Property Specification Density @ 15 C 775 - 840 kg/m Flash Point Minimum 38C Freezing Point Maximum -47C Viscosity @ -20C Maximum 8.0 mm/s (cSt) Smoke Point Minimum 25 mm Aromatics Content Maximum 25% by volume Sulfur Content Maximum 300 mg/kg Hydrogen Content Minimum 13.4% by mass Total Acidity Maximum 0.015 mg KOH/g Electrical Conductivity 50 - 600 pS/m (if required) Lubricity (BOCLE) Minimum 0.85 mm Thermal Stability (JFTOT) Minimum 260�°C (Filter Pressure Differential: Maximum 25 mm Hg) Water Content Maximum 70 mg/kg
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
* Quantity MIN 1,000,000 Barrels x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
QUOTATION FOR AVIATION FUEL JET A1 QUANTITY: 1,000,000BBL and above DELIVERY TERMS: CIF, TTO, FOB TERMS AND CONDITION Delivery: CIF, FOB, TTO Origin: Kazakhstan Inspection: Quality and Quantity inspection will Be Conducted at the Loading Port by SGS or equivalent Payment Method: DLC MT 700/ 760 /SBLC MT700/760 / MT103, TT wire. Shipment Method: Via Pipeline, Tanker Vessel, Bulk, Truck, and Rail Way Delivery Port: Any Safe World Port of Buyer Choice.
Jet A1 Aviation fuel
AVIATION COLONIAL TURBINE JET FUEL A1 (JET A1) Jet A1 Product Description - Aviation Fuel Quantity: Minimum: 1,000,000 BBLS. Maximum: 10,000,000 BBLS FOB Price: $99 Gross /$99 USD net per barrel Net 42 gallons (159 liters) a barrel of JET-A1 fuel CIF Price: $99 gross / $99 USD net per barrel 42-gallon (159-liter) Product description Basic Features/Special Features: Jet A1 fuel is produced for use in gas turbine aircraft engines. It is obtained as a result of distillation of crude oil at temperatures between 150 �ºC - 270 �ºC. Its freezing point is 47�ºC and its flash point is 38�ºC. It is straw yellow in color and has a clear appearance. The quality of our product is 1st class Product origin - Fuel is one of the world's leading oil refineries PAYMENT TERMS: FOB / CIF / TT payment Freight Passengers: FOB or CIF CF / LC is ok for us but CiF/ LC should be Mixed Payment Sighy CF/ L/C ie pay 50% of shipping and handling cost after LC is opened and then balance payment Upload shipping files to your bank. We can ship anywhere in the world. Products are ready for delivery in our warehouse. Please contact me/us to get a quick response and proceed with your order, keep supporting you. DELIVERY: The day after order confirmed and confirmed Target Price: Sales are made at the price you set. set your price Your Target Price: Negotiable
Cif Contract Procedures a 1 the Buyer Issues the Purchase Order After Receiving the Soft Quotation From the Seller 2 the Seller Issues the Draft Sales Agreement and Contract 3 the Buyer Signs the Sales Agreement and Contract 4 the Seller Issues the Readiness to Inject and Udta With Atv Atsc to Buyer 5the Seller Shall Send the Legalized Contract and the Following Pop Documents to the Buyer as Follows 51 Certificate of Origin 52 Supply Commitment 53 Product Passport 54 Product Availability Statement 55 Export License 5 the Buyer Shall Deposit 1 of the Total Value of the Goods Into Seller Designated Fiduciary Bank Account as the Security Deposit The Buyer the Seller Shall Sign the Refund Agreement The Payment for Goods Will Be Deducted From the Total Product Value at the Discharge Port 6 the Seller Shall Commence Shipment of the Goods and Provide Complete Pop Documents to the Buyer via Email and Hard Copies Will Be Sent From Sellers Bank to Buyers Bank via Courier on the Sellers Expenses Ttm Will Be Held in Buyers Designated Safe Location Upon Buyers Request 81 product Distribution Export License 82 assign Ownership Certificate 83 transneft Contract for Transporting Products to the Loading Port 84port Storage Agreement 85charter Party Agreement for the Transportation of Products to the Port of Discharge Tank Receipt 87 Sgs Quality and Quantity Certificate 88 Landing Order 89 Prevalued Commercial Invoice 810 Noreta 810 Nor Eta Readiness Notice Shipping Date Notice 81 1 Dip Authorization Test Letter 812 The Power of Attorney Given by the Shipping Company to the Shipping Agency Company at the Port of Destination and the Ship Information Documents Necessary for Maritime Reporting Submitted by the Captain of the Ship at the Anchorage of the Port of Destination on Time 813 Ship Questionnaire 88 814power of Attorney Authorizing Sales and Collecting Payment for Goods 9 at the Beginning of Shipment When the Tanker Arrives at the Unloading Port the Buyer Shall Refer the Ship to the Chinese Customs for Approval Upon Successful Customs Approval The Seller Shall Unload the Oil Products Into China Bonded Warehouse the Buyer Shall Conduct Ciq Inspection and the Buyer Shall Pay All the Remaining Payment Through Tt Telegraphic Transfer or Mt103 Within 72120 Hours 10 After the Buyer Pays the Full Payment the Seller Shall Hand Over the Hard Copies of the Original Pop Document Cargo Right Document to the Buyer
Jet A1 Fuel. Non Sanctioned Non Russian Location: Rotterdam
Jet fuel or aviation turbine fuel is designed for use in aircraft powered by gas turbine engines. The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification.
