Since 2010 we are engaged in trading & exports of ceramic products, very high Quality of Zirconium Silicates & Zirconium Flours for ceramics. We mostly supply Zirconium 2, Zirconium 5 and Zirconium Flour 325 mesh to ceramic industries. Application Of Zirconium Silicates : Opacifier for pottery and porcelain glazes ,wall tiles, roofing tiles, sanitary ware etc Frits, Glazes & Enamels. Admixture for ceramic body. (Improvement of property and Opacification of color) Typical Chemical Properties Composition - Zirconium Silicate (ZrSiO4) Zirconia + Hafnia (ZrO2 + HfO2) : 65.00% Min. Silica (SiO2) : 35.00% Max. Alumina (Al2O3) : 00.70% Max. Titania (TiO2) : 00.20% Max. Ferric Oxide ( Fe2O3) : 00.10% Max.
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (T/T). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, ± x 10-7 ( C-1) [50 C-500 C] - 63.8 RESIDUE CONTENT Residue Content on 63¼m (w/w %) - 1.7 Residue Content on 106¼m (w/w %) - 1.6 Fired Shrinkage (%) (@1200 C) -8.5 Water Absorption (%) (@1200 C) - 2.6 DRY MOR (kg/cm2) - 57 FlRED COLOUR L Value - 71.3 a Value - 4.4 b Value - 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) 60.23 Aluminium as A2O3 (%) 25.26 Titanium as TiO2 (%) 1.00 Iron as Fe2O3 (%) 1.94 Sodium as Na2O (%) 0.04 Potassium as K2O (%) 1.70 Calcium as Cao (%)  0.01 Magnesium as MgO (%)  0.60 Phosphorus as P2O5 (%)  0.03 Manganese as MnO (%) 0.01 Chromium as Cr2O3 (%) 0.01 Zirconium as ZrO2 (%)  0.04 Hafnium as HfO2 (%)  0.00 Sulphur as SO3 (%)  0.00 Strontium as SrO (%) 0.01 Loss on Ignition (%) (@1025 C) 9.1 MOISTURE CONTENT (%)  28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 yearsâ?? experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Plastic Ball Clay Specification: DILATOMETRIC ANALYSIS Linear Thermal Expansion, �± x 10-7 (�°C-1) [50�°C-500�°C] --> 63.8 RESIDUE CONTENT Residue Content on 63�¼m (w/w %) --> 1.7 Residue Content on 106�¼m (w/w %) --> 1.6 Fired Shrinkage (%) (@1200�°C) --> 8.5 Water Absorption (%) (@1200�°C) --> 2.6 DRY MOR (kg/cm2) --> 57 FlRED COLOUR L Value --> 71.3 a Value --> 4.4 b Value --> 21.2 CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) --> 60.23 Aluminium as A2O3 (%) --> 25.26 Titanium as TiO2 (%) --> 1.00 Iron as Fe2O3 (%) --> 1.94 Sodium as Na2O (%) --> 0.04 Potassium as K2O (%) --> 1.70 Calcium as Cao (%) --> 0.01 Magnesium as MgO (%) --> 0.60 Phosphorus as P2O5 (%) --> 0.03 Manganese as MnO (%) --> 0.01 Chromium as Cr2O3 (%) --> 0.01 Zirconium as ZrO2 (%) --> 0.04 Hafnium as HfO2 (%) --> 0.00 Sulphur as SO3 (%) --> 0.00 Strontium as SrO (%) --> 0.01 Loss on Ignition (%) (@1025C) --> 9.1 MOISTURE CONTENT (%) --> 28 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200�°C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200�°C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025�°C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
Warm greetings from Modkha Marine Sdn. Bhd., Malaysia. We, Modkha Marine Sdn. Bhd. has more than 7 years experience as a global supplier of high-quality ball clay. We are the direct supplier, hence buying from us means you will have great cost-saving for your material sourcing. To give you a brief idea, our production capacity for a month is roughly around 50,000 MT for raw ball clay and our main exports were to Asian countries as well as the European region. Our payment terms are Letter of Credit (L/C) and Telegraphic Transfer (TT). We also provide a variety of delivery terms, including FOB, CFR and CIF. For packaging, we prefer loose bulk. Below are our Semi Plastic Ball Clay Specification: DRY MOR (kg/cm2) -> 37.73 Fired MOR (Kg/cm2) -> 292.66 Green MOR (Kg/cm2) -> 17.34 Fired Shrinkage (%) (@1200C) -> 9.7 Dry Shrinkage (%) -> -0.1 Water Absorption (%) (@1200C) -> 7.3 FlRED COLOUR L Value -> 85.70 a Value -> 2.2 b Value -> 10.4 WI=Whiteness index -> 17.7 Fire resistance� -> 1580 �°C CHEMICAL ANALYSIS USIING XRF Silica as SiO2 (%) -> 47.63 Aluminium as A2O3 (%) -> 34.88 Titanium as TiO2 (%) -> 0.77 Iron as Fe2O3 (%) -> 1.29 Sodium as Na2O (%) -> 0.06 Potassium as K2O (%) -> 1.65 Calcium as Cao (%) -> 0.14 Magnesium as MgO (%) -> 0.20 Phosphorus as P2O5 (%) -> 0.16 Manganese as MnO (%) -> 0.02 Chromium as Cr2O3 (%) -> 0.01 Zirconium as ZrO2 (%) -> 0.03 Hafnium as HfO2 (%) -> 0.01 Sulphur as SO3 (%) -> 0.01 Loss on Ignition (%) (@1025 C) -> 12.4 MOISTURE CONTENT (%) -> 28 - 32
