A.Plastic Raw Materials:PVC,CPVC,PP,HDPE,LDPE & LLDPE,EPS ,GPPS,HIPS PET,ABS,PMMA,PC,PA66 etc B.Plastic Additives:Tio2,Stearic Acid ,PE Wax,DOP, Lithopone ,Barium SulphateMasterbatch Series and Water treatment etc.
A.Plastic Raw Materials:PVC,CPVC,PP,HDPE,LDPE & LLDPE,EPS ,GPPS,HIPS PET,ABS,PMMA,PC,PA66 etc B.Plastic Additives:Tio2,Stearic Acid ,PE Wax,DOP, Lithopone ,Barium SulphateMasterbatch Series and Water treatment etc.
SABIC LLDPE / LDPE/HDPE/OFF GRADE MATERIAL Available For Immedieate Shipment
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.
Application: DS7601 application on PP, textiles, fabrics. Composition: Polypropylene synthesis Pipe grade
We manufacture HDPE, LDPE, and LLDPE reprocessed and recycled granules in various colors mainly in black color. We are well-reputed recycling firm based in Pakistan. We got the experience of three decades in the plastic recycling industry. We supply premium quality HDPE, LDPE, and LLDPE reprocessed and recycled granules. We produce polyethylene granules in bulk and have the capacity to supply larger quantities of the materials. Being the closest substitutes for virgin resin, these materials are very cost-effective. Our granules could minimize the consumption of exorbitantly high-priced virgin resin. Our HDPE, LDPE, and LLDPE materials have a vast range of applications. Applications: - Blow Film Extrusion: Agriculture Plastic Mulch Film (LLDPE Black Mulch Film) Garbage Bags Dog Poop Bags Polyethylene Shopping Bags Other Film Extrusion Products Polyethylene Pipes and Fittings: HDPE Pipes and Fittings (Closest Substitute for PE 100 and PE 80 Resin) LLDPE Pipes LDPE Pipes Drip Irrigation Systems Drip Irrigation Pipes and accessories MDPE Pipes and Fittings Geosynthetic Products: Geomembrane liners (HDPE Liners, LDPE Liners, and LLDPE Liners) Geocells Geonets Geogrids Geocomposites Other Geosynthetic Products
MATERIAL : LDPE/LLDPE RPG CATEGORY : LDPE/LLDPE TYPE : Pellet GRADE : Natural SPECIFICATION : "LDPE/LLDPE RPG(BLOW FILM GRADE, NATURAL) MIN 2X40'HC PER MONTH WITH REGULAR BASE MFI : 0.9 ~ 1.2 TENSILE STRENGTH : 10 ~ 12 MPA ELONGATION : MIN 850% MOISTURE : LESS THAN 0.5%" ORIGIN : Korea LOADING WEIGHT : 23 FOB (USD/Ton) : $950-1150
LLDPE Recycled Pellet AAA Plastic Material For Sales MATERIAL : LLDPE recycled pellet AAA (with PCR certificate) CATEGORY : LLDPE TYPE : Recycled pellet GRADE : AAA (with PCR certificate) SPECIFICATION : LLDPE repro pellet with PCR certificate (Post Consumer Plastic Recycled supplier). Natural color, film grade ,regular supply, Malaysia origin. TDS included. ORIGIN : Malaysia LOADING WEIGHT : 27 Tons FOB (USD/Ton) : 1050-1250
