The AEC1112- Computerized Universal Testing Machine with a maximum load capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton with the provision of testing various samples of metals and its different alloys for the testing in tensile mode for round and flat specimens as per the national and International standard like ASTM, DIN, ISO, EU and IS standards etc. capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton.
1.Model:WDW-100 2.Product name:computerized electrical universal testing machine 3. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 4. Features of testing machine 1) Adopting aluminum alloy cover, with attractive streamline structure 2) Mainly used to test mechanical properties for metal, non-metal and composite materials 3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched 6) With functions of automatic return to original position, intelligently, efficiently, quickly 7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe 8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control 9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison. 5.Spec. of testing machine
Main function and characteristic: This machine adopts hydrocylinder underneath type, the assembly key of oil-fountain-oil-pump motor setíóflooding valveíóchange-direction valve are the brand products, the computer measure display of amplifier is ourselves produce, in good interface. It can display test forceíótest force peak valueíóloading speed. It according with the requirements of the standard of< GB/T228-2002 Metallic materials- Tensile testing at ambient temperature>,it used do tensileíópressureíóbending and cutting for metal and non-metal materials. Main Technical Parameters: Max. test forceú¦ 1000kN Scope of test force measureú¦4-1000kN Accuracy of measure test forceú¦í+1% Journey of piston ú¦ 250mm Max. journey speed of pistonú¦50mm/min Displacement measure distinguishú¦ 0.01mm Deformation measurementú¦Four-shelves measure, each shelf full measuring span of 20%, í+0.5%FS Max.tensile spaceú¦750mm (Include piston journey) Max.pressure spaceú¦ 580mm Thickness of flat specimenú¦ 0-40 mmú+ Dia. Of round specimenú¦ ª¦13-ª+60mm Size of platenú¦ ª+160mm Distance of bending testing rollsú¦60mm-700mm Width of rollsú¦ 140mm Beam travels speed about: 120mm/min Mode of clampú¦Hydraulic pressure clamp Size of outlineú¦ 1000í-700í-2350mm
Equipment summary: RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ±1% / the value ±0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:±0.5% / tolerance: ±0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Driving mode: precision lead screw, not gear wheel Micro-computer controls, LCD displays data, results and curves. Professional software supports, controlled by microprocessor in all process of testing. Each function worked independently, standard unit, free form manual intervention. Analyzes group of specimens shows the arithmetic average, maximum, minimum. Menu interface, shortcut for selecting test, and easy to learn, master, and operate. Print out results, including stretching rate, maximum pulling, stiffness an flexibility. High performance DC servo-system, adjust speed by servo-system, working quiet, stability and reliability. Parameters stored permanently while power down and protection for over-load. Standard ink-jet printer prints out test reports. Energy-saving, stillness running, high performance and low cost. DRK101A: specification: 0.01; 0.05; 0.1; 0.2; 1(kN) Load accuracy: 1 grade Speed: 1 to 500mm/minute Strength precision: 1/100000 Stretch space: 400mm Power: 0.4kW DRK101B: specification: 0.01; 0.05; 0.1; 0.2; 1(kN) Load accuracy: 1 grade Speed: 1 to 500mm/min Strength precision: 1/100000 Stretch space: 700mm Power: 0.4kW DRK101C: specification: 0.01; 0.05; 0.1; 0.2; 1;5 (kN) Load accuracy: 1 grade Speed: 1 to 500mm/min Strength precision: 1/100000 Stretch space: 900mm Power: 0.5kW DRK101D: specification: 0.01; 0.05; 0.1; 0.2; 1;5 (kN) ·+Computer controled ·¼ Load accuracy: 1 grade Speed: 1 to 500mm/min Strength precision: 1/100000 Stretch space: 900mm Power: 0.5kW Standard Wooden Package
Tensile tester Flexible, sophisticated and useful for quality assurance testing, process evaluation, material & component evaluation, validating product performance Can be used as stand alone unit or linked up to pc or printer for hard copy or data storage. Wide range of testing like tensile, compressive, shear, bending cyclic can be undertaken. Useful for testing of springs, rubber, plastics, filaments, papers, foils Range : 1 kg to 10 tonnes available in various models
We have been in this line for many years, our products is very competitive and resonable . Wooden cases, 100kg, 620x460x1530
Supplier: Universal Testing Machines
1. Size of concrete specimens for compression strength test Concrete cubic specimen: 150X150X150mm, 100X100X100mm, 200X200X200mm Cylindrical concrete specimen: diameter 150X300mm, diameter 100X200mm, diameter 200X400mm 2. Brief introduction of concrete compressive strength test procedure 1) Placing the concrete specimen---place the test specimen on the lower bearing block. Carefully align the axis of the specimen with the center of thrust of the spherically seated block. 2) Apply the load continuously and without shock until the specimen fails and record the maximum load carried by the concrete specimen during the test. Note the type of failure and the appearance of the concrete. 3.Relative test method GB/T 50081 standard for test method of mechanical properties on ordinary concrete ASTM C39 standard test method for compressive strength of cylindrical concrete ASTM E74 practice of calibration of force-measuring instruments for verifying the force indication of testing machine 4. Specifications for concrete compressive strength testing machine Max. capacity: 3000KN( lower or higher capacity can make to order) Grade of testing machine: grade 1 Distance between upper and lower compression platen: 320mm Stroke of piston:50mm Size of upper and lower compression platen:375X375mm Weight :about 900kg
