With superior strength and corrosion resistance casing panels from fiberglass composites offer premium performance for end users. Providing long service life, the high quality, FRP materials deliver significant life cycle cost savings. 1) Superior Fiberglass Strength Longer Spans & Low Cost Installation Fiberglass reinforced plastic panels are much stronger than PVC or chopped strand casing. With high content of continuous glass fiber reinforcements, 35% by weight, aligned for optimum performance, the panels have superior strength and stiffness. This results in longer span capability and lower cost installation. 2) Corrosion Resistance + UV Protection Long Service Life & No Maintenance Fiberglass materials do not corrode in wet or tough industrial conditions. Its premium, UV stabilized polyester resin ensures long service life and extended retention of aesthetic properties. Technical Strength: 1) Concept Design 2) Material selection 3) Process determination 4) Model processing 5) Mold design 6) Reverse Engineering Process Technique: Hand lay-up, L-RTM, SMC, etc
Agriplast Protected Cultivation Private Limited introduces the new generation of polymer material and cross-linked space technology, with the advantages of good absorption, water-proof, fast diffusion, anti-mildew, high efficiency and long service time. It is good to adjust room temperature. 1. Large evaporation surface area, excellent permeability can guarantee the water evenly wet the wall, cooling efficiency up to 85%. 2. Does not contain surfactants, natural water absorption and fast diffusion and good performance. Only 4-5 seconds to complete a drop of water diffusion. 3. Natural water absorption is 60-70mm/5min or 200mm/1.5h. 4. Special ripper process, high strength, no distortion and more durable. 5. Specific solid apace structure, providing maximum evaporator surface for water and air thermal exchange. 6. The corrosion resistance cooling pad also has the function of ventilation and air cleaning. 7. It is an excellent filter, non-toxic humidifier, oxygen cooling environmentally friendly materials. 8. It also does air purification and filtration media Agriplast cooling fan & pad has the features of easy installation, nontoxic and security, economic and energy-saving, green and environmental protection.
Cooling fan 80mm*80mm*25mm
1. Product imformation Chemical Name: N,2,3-Trimethyl-2-isopropylamide CAS No.: 51115-67-4 MF: C10H21NO MW: 171.28 Appearance: White crystal powder Odor: Mild cooling, slight menthol odor (almost odorless) Detection Method: HPLC Purity: â?¥99% Melting Point: 58ºC-61ºC Flash Point: >100 Water Solubility: Insoluble EINECS No.: 256-974-4 FEMA No.: 3804 Shelf Life: 2 years 2. Cooling agent ws-23 for throat lozenges: 1). ws-23 for throat lozenges, Its throat effect is excellent, suitable for people affected by harsh environment; 2). ws-23 in throat lozenges, Appropriate consumption can be refreshing; 3). ws-23 in throat lozenges has anti-inflammatory effect and can repair minute throat damage in time; 4). ws-23 for throat lozenges Can effectively relieve fatigue of the throat. 3. Cooling agent WS-23 Usage amount: xian Taima cooling additivefor throat lozenges cooling agent ws23 1).can fully diluted in Vegetable glycerin, then add it in the products you need, Mix ratio: 0.03-0.1%. 2).Water solubleï¼? 0.1% If use water to dilute, 1g ws-23+ at least 1000g water, that case can be fully dissolved, then add it in the products you need, Mix ratio: 0.03-0.1%. 3). can directly be used in Sugar liquid or liquid flavors, Mix ratio: 0.03-0.1%. 4). can fully be diluted in alcohol
Size: 40x40x10mm Frame: plastic Impeller: plastic p. B. T. Voltage: 5v, 12v, 24v Current: 0.04-0.18a Power: 0.45-1.44w Speed: 4400-7700rpm Air flow: 4.3-7.6cfm Pressure: 1.9-6.1(mmh2o) Noise: 22-37dba Bear type: sleeve, ball Weight: 16g Motor: brushless dc, auto restart impedance & polarity protected Operation temperature: -20 c~80 c Insulation resistance: 10m at 500vdc between lead and frame Dielectric strength: 1 min at 500vac/50-60hz, current min 5ma Operation humidity: 20%~85% Working voltage: rated voltage15% Life at 25oc: ball bearing 50, 000hr and sleeve bearing 30, 000hr
Size: 60x60x15mm Frame: plastic Impeller: plastic p. B. T. Voltage: 12v Current: 0.11-0.23a Power: 1.08-1.56w Speed: 2700-4000rpm Air flow: 12.4-19cfm Pressure: 1.6-3.1(mmh2o) Noise: 23.5-33.9dba Bear type: sleeve, ball Weight: 30g Motor: brushless dc, auto restart impedance & polarity protected Operation temperature: -20 c~80 c Insulation resistance: 10mat 500vdc between lead and frame Dielectric strength: 1 min at 500vac/50-60hz, current min 5ma Operation humidity: 20%~85% Working voltage: rated voltage 15% Life at 25oc: ball bearing 50, 000hr and sleeve bearing 30, 000hr
Universal cooling fan, auto radiator fan 7"/9"/10"/12"/14"/16" 80W 120W 160W 250W CURVED OR STRAIGHT BLADE Specifications Quality Warranty: 1 year 100% test before delivery Good Quality, Best Price, Prompt Delivery ISO9001 / TS16949
A Fitzer Incorporation in this domain engaged in presenting a wide range of HVAC Coil. The offered coil facilities are equipped with air velocity at the outlet of terminal filtration unit and filters. In addition, our given coil can be availed from us on numerous customised options in given time. Features Advanced technological devices High-performing Easy to maintain Applications Exhibition center Auditoriums Factories Specifications We offer these coils with a row deep of 2, 4, 6, 8 & 10 Row deep Fins spacing 5 to 12 FPI The thickness of tube 0.3-0.6 mm. Copper pipes with diameter (3/8â??, 1/2", 5/8â??) are used
Model No. LLD-S01 Remote Control Without Remote Control Power Source Battery Material Plastic Installation Table Certification ROHS, CE Unit Weight 929g Colour White Battery Capacity 4000mAh Wind Speed 3 Gears Water Volume 220ml Timer 8h Remove Angle 120 Degree Charge Port Type C Trademark No Transport Package Carton Specification 162*167*197mm Origin SZ,China
