Aluminum plastic composite panel Specifications: 1) standard size: 1220*2440 2) aluminum thickness: 0.026----0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 5) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customers samples available. 6) core: fire-resistant polyethylene or normal polyethylene(pe) 7) standard specifications can be altered to meet customers specific requirements
Taking advantage of American PPG and Sweden Becker PVDF painting, our products enjoy a long-term duration of bright color. Applying the Macro-Molecule Adhesive Film from South Korea BOKWANG CHEMICAL, the peeling-strength lasts more than 10 years. Flatness and Levelness process craftsmanship from German Henkel guarantee the adhesive strength of the surface.
With coat-hanger channel design, The upper die lip is micro adjustable;lower die lip can adjusting product thickness and 45 degree blocking bar . Products of conventional width is 1400mm,1700mm. Thickness range is from 1 to 9 mm..
EPM A2, B1 & Non-FR. At EPM's purpose-built high speed production line using the most advanced technology in the industry and covering an area of more than 50,000 square meters, our multi-million dollar state-of-the-art facility has an annual capacity to produce in excess of 60 million square meters(600 Million Square Feet) of Aluminium Composite Panels using the very best raw materials from internationally renowned suppliers. EPM A2 ACP EPM's A2 Fire-Retardant ACP core consists of well-balanced combination of combustible (LDPE) and non-combustible (Mg (OH)2) in the core, will prove resistance to fire thereby delaying combustion, and declining further spread. Where an A2 SCP core should be 90% of non-combustible proportion with 10% balanced mix of LDPE and other supplements. EPM FR-B1 ACP EPM's FR-B1 is composed of a modified mineral-based core which consists of non-combustible mineral (Magnesium Hydroxide) and small quantity of low-density polyethylene with a composition of 73% of mineral plus 25% of LDPE and 2% of other additives sandwiched in two aluminum skins. EPM NON-FR ACP EPM's Non-Fire Retardant ACP core is made up of 100% LDPE, Low-density polyethylene (Linear or Recycled) which is a plastic based core, a petroleum by-product and of course 100% combustible and contribute to increase the intensity of fire propagation when they burn and changes a small fire to a big disaster. EPM ACP SPECIFICATIONS Panel Measurements Length 2440mm, 3200mm, 3600mm, up to 6000mm Panel Thickness 3mm, 4mm, 5mm, 6mm Aluminum Skin Thickness 5mm, 0.4mm, 0.3mm Weight 3mm=4.5kg/m2: 4mm=5.5kg/m2 6mm=7.3kg/m2 (Polyethylene Core) 3mm=5.8kg/m2: 4mm=7.6kg/m2 6mm=10kg/m2 (Modified Mineral Core)
Aluminum composite panel production line Stable technology Easy operation and maintenance Wide application Ce certificat The speed is depends on the thickness of acp. This is the 5th type of vacuum exhaust production lines, which developed from our years of actual experience with the latest technology both in china and abroad. We have sold more than 400 lines over the world. Performance of the line has reached the criterion of imported equipment, even exceeded in some parts. Characteristics of the line are one-time composition, easy operation, good stability, and good quality. Standard wooden cases and pe film
Aluminum composite panel production line Composite line Functions: Aluminum composite panel production line is designed to produce aluminum composite panels. Pe is processed to be sheet after extruded by extrusion machine of high power and t-die molding, then the sheet is sandwiched with top, bottom aluminum coil and two layers of adhesive film to compound together. The production procedure of continual heat-compounding ensures products with high intensity and smoothness after series cooled and formed in panel. The definable board size cross-trimming system install approaching inductor or meter control which is convenient to meet customersf+ requirements to finish production. The reasonable structure and pneumatic parts from famous brand such as abb ensure stable operation. Wooden case
Features It is a composite tile made by aluminum panel and mineral fiber /fiberglass panel. It completely integrates the mineral fiber/fiberglass panel tile's comprehensive anti-resistant effect with high density aluminum panel, so as to substantially improve the flatness and anti-resistant effect of the tile. After installation, with three layers design of our product, the mineral fiber/fiberglass panel and aluminum panels effectively block the air convection, so that it achieves its purpose of energy saving and heat preservation, at the same time provides good acoustic effect. Application: Shopping mall, office building, stadium, airport, factory, school, hospital, bank,hotel, conference hall , meeting room and theatres etc. Products Data: Acoustical: (NRC>0.80) Flatness, Insulation ,energy saving Friendly environment, anti-resistant Fireproof: Class A Thickness(mm): 10,15 Size(mm):600x600,600x1200,300x1200 Other sizes can be customized.
ACM thickness:2mm, 3mm, 4mm, 5mm, 6mm. Aluminum thickness:12mm, 0.15mm, 0.18mm, 0.2mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm. Panel size:1220mm*2440mm (regular),1250mm*2440mm,1500mm* 5000mm. Package:suitable for the container Payment:30% prepayment by T/T before production, 70% balance by T/T before shipment, or 100% irrevocable L/C at sight. Delivery time:10-15 days from the date that we get your prepayment.
Aluminum composite panel Specifications: 1) standard size: Thickness (t) : 1 mm, 2 mm, 3 mm, 4mm, 5mm Width (w) : 1220 mm£¬1250mm Length (l) : no limitation 2) aluminum thickness: 0.3/0.4/0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 6) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. 7) core: fire-resistant polyethylene or normal polyethylene(pe) 8) standard specifications can be altered to meet customer¡¯s specific requirements Please contact me if you are interested in our products, please contact me
Aluminum composite panel We are an aluminum composite panel (acp) manufacturer located in shanghai city (the most vigorous economic region in china). We have 7 products lines with a anuual capacity of 10, 000, 000.00 square meters. The acp thickness we can supply 1 to 6mm and the width is less then 1600mm. We have advantage on 0.03 to 0.5mm for aluminum thickness. Coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. For more detailed information about our company, please visit our website. If there is anything you are interested in, please feel free to contact me.
