Please quote for the following wholesale product requirement - Product Name: Refuse-Derived Fuel (RDF) and Solid Recovered Fuel (SRF) Specifications: for use in cement kiln Fuel Specifications: Calorific Value: 10,000 K. Cal/KG Chlorine Content: 0.2% Mercury Content: 0.02 mg/MJ Moisture Content: 10% Ash Content: 5% Sulphur Content: â?¤ 1% Size of Bale: side 1-1.2 * 1-1.2, with a length of about 1-1.5, tied with wire and wrapped with plastic film Could you please provide us with the following information: 1. Best pricing per ton of RDF and SRF. 2. Minimum order quantities. 3. Delivery timelines. 4. Any additional certifications or quality assurances that accompany the product. MOQ Quantity Required : MOQ Shipping Terms : CIF Destination Port : Pakistan, Pakistan Payment Terms : LC Looking for suppliers from : Worldwide Contact : Muhammad Haroon Saleem
The buyer would like to receive quotations for - Product : Bitumen And Fuel Oil Specifications: Quantity:200#Bitumen, 3000MTS per month Product: 60/70# Bitumen, 3000-5000MTS per month, for Nansha or Maomin port; Quantity Required : 3000 Metric Ton/Metric Tons Shipping Terms : CIF Destination Port : Qindao Or Tianjing Port, Nansha Or Maomin Port;, China Payment Terms : To be discussed with suppliers Looking for suppliers from : Worldwide Contact : Hossain Rokhsun
Supplier: Diesel oil en590 ulsd ppm10, jet a1 fuel, diesel gas d2, mazut m100/99, aviation kerosene colonial grade 54, virgin fuel oil d6, export blend crude gost 51 858 2002 / gost 9965 76, liquefied petroleum gas (lpg), liquefied natural gas (lng), fuel oil cst 180, urea 46% prilled & granular, sulphur granular, diesel gas oil ultra low sulphur diesel, petroleum coke, light cycle oil (lco), bitumen grade 60/70 and 80/100, automotive gas oil (ago).
Services:
Buyer: Diesel oil en590 ulsd ppm10, jet a1 fuel, diesel gas d2, mazut m100/99, aviation kerosene colonial grade 54, virgin fuel oil d6, export blend crude gost 51 858 2002 / gost 9965 76, liquefied petroleum gas (lpg), liquefied natural gas (lng), fuel oil cst 180, urea 46% prilled & granular, sulphur granular, diesel gas oil ultra low sulphur diesel, petroleum coke, light cycle oil (lco), bitumen grade 60/70 and 80/100, automotive gas oil (ago).
Please quote for the following wholesale product requirement - Product Name: EN590 10ppm and JETA1 Fuel Oil Specifications: Quantity : Minimum 100.000 Tons 1. Buyer Issues ICPO: We will issue an official Irrevocable Corporate Purchase Order (ICPO) addressed to the refinery or their authorized representative. 2. Seller Issues CI: You will issue a Commercial Invoice (CI) which we will sign and return. 3. Seller Provides Partial POP: You will provide the following partial Proof of Product (POP) documents: -ATSC: Authority to Sell and Collect -DTA: Dip Test Authorization -Product Passport: Product analysis report from a renowned inspection company (e.g., SGS, Intertek) -Statement of Product Availability: Duly signed and notarized by appropriate authorities. -Commitment Letter to Supply -ATV: Authority to Verify the existence of the product via email or phone call. 4. SGS Inspection & Tank Extension: You will submit a fresh SGS inspection report for the product in your storage tanks. We will review this report and reserve the right to conduct our own inspection at our expense. Upon successful inspection, we will request a tank extension for an appropriate period. 5. Dip Test & Product Transfer: A successful dip test will be conducted in your tanks. We will then take the product from your tank, or you can inject it into our designated vessel/tank. After a final quality and quantity (Q&Q) dip test, we will make the full payment as per the SGS report. 6. Full Payment: Payment will be made for the total value of the product based on the SGS report after successful product transfer and final dip test. 7. Title and Export Documents: Upon receiving payment, you will provide us with the title of ownership for the product and all necessary export documents. 8. Intermediary Fees: You will be responsible for the payment of any intermediaries involved in the transaction. Quantity Required : 100000 Ton/Tons Shipping Terms : FOB Destination Port : Rotterdam, Other-Not Shown Payment Terms : LC Looking for suppliers from : Worldwide Contact : Masaro Consulting
Buyer is interested to receive quotations for the following RFQ - Product Name: Fuel Specifications : Type: Diesel EN590 10ppm, JET Fuel A1, Crude Oil Packaging Terms : Customized Quantity Required : MOQ Shipping Terms : CIF Or FOB Destination Port : ASWP, Payment Terms : L/C Or T/T Looking for suppliers from : Worldwide Contact : Mark Adams
Supplier: Petrochemical : base oil / furnace oil / mho / cst range/ used engine oil / bitumen,
bio diesel : used cooking oil / specially blended soybean / canola oils for industrial use (insultating oil) / cnsl (cashe nut shell liquid)
automotive & industrial oils & lubricants (manufactured to every specific blend / brands )
waste food solutions
aluminum used beverage cans (ubc) / aluminum ingots
Services: Logistics team can provide with prices based on ex tank in uae, fob in uae seaports and cif to the destination port of the buyers.
we can arrange to supply in flexitanks (20ft container), ibc tanks and drums (208 litres)
Buyer: Base oil / used engine oil / used cooking oil
Please quote for the following wholesale product requirement - Product Name : Heavy Fuel Oil Specifications : Specifications: Heavy Fuel Oil cSt180 with 2% max Sulphur and aligned to country specific standards. Viscosity @50 oC, cSt, max. 180 ASTM D445 2) Density @ 20 oC, kg/l, max. 0.990 ASTM D1298 3) Conradson carbon residue, % wt., max. 15 ASTM D189 4) Sulphur content, % wt., max. 2 ASTM D4294 5) Vanadium content, mg/kg, max. 200 IP 501 6) Asphaltenes, % wt., max. 10 IP 143 7) Ash content, % wt., max. 0.12 ASTM D482 8) Sodium content, mg/kg, max. 1/3 vanadium IP 501 9) Water content, % vol, max. 0.5 ASTM D95 10) Pour point, oC, max. 15 ASTM D97 11) Flash point, oC, min. 66 ASTM D93 12) Aluminium silicon+ silicon, mg/kg, max. 50 ASTM D5184 13) Net calorific value, MJ/kg, min. 40.5 ASTM D 4868 14) CCAI (calculated carbon aromatic index) To be reported ISO 8217 15) Nitrogen content, % wt., max. 0.4 ASTM D3228 16) Sediment by extraction, % wt., max. 0.15 ASTM D473 Quantity : 20-25KT Quarterly Quantity Required : 20 - 250000 Ton/Tons Quarterly Shipping Terms : CIF Destination Port : Mombasa Port, Kenya Payment Terms : 60 days ex BL date covered by DLC Looking for suppliers from : Worldwide Contact : George
Please provide a quotation to the following requirement from importer - Product Name: Fuel Specifications: type: Jet A-1:180.000 MT HSFO : 180,000 MT Quantity:as above Quantity Required : 360000 Metric Ton/Metric Tons Shipping Terms : CFR Destination Port : Chattogram, Bangladesh Payment Terms : Payment by 90 days sight LC yo be confirmed by top 50 world bank Looking for suppliers from : Worldwide Contact : Samial Abedin
Buyer: Oil Gas, Jet Fuel, En590, Sugar.
