280r/min Suitable reed width for looms:140cm-380cm Signal features Advanced instructure, suitable for higher loom speed. Stable driving, safety and reliable movement. Suitable for weaving more complicated patterns. Easy and rapid for changing the variety of the fabric patterns.
QJH910 flexible rapier loom is the most popular machine and the representative of mature technology among all the weaving looms we supply. This high speed rapier loom model has applied the latest mechatronics technology, and can achieve stable performance with low vibration and less noise. The machine can also change weaving speed to suit various weaving needs. It is one of the most economical textile looms for sale with high intelligence and high cost performance. Salient Features Accurate Control The weaving loom adopts digital loop control servo electronic let-off and take-up, to achieve the constant tension weaving. Strong Beat-up Powerful bilateral conjugate cam generates strong beating rigidity. Optimal Fabric Quality With the functions of digital control positioning stop and run, intelligent auto pick finding, auto compensation for weft breakage and warp breakage, the flexible rapier loom can improve the fabric quality. Fast Fault Control The loom can realize intelligent fault display and accurately determine the fault reason, and provide test scheme. Convenient Management The loom can automatically calculate yield and total output, and can realize group control by management network. it also has the function of changing fabric variety in the shortest time. Technical Parameters Width 190cm, 210cm, 220cm, 230cm, 260cm, 280cm, 300cm, 320cm, 340cm, 360cm Operation speed 190cm 380~420rpm 280cm 258~285rpm 320cm 226~250rpm Yarn scope 3s~80s, cotton, wool, linen, blended yarn, polyester and etc. Weft density 1.57~134 picks/cm Take up electronic take-up driven by servo motor, beam diameter 600mm (on loom) or 1200mm (off loom) Let off electronic let-off driven by servo motor, beam diameter 800mm or 1000mm Shedding Underneath type electronic dobby 12~20 frames Color selector high speed electronic weft selector controlled by stepping motor, 4~16 colors Weft insertion maximum 1080m/min Selvage electronic leno selvage device Main drive high power main motor, power rating 5.5KW Automatic functions automatic warp stop, automatic weft stop, automatic pick finding Electronic control With 32-bit CPU control system and embedded software, the rapier loom can guarantee with highest fabric quality, prompt detection of machine error and the convenient management.
QJH810 rapier loom has been a best seller since the first machine was released to the market. It is an auto loom machine that carries excellent mechanical and electronic performance. This type of weaving loom machine has a precise control of the tension from warp and weft, hence improving the fabric quality. The weaving adaptability of QJH810 is very extensive, including natural fibers like cotton, wool, linen, silk, artificial fiber and all kinds of light, medium, heavy weight blended fibers. This model is the best price loom machine for sale in our company. Salient Features High Cost Performance and Practicability The loom embodies nice appearance, reliable structure, advanced electrical control system and convenient operation; it has low energy consumption and easy maintenance. Special Design of Conjugate Cam Our technicians use computer technology to optimize the contour line of the conjugate cam to ensure a more reliable and stable acceleration movement during weft insertion process. The conjugate cam is made from composite steel to realize an excellent performance in strength and endurance. Diversified Configuration Customers have a choice to make changes on take up mechanism, let off mechanism according to their practical usage. This model can also match with SRD motor, without clutch and reduction gearbox driving device, the structure of the loom is more simple and stable. The changes of the structure will save at least 15% of electricity than the common clutch model. SRD motor is new type of high technical machine with high efficiency and stability and can be easily maintained. Technical Parameters Width 190cm(75"), 210cm(82"), 230cm(90"), 280cm(110"), 300cm(118"), 340cm(134") Operation speed 180~360rpm Yarn scope short fiber 5-500Tex (200-2Nm), filament 15-3500Td (1.7-380Tex) Weft density 3~80 picks/cm Take up mechanical or electronic take-up, maximum cloth diameter Ï?550mm on loom and Ï?1200mm off loom Let off mechanical or electronic let-off, beam diameter Ï?800mm or Ï?1000mm Shedding cam shedding (4~8 frames), mechanical dobby, electronic dobby (12~20 frames), electronic jacquard Color selector electromagnetic type, 4~8 colors Weft insertion maximum 1080m/min Selvage electronic leno selvage device Main drive 4KW; direct drive also available Automatic functions automatic warp stop, automatic weft stop, automatic pick finding Electronic control advanced 32 bit single chip microcomputer Fabric weight 20-450g/m ²
Motor power:1.8KW Weight:1900-2300kg
HST series terry rapier loom is innovative design after the assimilation and absorption of imported advanced technology from Japan HIRAIWA and other international advanced machines. There are three series and six types terry looms with various specifications, it is a guarantee for meeting all kinds all kinds of the customers' demands. Robust frame structure, compact composition and series modularity in design, result in this machine being the first choice of customers. Specifications Model:RFHST30 Mian reed width:240cm,260cm Designing speed: 370rpm Economical speed: 300~330rpm Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central. Beating:Conjugated cam drive Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm) Pile warp let-off:Tension Sensor&Converter motor(Pile beam diameter:1000mm) Shedding:Electronic dobby/Electronic Jacquard Take-up:Electro-magnetic mechanical(Roller diameter max: 550mm) Looping:Positive cam&double broaches(Loop length:0~20mm). Display:10.4 inch big LCD screen/5.7 inch LCD touching screen. Model:RFHST40 Mian reed width:240cm,260cm Designing speed: 370rpm Economical speed: 300~330rpm Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central. Beating:Conjugated cam drive Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm) Pile warp let-off:Tension Sensor + Servo motor drive(Pile beam diameter:1000mm) Shedding:Electronic dobby/Electronic Jacquard Take-up:Servo control system(Roller diameter max: 550mm) Looping:Positive cam&double broaches(Loop length:0~20mm). Display:10.4 inch big LCD screen/5.7 inch LCD touching screen. Model:RFHST45 Mian reed width:240cm,260cm Designing speed: 370rpm Economical speed: 300~330rpm Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central. Beating:Conjugated cam drive Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm) Pile warp let-off:Tension Sensor + Servo motor drive(Pile beam diameter:1000mm) Shedding:Electronic dobby/Electronic Jacquard Take-up:Servo control system(Roller diameter max: 550mm) Looping:Servo motor control(Loop length:0~20mm). Display:10.4 inch big LCD screen/5.7 inch LCD touching screen Reed Width: 190cm 210cm 4sets per 40¡¯HQ with pallet Reed Width: 230cm 3sets per 40¡¯ HQ with pallet Reed Width: mare than 230cm 2sets per 40¡¯ HQ with pallet.
Np5200l electrical doddy is low-positioned intelligent positive shedding device that applies to rapier looms. It is capable of weaving fabrics with up to 12, 800 weft picks. It has the advantage of quickly changing fabric patterns and is particularly suitable for thick and heavy fabrics. Technical parameters: Reed space1500mm~3600mm Max. Rpm550rpm (1900mm) Weft picks12800picks Pitch12mm Max. Lifting units20 pcs Heddle330mm Shedding amount55mm~190mm
Supplier: All type clothes, urea, all type agriculture and food items, all personal and entertainment items, all industrial and automotive items, all construction household and furnishing, all computers electronics and electrical, handicraft, items, npk, fertilizers t shirt, blanket,dry fruits, animal feeds, towel, bedsheets, toys, all grocery, copper wire scrap, copper ore concentrate, zinc ore concentrate, lead concentrate, fly ash, a4 paper, a3 paper, craft paper, occ, ldpe, hdpe , pvc resin, petroleum products, jp54, jet a1, crude oil, blco , biodiesel, diesel, fuel, coal, d2, petcock, pulses, mustard oil, spices , sanitizer, gloves, medical products, cement, core sand, old ships lng, lpg, all groceries items, food products, hms1 and hms2, fish, chicken feet, chicken paws, agri & food processing agriculture products, fertilizers, seeds, farm products grains, fruits, vegetables, river sands, aggregates, pvc electrical wire, rice, charcoal, wheat flour
Services: Export, import, merchant export import
Buyer: All metals, minerals, petroleum products, food products and paper products
