Description CY9006 is a low cost, highly integrated 2.4GHZ wireless Line transceiver chip. The chip integrated transmitter, receiver, frequency synthesizer, and GFSK modem. The peripheral circuit is simple and only needs to be matched with MCU and a few peripheral passive devices. CY9006 transmits GFSK signal, and the maximum transmit power can reach 6dBm. The receiver adopts a low-IF structure, and the receiving sensitivity can reach -87dBm. The digital channel energy detection can monitor the channel quality at any time. The on-chip transmit and receive FIFO registers can communicate with the MCU, store data, and then transmit over the air at a 1Mbps data rate. It has built-in CRC, FEC, auto-ack and retransmission mechanisms, which can greatly simplify system design and optimize the performance. In order to improve the battery life, the chip reduces the power consumption in each link. The minimum operating voltage of the chip can reach 1.9V, and the minimum current is 1uA under the condition of holding the register value. Features Single-chip solution including RF front-end and digital baseband. Support frequency hopping Support SPI and I2C interface Built-in auto_ack function Data rate 1Mbps Very low power consumption Support signal energy detection Support SSOP16 and TSSOP16 packages APPLICATIONS Remote control Wireless keyboard and mouse Wireless networking Smart home Industrial and commercial short-range communications IP phones, cordless phones Intercommunication between machines
New JC V1SE Dot projector board supports iPhone X-14 Pro Max. New JCID V1SE Dot matrix board for iPhone X-14 PRO MAX Face ID repair. JC V1SE Dot projector detection board for repairing iPhone Face ID move higher or lower problem. JC V1S Dot projector Face ID repair board is used for detecting the iPhone dot projector flex cable, read and write the data for new dot matrix flex cable. Option: 1. JC Face ID dot projector board for iPhone X-14 Pro MAX(New version), works with new JCID non-removal FPC Face ID repair flex cable(without soldering). 2. JC Face ID dot projector board for iPhone X-13 Pro MAX(New version), works with new JCID Face ID repair flex cable(old version). Features: 1. JC V1SE Dot Projector Detection Board for iPhone X/XS/XS MAX/XR/11/11 PRO/ 11 PRO MAX/12/12 PRO/12 PRO MAX/12 MINI/13/13 Pro/13 Pro Max/13 mini/14/14 Plus/14 Pro/14 Pro Max Face ID repair. 2. Replace the original dot matrix cable with new JC dot matrix cable. 3. Install and handle well the new replacement dot matrix cable. 4. Replace the dot matrix cable. 5. No disassembly of the original chip, encrypted data permanent storage, recover any time need. 7. Connecting to phone for breakdown code analysis. Read screen code to realize truetone repair without original screen. [ Optional boards for V1S ] : Battery detection board : Automatically read battery information, distinguish original or non-original, support to edit battery information Fingerprint board : Automatically read the phone's fingerprint serial number, support writing the fingerprint serial number into JC home button Dot projector detection board ( to launch soon ): Dot projector data read and write Features: Support to detect whether the face matrix is normal, fusing, NTC disconnection, IC disconnection, short circuit, etc. Dismantling, compatible with all brands dot projector chips / cables. Unique design, read phone directly without dismantling, compatible with all brands dot projector chips/cables. Supported Models: iPhone X-14 Pro Max / iPad A12X. Support dot projector data read and write. Collocating with JC dot projector flex cables to perfectly repair face ID "Move higher, move lower" problem for full series models. Perfect coordination of the 3 buttons to fulfill easy detection, read and write. PC free to work separately for read and write, also support data backup to PC by work on JC repair assistant. For V1S regular users, just connect to PC and update the software on JC Repair Assistant, then could obtain the dot projector repair function.
- Solar Garden lamps 30 W / 50 W; - Housing: Die Casting Aluminum; - 16 V / 40 W / 50 W / solar panel ; - Ternary Lithium Battery 12.6 V / 14 Ah / 22 Ah; - Philips LED chip SMD 180 pcs / 240 pcs; - Light Size: OD 500/605 mm, H 170 mm, Case Mounting Tube: ID 65 / 76 mm; - Control Mode: Light Control / Radar Sensor/ Time control ; - charging time 6 to 8 hours, Lighting time 12 hours;
Item UL-SP38121 Power 12W Equal to common halogen lamp 120W Lighting Source Bridgelux High Power 1W LED Chip Quantity 12pcs warranty time 2 years Dimension ¦µ120*127mm Working Voltage 85-265 V Luminous flux 960-1080 lm Color temperature Warm White: 2800-3200 K Pure White: 4000-4500 K Cool White: 6000-6500 K Material Aluminum alloy + PMMA Lense Viewing angle 15¡ã, 30¡ã, 45¡ã, 60¡ã, 90¡ã, 120¡ã Color Rendering Index >75% Power Factor ¡Ý 0.80 Life-span ¡Ý 50,000 hrs Protection rating IP54 Working temperature -30~55¡ãC(- 22~122 ¡ãF) Warranty 2 years Certification CE, RoHS and UL pending Payment term T/T, Western Union. customized package.
Wireless security home alarm system(5120) Description: 1, Wireless alarm system with digital screen and time display, 2, Home Alarm system built-in 120 wireless defence zones 3, Security alarm system with four groups of timer arm /disarm 4, Auto-dial 9 groups telephone number when alarming Features: 1) Digital screen with time display, can set up 2 groups clocks alarm, and alarm time setting function. 2) Built-in 120 wireless defence zones, each zones with their unique usage support 8 types of defense zones. 3) Four groups of timer arm /disarm 4) Auto-dial 9 groups telephone number when alarming, 5) 10seconds customize message record, When the system calls out, it will play the voice message you recorded, which let you or other people know where alarm 6) Different place remote control function, arm/disarm /monitor by phone. 7) Wireless intelligent study coding, compatiable with PT2262, maximum 100PCS remote controller and 150PCS sensor. 8) With high accuracy clock chips, and punctual timing black box function, can record alarm history, 72 PCS arm/disarm records and 102PCS alarming history, also show when and where alarm Specification: Input voltage: DC9V-12V Standby current: < 25mA Alarm current: < 450 mA Wireless frequency: 315/433/868/915MHz, 2262/1.5-4.7M, EV1527/300K Back-up battery: NI-HI AAA*6 DC7.24V Siren volume: 110dB Accessories parameter: This burglar alarm can support both PT2262 and EV1527code. When use PT2262 code, timeing resistor is suggested 1.5M to 4.7M, If use EV1527 code, timing resistor is 300K. It is suggested to use 1010data code. Standard package: 1 man panel, 1 infrared (motion) detector 1 wireless door magnetic detector 1 siren, 2 remote controllers, 1 power supply. Neutral gift box.
Cree LED chip Anticorrosion grade wf2; Explosion proof grade Exd CT6 start-up time less than 0.2S Osram driver for five years warranty Suitable for C type Explosive gas environment like electric power, petrochemical, chemical industry, steel, large facilities,etc.
Place of Origin Guangdong, China (Mainland) Brand Name Leomay Model Number LM-GU1008-3W Emitting Color: White Power: 3*1w Base Type: GU10 Warranty Time: 2 years Certification: CE/RoHS Led Chips Epistar Chips from Taiwan Led driver High quality led driver Heat dissipation New styly Aluminum shell with good effect of heat dissipation Package Color box Luminous Flux 300lm Color White Input Voltage 220v Life 50,000h. 1pc with bubble bag then into small box, suitable in a carton.
Quick Details Type:SMD LED Model Number:TC3535RGBF05-3CES Chip Material:InGaN Emitting Color:RGB Luminous Intensity:Customers' Requirements Luminous Flux(lm):R:600-800MCD G:1800-2200MCD B:500-700MCD Optical Attenuation(%):2% Power:0.2w Power Dissipation:2% Viewing Angle(°):120/140 Color Temperature:RGB Operating Temperature(:-40 - 150 Storage Temperature(:5 - 30 Place of Origin:Guangdong, China (Mainland) Brand Name:TCWIN Certification:CE, RoHS Product name:Smd Led Epistar Chip 3535RGB Chip Brand:Epistar Chip Warranty:3 Years Lifespan:50000H-100000H Voltage:R:2.0-2.2V / G:3.0-3.2V / B:3.0-3.2V Forward Current:60mA Size:3.5*3.5*2.8mm Color:Tri-Color(Red-Blue-Green) Packaging & Delivery Packaging Details Number of packages: SMD 2835 4000pcs/reel, SMD 5730 3000pcs/reel, SMD 5050 1000pcs/reel, SMD 5050 6000pcs/reel, SMD 3030 4000pcs/reel. 1reel / ESD bag. Vacuum packaging&Carton specifications: 470mm*430mm*230mm, 455mm*215mm*255, 230mm*200mm*235mm Bronze bracket surface mount 2835 white LED diode with super brightness Delivery Time:2-10 working days SMD LED
1.Voltage:dc12v 2.Life span: more than 10, 000 hours 3.Led type:high power creep chip 4.Working temperature: below 40 degree to 105 degree 5.Continuous working time should not exceed 36 hours Http://hz.Aliexpress.Com/store/1839013 Package:2pcs/lot Weight:80g Dimensions:12cm x 12cm x 5cm
