Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
Acid / Alkali Resistant Tiles/Bricks * Our Acid proof tiles, Acid alkali resistant tiles, Chemical resistant tiles are fully vitrified tiles which are manufactured using special non ferrous clay, processed at extremely high temperatures this process causes the raw materials to fuse and form a compact mass with an extremely low water absorption of less than 0.5% resulting in the formation of a very strong body with a flexural strength of 38 N/mm2, solid through color fade proof with a very hard surface Mohs hardness of 7. * The acid resistant tiles come in a range of sizes and thicknesses from ranging from 8-25mm. Our acid proof tiles meet stringent specification norms of IS 4457:2007 and relevant ASTM/DIN standards which ensure excellent performance in Acid/Alkali/Chemical (expect Hydrofluoric acid and its derivatives). Corrosion Protection Applications * Factory Floors subject to corrosion from Chemicals, Acids, Oil & Solvents * Pickling tank and surrounding areas * Food & Beverage Industry flooring * Battery rooms and Control rooms * Demineralization plants * Walls of washing and Paint shop areas * Acid Resistant Tiles Manufacturers India * Our acid proof tiles provide excellent abrasion resistance, anti-skid properties for worker safety and high aesthetic appeal. We also provide specialized corner tiles for reducing chances for acid attack through construction joints. Our standard sizes are 200x100, 200x200 & 300x300 millimeters.
Product name - Steel Grating Finish - Hot galvanized ,Paint, Untreatment (black/slef color) Weld way Automatic pressure resistance welding Usage - Industrial platform, Corridor laying, Ditch cover plate, Fence, etc Thickness - 3-10mm Bearing bar pitch - 20mm 30mm 40mm Cross bar pitch - 50mm 100mm Style - Plain sheet, Serrated sheet, I type sheet
Grinding, blasting, and cutting processes, as well as the production of refractory materials, all employ alumina. We are proud to be the world's largest fused alumina producer and supplier. It is also known as fused aluminium oxide Alumina is found in the regions of Odisha, West Bengal, Kerala, Uttar Pradesh, Maharashtra and Tamil Nadu. There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness. Alumina, or aluminium oxide (aluminum oxide), is better known in the mineral world as corundum with the chemical formula Al2O3 Alumina has widespread usage in several industries in refractories, sandblasting and abrasives to mention a few. Grinding, machining, blasting, cutting, and the manufacturing of shaped and unshaped refractory materials all employ fused aluminium oxide grits. We offer innovative, brilliant quality alumina mineral with both macro and micro sized that could be used for a wide range of applications. We can add refining procedures to our regular production of alumina mineral to suit the bespoke requirements of various industries and application domains. These various industries are ceramics, sand casting, tiles, enamels, laminates & paints, industrial coatings, abrasives, blasting, concrete & resin components, refractories, insulators and heat conductive to name a few.
Wollastonite Wollastonite is one of the most versatile minerals. It is a naturally found mineral that is a mixture of calcium, silicon and oxygen. However, it is majorly found in the regions of Rajasthan, Gujarat and some parts of Tamil Nadu in India The physical properties of Wollastonite include an eclectic needle looking structure which is high in brightness and has superior tones of white. It also has low moisture, oil-absorbing and high thermal stability with less solubility in water. It is low in volatility and has a high melting temperature. Wollastonite has medium hardness with rank of 4.5 on Mohâ??s scale. All of these properties make it an excellent and versatile mineral to be used in industries like plastics, paints, ceramics, construction and adhesives to mention a few. We have majorly focused our supply of Wollastonite mineral on its high-end applications in the ceramics, paints and plastics industries. Within the sphere of the plastics industry, it is a brilliant and less-expensive mineral substitute for fiberglass, carbon fiber and synthetic minerals. It is very much popular in automobile industries, as it can enhance the strength, dimensional stability, and influence resistance of car parts, aiding the manufacturers with lighter parts. Wollastonite is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium. It's often used in electronic equipment like connectors and computer housings because of its great insulating and fire-resistant qualities. Wollastonite mineral is customized to meet the needs of our clients' industries. Our wollastonite is anti-corrosion mineral that is ideal for paints and coatings sector. Wollastonite can improve the fire strength of ceramic tiles and sanitary ware, as well as reduce cracking and glazing faults, for ceramic manufacturers. Our Wollastonite is an excellent reinforcing filler for cement boards and fire-insulating boards in the building industry. Aryan Tiles is confident in the quality of its Wollastonite minerals. Wollastonite has proven to be the most adaptable material used in various key sectors, and the market for it is constantly expanding.
Dolomite is a mineral that is usually found in dolostone deposits, which are sedimentary rocks. Its applications are driven by the intrinsic distinctions between dolomite and calcite It is a versatile mineral that is used across several industries such as construction, agriculture, ceramics, pharmaceuticals, paints, plastics, rubber and refractories to mention a few. The physical properties of dolomite are its soft to medium hardness with a value of 3 and 4 on the Mohs scale and the pearly luster. Dolomite is used as a source of magnesium in ceramic, glass, cement and pharmaceutical sectors. In the Iron and steel industries, dolomite is massively used because of its strength and compatibility in purifying iron and steel. For construction and building materials, it is used as a substitute for lime. Sodium triphosphate (STP), also sodium tripolyphosphate (STPP), or tripolyphosphate (TPP), is an inorganic compound with formula Na5P3O10. The burnt dolomite is used in refractories, as a sintering agent in the palletization of iron ore and as a flux agent in the production of steel. Paints, plastics, rubber, soaps, and detergents sectors use it as filler in their manufacturing processes. Farmers use dolomite to adjust the pH of their crops. It is also used in the chemical industry to make magnesium salts such as magnesia and magnesium oxide (MgO), which is further utilised in pharmaceuticals. The distinguishing characteristics of our natural dolomite are: High purity grade along with whiteness. Our Dolomite has high compressive and shear strength. It also has the wet ability and fire-resistant. The strength of our mineral dolomite is its long life and rigidity. The structure of dolomite is like that of calcite, except every other cation layer contains magnesium ions instead of calcium ions. But, if we compare dolomite to calcite, its usage will be less prevalent within the industries. This is because of the lack of brightness in the dolomite mineral. We provide cutting-edge and high grade dolomite minerals that can be used in a variety of applications. In order to meet all diverse demands, we can add additional refining operations to our standard dolomite mineral production to suit the bespoke requirements of various sectors and industries.
Kaolinite is the mineral that is derived from the rock called â??Kaolinâ?? and from there, it gets its name. It is also commonly known as â??China Clayâ??. Kaolin is mined from the regions of Gujarat, Rajasthan, Kerala, West Bengal and Jharkhand in India The physical properties of Kaolin include high brightness, non-abrasiveness, poor conductivity of heat and electricity and it has naturally fine particles. Kaolin remains white after calcination due to its refractory properties and can be easily dispersed in water. There are several variations within Kaolin such as Hydrous Kaolin, Metakaolin and Calcined Kaolin. We offer a vast range of Kaolin-based minerals to several businesses from paper manufacturing to porcelain tableware, paints, cosmetics, packaging, rubber and pharmaceuticals to name a few. We customize our minerals according to the needs of the industry of our clients. Hydrous Kaolin has fine particles with plate-like shapes and inertness in terms of chemical reactivity, whereas, Metakaolin is created by the process of calcination of Kaolin. It is a white mineral additive which is most popularly used in cement-based products. In contrast to this, Calcined Kaolin is manufactured by heating the finest natural kaolin to high temperatures in a kiln. This calcination process changes the size and shape of the particles, enhances the whiteness and hardness of the mineral and improves its electrical conductivity. Kaolinite is a clay mineral, with the chemical composition Alâ??Siâ??Oâ??(OH)â?? Various Industrial Usages: Kaolin is a very important mineral in the ceramics industry. Itâ??s high fusion temperature and white firing characteristic makes it perfect to be used in the manufacture of sanitaryware, tableware, floors & tiles and refractories. In the construction industry, kaolin is used to enhance the mechanical properties, porosity and look of several types of cement and concrete. It is also an impeccable source of alumina source in the manufacturing of fiberglass. Kaolin is used in paper manufacturing and fiber-based packaging also. Our Kaolin mineral enhances surface functionality when it is used as fillers or coating pigments and thus further helping in reducing the manufacturing cost of the paper or the packaging. Moreover, it is extensively used in decorative paints formulations as it is a natural opacifier and it is the perfect mineral when high gloss is required. Our specialized Kaolin also can be used as multi-purpose fillers to improve the performance of adhesives, plastics and rubber. We are extremely confident in our offering of Kaolin mineral as we understand how Kaolin can optimize the performance, reduce the costs and can achieve minimum carbon footprint in our clientâ??s end products