3g series three screw pump It applies to deliver clean and non-corrosive medium which has lubricating property at temp blow 150 with the viscosity of 3-760cst. The pump working pressure range from 0.6mpa to 2.5mpa and flow rate range from 0.6m3/h to 123m3/h Feature Medium is delivered in axial direction continuously without agitation and pulsation Small vibration and low noise High pressure and high efficiency Simple structure, easy disassemble and assembly Small volume and light weight Slight wear and long life Materials: Driving and driven screw:16mncrs5, 40cr, 46, 38crmoal Pump body: ht200, qt450-10, zcusn10p1, zg270-500 Export standard case/plywood case
Screw pumps Single, twin and triple screw pumps (positive displacement pumps)for application such as loading, unloading, transfer, dosing, draining, re-circulation, feeding to spray driers, filter presses, centrifuges, digester, evaporators etc.
The signle screw pump is an ideal pump for feeding to the decanter centrifuge without shearing or agitating the drilling mud. The main parts are screw shaft (rotor) and screw shaft bushing. Because the special geometry shape of the two parts, they form pressurize capacity separately.
These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and are manufactured for varying column length to suite the pump depth. The suction port of all the pump sizes are designed so that a strainer can be attached to prevent and large solids entering the pump. These pumps are available in only close coupled configuration. A variety of material of construction, shaft sealing options are also available. Single Stage Pump Capacities upto 500 m3/hr Pressures upto 12 bar These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and manufactured for varying column lengths to suite the sump depth. Vertical-Single-Stage Multi Stage Pump Capacities upto 500 m3/hr Pressures upto 12 bar These vertical pumps are designed to operate with the pumping elements immersed in the product. These pumps are compact and space saving. They are custom designed and manufactured for varying column lengths to suite the sump depth. Material Options WETTABLE HOUSING COMPONENTS: Fabricated Steel Fabricated Stainless Steel. STATOR: Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer Aflas HNBR. ROTOR: Tool Steel Case Hardened Steel Alloy Steel Stainless Steel. COUPLING ROD: Alloy Steel Stainless Steel. SHAFT: Alloy Steel Stainless Steel. OTHER EXOTIC MATERIALS: Duplex Super Duplex Alloy 20 Haste alloy. ROTOR SURFACE COATINGS: Ceramic Coatings Tungsten Carbide Hard Chrome Plating. PROTECTIVE COATINGS: Rubber Lining Epoxy Coatings. Price Range: Rs.25000 to Rs. 50 Lacs* * Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Roto Xtra Value Progressive Cavity pumps are of heavy-duty construction and are designed to pump tough to handle fluids with ease. These pumps are used in many areas of Industry. The construction of these pumps is based on the modular concepts and incorporates next-generation pumping elements (molded to metal) stator, solid shaft and double sealed Cardan Universal Joints for improved performance and longer service life. These pumps are available in bare shaft and close coupled configuration. 6 and 8 stages in select sizes. A variety of material of construction, shaft sealing options are also available. Single Stage Pump: This Heavy-Duty cost effective pumps use the extended Rotor, Stator Geometry and result in lower rubbing velocities which are ideal for the Sewage & Effluent Treatment applications. These Pumps are available in Close-Coupled & Bareshaft Configuration. Multi-Stage Pump: These heavy-duty pumps are designed for continuous or intermittent duty and are suitable to perform efficiently even for the most difficult fluid handling applications in wastewater,chemical, and food industries. These pumps are available in bare shaft and close coupled configurations. 6 and 8 stage pumps are also available in select sizes. Wettable Housing Components: Cast Iron Cast Stainless Steel Fabricated Steel Fabricated Stainless Steel Stator: Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer Aflas HNBR Rotor: Tool Steel Case Hardened Steel Alloy Steel Stainless Steel Coupling Rod: Alloy Steel Stainless Steel Shaft: Alloy Steel Stainless Steel Other Exotic Materials: Duplex Super Duplex Alloy 20 Haste alloy Rotor Surface Coatings: Ceramic Coatings Tungsten Carbide Hard Chrome Plating Protective Coatings: Rubber Lining Epoxy Coatings Price Range: Rs. 25000 to Rs. 20 lacs* * Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Roto s Vertical Twin Screw Pumps are available in both external & internal bearing configuration. Pumps with steam jackteing as an option is also available. The suction & discharge ports are in a line. Mechanical seals are standard. Option for gland packing is also available. Pumps are fitted with relief valves suitable for 100% bypass. Vertical Internal / External Bearing RV series Capacities upto 500 m3/hr Pressures upto 40 bar These pumps are designed to suit the areas where space is a constraint. They are available in internal as well as external bearing configurations. These pumps can handle fluids with high temperatures upto 3500C / 6600F with or without steam jacketing, electrical/steam tracing arrangement as an option. API 682 type seals can be mounted. Built in safety relief valve designed for 100% bypass. MOC CASING: Cast Iron, Cast Steel, Fabricated Steel Fabricated Stainless Steel. LINER: Case Steel, Stainless Steel. SCREWS: Alloy Steel Stainless Steel, Hardened Steel. TIMING GEARS: Hardened Steel. OTHER EXOTIC MATERIALS: Duplex Super Duplex . SCREW SURFACE COATING: Hard Chrome Plating. Price Range: Rs. 1.25 Lacs to Rs. 50 Lacs* * Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Wide application Single screw pump is used in all fields widely to feed kinds of medium, running at a constant pressure continously without pulse and damage when feeding medium , and change the gauging aim through adjusting rotation Feeding medium This product is applicable for feeding medium which has the followig properties High solid cotent(diameter of the bigest particle is 50mm)or no solid content Medium with all viscosites(1mpas~3000000mpas) Medium that is easy to be generated and swelled Shearing sensitive medium Medium with erosion Medium with/without self lubrication Erosive medium(ph-0~14) Adhesive medium Toxicity hazard medium
G-type screw pump PRODUCT DETAILS The working principle of the screw pump is to use the single-headed spiral rotor to perform eccentric rotation in the stator of the double-headed spiral inner cavity. Our company specializes in filter equipment and related accessories, such as the series of plate and frame filter press, chamber filter press, membrane filter press, cast iron filter press, stainless steel filter press, filter plate, filter cloth, water faucet and other accessories. Filter press be widely used in petroleum, chemical, food, pharmaceutical, paper making, coal washing, ceram, mine, and other sewage treatment industries. The filter press has 320/450/630/800/1000/1250/1500/2000 types. The filtration area ranges from 0.5 to 2000 square meters. Compaction types include jack compacting, mechanical compacting, hydraulic compacting, etc. The material of filter plate contain enhanced polypropylene, TPE, glass fiber polypropylene, cast iron, stainless steel, etc.
Screw solar pump with 15 meter cable and head is 30 meter .this dc pump can run by one solar panels 250w
Equipment Summary and features Can Use for 5 Gallon(20kg) Barrel packaging Iron and plastic barrels Suitable for 10,000-1,000,000cps high viscosity liquid Equipped with high pressure special valve to realize high viscosity liquid precision dispensing and greatly improve production and glue quality Use the liquid within one month after the packing is opened Motor power:400W Rotor diplacement: 1.5/3/6cc Maximum delivery pressure: 80 kg Repeated precision: +- 2% Maximum glue dispensing volume: 5ml/sec Rated voltage: AC 220V Minimum glue dispensing amount: 0.005ml/sec Rated frequency: 50HZ Rated power: 500W Rated pressure:0.6MPA PMP-20 screw pumps are suitable for low, medium high viscosity or abrasive liquids such as silica gel, epoxy, grease, heat conducting gel, UV, etc. The 5 gallon / 20L barrel is used, and the pressure plate sealing method is adopted to facilitate the use and replacement of glue. The stator and rotor are driven by the servo motor to ensure the realization of precision measurement, and solve the problems of glue breaking, unstable glue amount and uneven lines caused by the unstable pulse and air pressure of the traditional pneumatic piston pump. The servo screw mode can be used in all dispensing processes such as bonding, fixing, potting, bottom filling, plane sealing or double liquid dispensing Solve the problems of unstable pressure in pneumatic glue supply and transportation mode and unstable pressure caused by the change of rubber barrel affected by resistance, which affects the repeated accuracy of dispensing Solve the pulse instability caused by pneumatic or cylinder and piston rubber supply and transportation The equipment is equipped with a special servo drive controller with its own touch screen. Adjust the glue amount through the working speed function item. The larger the value is, the larger the glue amount is (the minimum is 0.005ml, the maximum is 5ml / sec, and the size can be customized)
