Air flter for power generation installation and air conditioning systems.
Supplier: Environmental equipment, aviation parts, technology equipment
Lovely animal design, fashionable and attractive appearance Using high-frequency ultrasonic oscillation to obtain 1-5 Micron water particles Built-in negative ion generator to improve air quality Advanced noise control design, super quiet when operating Transparent water tank to ensure the water level is visible Adjustable moisture level 12 hours continuous quiet operation Indicator light when water runs out Auto shut-off when water runs out for additional safety Ideal for personal and baby care or promotional gift for air conditioner Bring relaxing essence and comfortable moisture to benefit your health Specifications: Capacity: 4L Voltage: 220V Frequency: 50Hz Power: 35W
Supplier: Industrial Air Pollution Control Equipment , Structural Steel Fabrication Works, Ma/pp/frp/ss/pvc Storage And Process Tanks
Buyer: Automobile , Process, Chemical , Fabeication Industries
Reinforced Frame: Strong structure for outdoor movement. Water Tank: Work without constant water supply. Rotational Fan: Horn-shape fan concentrates the air flow. Adjustable wind velocity and height enlarge the working area for different environments. Float Valve: Automatic water supply controller inside the water tank. Drought Switch: Automatic shutdown and alarm to protect the pump when water tank is dried out. Overload Protector: Automatic shutdown to prevent damage of motor when current is overloaded. TEFC Pump Motor: Totally enclosed motor ensures electric safety from moisture. TEFC Fan Motor: Totally enclosed motor prevents danger caused by moisture. Model: Air-16L Output: 5 nozzles Pressure: 1000 PSI (70 BAR) Horsepower: 1/3 HP 18' rotating fan (3 speed) Dual filtration system Voltage: 110V/60Hz; 220V-50Hz/60Hz RPM: 1450 / 1750 Dimension: 78 x 63 x 157~208 CM Weight: 58 KG
Reinforced Frame: Strong structure for outdoor movement. Water Tank: Work without constant water supply. Rotational Fan: Horn-shape fan concentrates the air flow. Adjustable wind velocity and height enlarge the working area for different environments. Float Valve: Automatic water supply controller inside the water tank. Drought Switch: Automatic shutdown and alarm to protect the pump when water tank is dried out. Overload Protector: Automatic shutdown to prevent damage of motor when current is overloaded. TEFC Pump Motor: Totally enclosed motor ensures electric safety from moisture. TEFC Fan Motor: Totally enclosed motor prevents danger caused by moisture. Model: Air-16L Output: 5 nozzles Pressure: 1000 PSI (70 BAR) Horsepower: 1/3 HP 18' rotating fan (3 speed) Dual filtration system Voltage: 110V/60Hz; 220V-50Hz/60Hz RPM: 1450 / 1750 Dimension: 78 x 63 x 157~208 CM Weight: 58 KG
Clearwater sc is a flocculant or water cleanser for organic wastes. Biodegradable inorganic product. Designed to flocculate and revitalize water as well as at the same time remove odor. Variations available: I) Marine floc - for use in aquaculture and the treatment of algae. II) Pollution floc - a pollution destroying agent ideally suited for industrial use. III) Poolfloc - a flocculant for the shock treatment of green pools. Benefits: I) Odor control II) Reduction of bod and cod levels III) Reduction of bacteria levels IV) Co-agulation of fats and oils for removal or re-use V) Dropping organic and inorganic materials out of suspension VI) Enabling cleansed water to be recycled or discharged safely VII) Reduction of discharge costs. Available in convenient tablet form. Does not contain chlorine, strong acids or any other chemical. 2.5 kg plastic jar with screw lid. 10.0 kg plastic bucket with snap lid. No minimum order quantity.
Product Feature The TS-36P utilizes high-power pulse-jet engine to producing a high output of dense heavy thremal fog for control of virus or flying insects such as mosquito, gnats, house flies, sand flies and black flies. 1. It can be disassembled withour extra instrument, it's easier of maintenace. 2. Fogging tube is eqipped with two-stage cooling system. This technology will greatly lower the temperature of the fogging tube and combustion chamber. 3. High-work-efficiency, economical, the penetration and clinging of the fog is well. 4. Most light in weight and with compact dimensions,it is easy of opearation. 5. Adopting refactory stainless steel to making the fogging tube, it will maintain its natural color and sharp in the whole years of its lifespan. 6. Equipped with 4x1.5 dry battery power supply to assure greater reliability. 7. Equipped with automic ignition system to assure ease of start-up the engine. 8. The adjusting knob of the oil nozzle has scalar, ease of operation. 9. could choose the auto-cut solution valve. In case of engine flameout, ensure it is safe to operator. 10. could choose the automatic ignition system of the air-pump, you only need to push down the start button, the machine will start-up immediately. Product Specification/Models 1. weight, empty in kg. approx: 8.1 2. deminsions in mm(LxMxH): 1375x290x360 3. weight, empty in kg. approx(shipping data): 13.1 4. deminsions in mm(LxMxH)(shipping data): 1270x310x370 5. solution tank capacity in L: 7 6. fuel tank capacity in L: 1.5 7. fuel consumption in L/H, approx: 1.5 8. performance of combustion chamber in KW/HP: 18.5/25.15 9. maxinium flow rate in L/H: 42 10. flow rate of oil in L/H, approx: 8~42 11. energy: 4x1.5V batteries 12. pressure in the solution tank in bar, approx: 0.25 13. pressure in the oil tank in bar, approx: 0.06
About Lead Refining Lead recycled from used lead acid batteries or other sources (Secondary Smelting) via the Mini Blast Furnace or Rotary Furnace route, contains lot of contamination and undesired components. On the other hand, Lead required for battery manufacturing is either soft Lead with 99.97% purity or hard Lead of varying Antimony compositions. In order to make quality of lead suitable for its different uses, different variations of pot melting processes are employed. These include Re-Melting for removal of slag, Refining” for attaining required purity levels and Alloying for producing various alloys of lead. The equipments used are the same, the consumables and the processes, however, differ. Description of Melting Pot The Melting Pot (or Refining Pot or Alloying Pot, as it is variously called), is a mechanical mixing device with a pot and a heating arrangement. The inner pot is made of heavy MS plate with dish end bottom. It is placed within a jacket of refractory bricks, which in turn, are protected by an outer cover of MS plate with reinforcements. The pot is covered at the top with opening for feeding lead ingots and is provided with an electro-mechanical mixer. At the bottom, a heating source, usually an oil fired burner, is provided to heat the pot and to melt the lead. Once lead melts, impurities are skimmed and removed and any consumables required are added. Lead is then drained from the pot through an outlet pipe and valve. Capacity of such pots depends upon the requirements of particular units. Standard pot capacities made are from 4.0 TpB to 20.0 TpB. Higher capacity pots are also manufactured as required by any particular establishment. A typical 10.0 TpB Refining Pot has the following standard sizes and specifications: Diameter (ID) 1150mm Height 1250mm (Dish Depth of 200mm) Flange Width 350mm Outer Shell Diameter 1900mm Stirrer MoC & Dia SS-304 & 75mm Stirrer Motor 5.0 HP x 960 RPM Outlet Valve Size 40mm Burner Diesel Fired Fuel Consumption Range 8-18kg ltr Melting pots are installed both with and without accessories which may include Ingot Casting Machine, Ball Making Machine (where Ball Mills are installed down the line), Air Pollution Control Systems, Jib Cranes etc. Production Process Melting Processes have been grouped as Re-Melting Process Refining Process Alloying Process Re-Melting Process This process is undertaken for value addition to the recycled lead from furnaces. Lead is melted in the pot and major impurities are skimmed from it to make it saleable in the market. Refining Process Lead is melted in the pot, additives such as Sulphur, Wooden Powder and Coke Breeze are added and mixed gently followed by dross removal. Thereafter, Tin is added to remove Copper and temperature is increased to 550-6000C. Further, additives such as Sodium Nitrate & Caustic Soda are added to remove Antimony. This process is repeated to get the desired purity of lead. Alloying Process Lead is melted in the pot, additives such as Sulphur, Wooden Powder & Coke Breeze are added and mixed gently followed by dross removal. Thereafter, Tin & Antimony are added to the liquid metal to get the desired grade of Lead. Air Pollution Control Device for Refining Pot Melting processes lead to generation of air pollution at the following stages Initial heating and melting generates fumes Drossing with sulphur, wooden powder and coke breeze generates lot of smoke and dust particles Further heating for Refining and Alloying with different chemicals generates fumes and dust particles. Hence, to meet various goals of maintaining employees' health, factory environments as well as regulatory requirements, it becomes imperative to get high end Air Pollution Control Systems to be installed with the Melting Pots. Air Pollution Control Device for Refining Pot Dust : 500-600 mg/Nm Temperature : 60-80C G Gases : Fumes and Dust Discharge Characteristics required as per Norms Dust : Less than 50 mg/Nm Lead ( Pb) : Less than 10 mg/Nm Temperature : 50-60 C Gases : Not Detectable Selection of Technology for Air Pollution Control Based on the Parameters and the Standards mentioned, the following technology is adopted for Air Pollution Control System in Melting Pot: Pulse Jet based Bag House Filtration System Details of Air Pollution Control Device with functions Aerodynamically designed suction hoods are provided to capture flue gases generated at source itself. Duct & Bends Ducts and bends are required to convey flue gases from point of suction to final top of the chimney and connect various equipments like suction hood, bag house, ID fan and chimney. All bends and reducers are aerodynamically designed and have provision of manhole cleaning mechanism. Bag Filtration System: It is used for final filtration of flue gases to remove fine dust particulate matter using Pulse Jet Technology. Treated gases from all the bags are collected at top of bag house and passed through ID Fan to exhaust the same to chimney. The dust is collected at bottom of hopper and is discharged through Rotary Air Lock Valve. Bag Filtration System It is used for final filtration of flue gases to remove fine dust particulate matter using Pulse Jet Technology. Treated gases from all the bags are collected at top of bag house and passed through the ID Fan to exhaust the same through chimney. The dust is collected at bottom of hopper and is discharged through Rotary Air Lock Valve. ID Fan ID Fan provides necessary driving force to convey flue gases from top of furnace to top of the chimney. The volume sucked overcome the total resistance offered by equipment and duct with the help of fluid horse power provided by ID Fan driven by suitable motor. Stack (Chimney) The generated gases are passed to atmosphere after treatment through chimney of suitable height and diameter. At the time of Delivery