Supplier: Adhesive C5 Resin
C5 aliphatic hydrocarbon resin for hot melt adhesives C5 Hydrocarbon resin is playing gradually more and more important role as tackifier in the adhesive and sealant industry, especially in the application of hot melt adhesive and pressure sensitive adhesive. The series of petroleum resins product are a category of C5 aliphatic hydrocarbon resins applicable for hot melt adhesive and pressure sensitive adhesive. These products have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, Ethylene Vinyl Acetate (EVA) and styrenic block copolymer such as SIS, SBS, SEBS, SEPS. Additionally, they also have a good compatibility with the natural tackfying resins such as terpene, rosin and thereof derivatives. At the same time, all the properties of adhesive can be improved in various degrees by the application of these C5 petroleum resins. In recent years, C5 petroleum resins are gradually replacing the natural resin tackfier(such as terpene and rosin) due to its advantages of high deep strength, fast tack, stable adhesion performance, moderate melting viscosity, high thermal resistance, good compatibility with polymer basis, economic price. Good fluidity which can improve the wetting property of master material. Excellent initial adhesion performance Super aging resistance performance Light color material Transparent, little smell and low volatility material Application field: hot melt adhesives, solvent base adhesives, adhesives, sealants, glue etc
product description: C5/C9 copolymer resin is a kind of thermoplastic resin produced by pretreatment, polymerization, distillation and other processes of C5 and C9 fractions produced by petroleum cracking. It is not a high polymer, but a low molecular weight between 300-3000. Polymer. It has the advantages of C5 petroleum resin and C9 petroleum resin. It has the characteristics of low acid value, good miscibility, water resistance, ethanol resistance and chemical resistance. It is chemically stable to acid and alkali, and has the characteristics of good viscosity adjustment and thermal stability. Since the structure does not contain polar groups, it has good water resistance, acid and alkali resistance, weather resistance and light aging resistance. It has good solubility in organic solvents, especially in petroleum solvents, similar to other resins. The compatibility is very good, and it also has brittleness, viscosity increasing, cohesiveness and plasticity. It is generally not used alone, but as an accelerator, regulator, modifier and other resins.ã?? Product application areas: C5/C9 copolymerized petroleum resin is used in hot melt adhesives, synthetic rubber, adhesives, paints, rubber soles, tires, etc., and is suitable for high-demand rubber products such as radial tires. It can not only increase the adhesion between the rubber particles, but also It can improve the adhesion between the rubber particles and the cord. In the field of hot melt adhesives, adhesives, and adhesives, C5/C9 copolymerized petroleum resin can not only provide better initial viscosity, but also can be used like rosin resin. To adjust the durability and bonding strength of the glue and resin mixture. It can be used as a substitute for terpene resin, rosin glyceride, etc.
Resins characters: Light colored and transparent granule Make the initial adhesion performance; cohesive strength and peel strength reach the best balance Super aging resistance performance Good fluidity which can improve the wetting property of master material. Narrow molecular weight distribution Low volatility and no odor Excellent compatibility with cinnamene copolymers (such as sis, sbs, sebs and seps), nr, sbr, eva and natural sticky resins(such as terpene, gum resin and its ramification). Application: Hot melt adhesive, solventborne adhesive, pressure sensitive adhesive, rubber compounding, tyre.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
C5 petroleum resin C5 petroleum resin used for hot melt pressure sensitive adhesives (yh-1288; yh-2315;hh-1212) 25kg/bag or export paggage
Tr5100 hydrocarbon resin is a low molecular weight aliphatic hydrocarbon resin that has been designed for hot melt road marking system. It can enhance the adhesion and hardness of road marking paint, and make paint in stable situation in the four seasons. Application: hot melt road marking paint Features of tr5100 in hot melt road marking: Light color Good fluidity High anti-fraction Even distribution of filling material without sedimentation. Good heat stability Fast drying speed Good weather resistance, adhesive force and stain resistance.
C5 Hydrocarbon resin is a pale yellow C5 aliphatic hydrocarbon resin having excellent color, flow, and heat stability and thus highly recommended for Hot Melt Road Marking Paints FEATURES: Light Colour Gradient - Excellent Fluidity- Better Heat Stability - High Drying Rate and Anti - Abrasion Outstanding affinity for pigments Superior Process Ability Strong dirt-resistant
C5 petroleum resin is an aliphatic petroleum resin widely used in tire rubber mixing. It has good compatibility with natural rubber (NR), synthetic rubber, polyethylene, SIS, SEBS, EVA, etc., and is tackified with natural Resins (such as terpenes, rosin and their derivatives) are also compatible.In rubber mixing, it can be used as tackifier, reinforcing agent, softener, filler, etc. In rubber mixing 1. It has excellent viscosity increasing 2. It can play a role of softening and strengthening during processing, improving tretchability and peeling resistance 3. Significantly improving the stickiness, but does not affect the vulcanization time and after vulcanization The physical perties of 4. Avoid adhesion to processing machinery 5. Help the filling material to be evenly distributed 6. The color is moderate Application areas: Other rubber products, such as tires, shoe soles, heels, floors, belts, rubber tubes, inner tubes, light-colored rubber daily necessities, etc.
