Supplier: Magnetite 50% Min
Supplier: Magnetite 50% min
Commodity: Iron Ore 62% Fe. (basis) Magnetite Purity: 62% Fe. min. Dimension: 1 mm to 10 mm. (not pellet) the mineral moisture is 8% naturally
Supplier: Iron ore 58% 65% hematite and magnetite, manganese ore 38% 50%, coal like anthracite, bituminous, subbituminous, copper cathodes 99.997%, petroleum products, ppe like safety boots, gloves, masks, hard caps
Services: Export, fob and cif services
Buyer: Ppe products
COMMODITY: MEXICO IRON ORE 64.5% Fe (Natural, not concentrate) , REJECTION BELOW 63.5% Fe. (Lumps or Fines at buyer's choice). COUNTRY OF ORIGIN: MEXICO. QUANTITY: 150,000 MT (MOQ per shipment)(+/-5%)/month x 12 months, or.... 300,000 MT/month x 12 months, or... 1,050,000 MT/month x 12 months. (other quantities available always in multiples of 150,000 MT, which is the size of one fully-loaded vessel). CONTRACT: 12 months (with eventual rollovers and extensions for further years). QUALITY: IRON ORE 64.5%, REJECTION UNDER 63.5%. SPECIFICATIONS STANDARD INTERNATIONAL: Iron Ore to be supplied under the present contract shall conform to the specifications and standards specifically set out below: Chemical Composition (on dry basis, percentage by weight). Guaranteed: Fe 64.50% basis (Natural, not concentrated Fe2 O3 Hematite), 63.5% below rejection. SiO2: 1.90% Max. TiO2: 0.0022% Max. Al2O3: 0.06% Max. German Overseas Investments S.A. MnO: 0.011% Max. MgO: 0.365% Max. Na2O: 0.025% Max. K2O: 0.01% Max. P2O5: 0.04% Max. P: 0.0011% Max. S; 0.001% Max. CaO: 0.0850% Max. Moisture Content (Free moisture loss at 105 degrees centigrade): Guaranteed 8.00% Max. Physical size max. 10 mm. Physical Specification (Natural Basis): LUMP Nominal 50 mm - 90% min. as a load basis set by seller. Physical Specification (Natural Basis): FINES Buyer sets the size, normally either 10mm or less or 3 mm or less. Guaranteed Below 3.0 mm , 1 mm 80% min as a load basis set by seller.
1. Sinter ore for a metallurgical plant. Specifications: Quantity : min 3 000 tons/month. Delivery conditions : FCA, DAP, FOB, EXW Fraction : 0-10 mm. Sinter ore with Fe Content 45-50% (on delivery terms of FOB Black Sea) Sinter ore with Fe Content 55-59% (on delivery terms of FOB Black Sea) Test report of iron-containing raw materials No.1: Fe total - 46,21%, Fe2O3 - 65,2%, SiO2 - 31,98%, Al2O3 - 0,92%, P - 0,043%, FeO - 0,77%, CaO - 0,14%, MgO - 0,21%, TiO2 - 0,033%, MnO - 0,009%, S - 0,027%, Insoluble residue - 0,93%. No.2: Fe total - 50,56 %, Fe2O3 - 71,28%, SiO2 - 25,6%, Al2O3 - 1,05%, P - 0,039%, FeO - 0,90%, CaO - 0,17%, MgO - 0,14%, , TiO2 - 0,038%, MnO - 0,016%, S - 0,025%, Insoluble residue - 0,98%. No.3: Fe total - 55,49 %, Fe2O3 - 78,33%, SiO2 - 18,98%, Al2O3 - 0,80%, P - 0,045%, FeO - 0,90%, CaO - 0,13%, MgO - 0,21%, , TiO2 - 0,030%, MnO - 0,013%, S - 0,012%, Insoluble residue - 0,82%. No.3: Fe total - 59,84 %, Fe2O3 - 84,83%, SiO2 - 12,96%, Al2O3 - 0,65%, P - 0,055%, FeO - 0,64%, CaO - 0,11%, MgO - 0,17%, , TiO2 - 0,029%, MnO - 0,011%, S - 0,009%, Insoluble residue - 0,76%. Note: the chemical composition is given for reference and is not defective, with the exception of iron and is given for information.
