Sanitary valves Reference standards: iso, gb, din, idf, 3a, hgj, sh, jb, qb, ansi Conform to gmp and fda requirements. Diameter range: dn6-200mm Flow direction: straight, three-way and multi-way Drive type: electric, pneumatic and manual Sealing materials: silicon rubber, edible non-toxic rubber, ptef Connecting types: ferrule quick-install, iso/sms/din thread (british System/metric system), flange and welding. Surface treatment: mirror polishing, lusterless treatment, acid pickling Material: aisi316l or aisi304 For detail data, please refer to "a handbook of pipe fittings pipelines Common specifications: 19.5, 25.4, 31.8, 38.1, 45, 50.8, 57, 63.5, 76.1, 88.9, 101.6, 108, 114.3, 133, 159, 219 Wall thickness:1.2mmó1.5mmó2mmó2.5mm Maximum working pressure: n0.98mpa, pipe length: 4-6 m/piece Stainless steel seamless pipe adopts gb/t14976-94 standard, stainless steel welded tube adopts gb/12771-91 standard. 19.5, 25.4, 31.8, 38.1, 45, 50.8, 57, 63.5, 76.1, 88.9, 101.6, 108, 114.3, 133, 159, 219
Sanitary valves, pipes and fittings Sanitary valves, pipes and fittings
Sanitary ball valve for food and chemical use with iso mount plate weld / male end locking device can be required. 100 percent air tested under water at 100 psi open and closed positionsstandard end: weld amp clamp end other sms. Din. Rjt. Idf male / male can be required.Specifications:size :1/2 quot ~ 4 quotfeatures:material: astm-cf8m a351seal(gasket): ptfe (teflon)size: 1/2hydrostatic test pressure 1/4 Each pc by shrink, 120pcs per carton, finally into plywood box
Stainless steel sanitary diaphragm valve The diaphragm valve is widely used for pharmaceutical industries. This valve is widely used for controlling flow rate. Features: Valve body which contacts with liquid is made of ss316l. The non-contacting part is made of ss304 material. Valve body type: two way mirror type, two way sand blasting type, three way, u type, t type Gasket: silicone, epdm, epdm+ptfe integrated membrane , epdm/ptfe seperate membrane Integrated membrane Max. Pressure: 10bar Max. Temperature: -10 ~ +120 degree Material quality: ss 316l Inside surface finish: ra0.4 Standard: din, sms Connection: welded, clamped, flanged, Size: Mini type: dn6, dn8, dn10, Medium type: dn15-dn50 Large type: dn65, dn80, dn100 Applications: widely used for pharmaceutical and chemical industries
Pneumatic butterfly valves conbined a piston within a cylinder and our various connecting butterfly valves. They are not only developed to single effect ( air/ spring ) but also double action ( air/ air ) in case of the actuator euqip with professional control box which is designed with various options such as proximity type, micro swith type and electrovalve 1 up to 3 pcs by requested. Each per ploybag, 100pcs per carton box, then into plywood box
Our check valves are designed to prevent reverse flow. Concentric and eccentric styles as well as our tapered disk design are available for horizontal, vertical applications and are working well without leaking while getting a return pressure. Our special designed check valve can be using for many applications in such as food, dairy, beverage, pharmaceutical, chemical, and many other industries.The materials are offered for food, dairy, beverage, pharmaceutical, chemical, and many other industries.Specifications:body:ss 316. Ss304 and ss316l are required based on big volume.Fully precision machined by cnc machine.Angle design make the biggest flowing liquid as well as for disk easy open and close.Connection: clamp end, weld end, male end and female end are available from 1/2 quot, 3/4 quot up to 4 quot.Connection: weld end are available the tubing according to 3a, sms, rjt(bs), din 11851.Middle clamp designed are available from 1/2 quot, 3/4 quot up to 3 quot.Middle flange designed are available from 1/2 quot, 3/4 quot up to 4 quot.Type of ends available:3a: clamp, weld, bevel male and female are available from 1/2 quot up 4 quotsms: weld end, male and female end are available from dn25 up to dn104.Din: weld end, male and female end are available from dn28, dn34, dn52, dn70, dn85 and dn101.6, dn104.I-line: available from 1 quot up to 4 quot.Spring:stainless steel sanitary both closing design, both opening design is required.Seal ring of stem:epdm. Viton or silicon is required.Body o-ring:nbr or epdm. Viton is required.Working temperature:-10o ~ 120o (epdm seal)features:opening pressure:1/2 quot-0.09 bar3/4 quot-0.23 bar1 quot-0.75 bar1.5 quot-1.3 bar2 quot-0.44 bar2.5 quot-0.68 bar3 quot-0.33 bar4 quot-0.42 barworking pressure:open pressure as above and max. Working pressure 10 bar. Each pc by shrink, 120pcs per carton, finally in plywood box
Stainless steel sanitary manual butterfly valve Features: Valve disc is made from forging. Valve body is made from forging. Manual handle: pull handle, plastic gripper handle or stainless steel gripper handle Gasket: epdm, silicone or viton All gaskets are fda approved Max. Pressure: 16bar for welding connections; 10bar for other connections Min. Pressure:0.2bar Compact design, easy maintenance and high torque Connection end: weld, tri-clamped, union, flange, male threading, female threading Standard: din, sms, iso, 3a, idf Material: ss304, ss316l Inside surface finish: ra0.4 Size: dn20-dn300 , 3/4"-10" Standard : pull handle normally with 3position ( 4position can be customerized ) Gripper handle normally with 13 position. Application: food, beverage, dairy, pharmacy, chemical or any food processing industries
Stainless steel ball valve Dn6-dn150
Valves and automation for optimized pharmaceutical, dairy & beverage processes: “pbs-yuanan” valves ensure the highest levels of hygiene & safety. They are easy to install and maintain, & offer the lowest possible lifecycle cost. Our smart valve solution ensures optimal flow throughout process. We offer a wide range of hygienic valves, which deliver the utmost in reliability across almost every applications.
