BR Uniaxial Geogrids are meshes with elongated apertures made from high density polyethylene (HDPE) and generally used as reinforcement of walls and slopes. Their principle characteristic is good creep performance with low strain and high strength under constant load Properties Polymer: High Density Polyethlene: Polymers and master-batch for the production of Geogrids have been strictly tested and selected and performance confirmed in the company's Research and Development Laboratories. Production is tested and quality controlled in strict accordance with international standards and stable properties are guaranteed. Resistance to Ultra-violet light: A high level of resistance to U-V light is given to geogrid Products by the incorporation of not less than 2% of weathering-grade carbon black, well dispersed in the polymer matrix. These products may be used for many years in exposed conditions. Chemical and Biological Resistance: Uni-axial Geogrids are manufactured from High Density Polyethylene which is unaffected by all chemicals, including acids, alkalis and salts, normally found in soils. Also, it is not a nutrient, therefore these products are not affected by micro-organisms in soil. Creep Performance: A good creep performance under sustained loading is essential for the use of geogrids in critical structures such as walls, abutments and steep embankments. we maintains constant Creep testing programmes in its laboratories and works closely with National and International experts in the performance of geogrids to ensure that its products meet the strictest demands in all markets. bulk
"Geogrid is a type of geo-synthetic material that is used in a variety of construction and engineering applications. Geogrid is made from a variety of materials, including polypropylene, polyester, and nylon. There are a number of reasons why geogrid is used in construction and engineering applications. Geogrid can be used to reinforce soil, gravel, and asphalt. It can also be used to stabilize slopes and embankments. Geogrid can also be used in drainage applications. There are a number of different geogrid manufacturers in India. Singhal industries private limited is one such manufacturer and exporter of geogrid to USA. Some of these manufacturers export their products to other countries. The said company is a manufacturer of ISO 9001:2015 certified."
Polyester geogrid is an excellent geosynthetic made from high modulus polyester yarns. Polyester geogrid has excellent heat resistance and good resistance to long term degradation. It has good rutting resistant performance under high temperature. Polyester geogrid has a compact woven fabric structure. This structure constitutes a grid reinforcement system which exerts strong adhesive forces on the subgrade. Polyester geogrid can effectively enhance the bearing capacity of ground. Compared with fiberglass geogrid and plastic geogrid, polyester geogrid has better performance. It has stronger adhesive force and better corrosion resistance. This product can effectively prevent soil erosion and water loss. Polyester geogrid is very flexible and easy to install. It is commonly used to reinforce the subgrade structure of railroad, subway and highway. Features: Light weight. High tensile strength. Strong adhesive force. Good reflective cracking resistance. Good fatigue cracking resistance. Good corrosion resistance. Good resistance to long term degradation. Applications: Extensively used in the railroad, subway and highway construction. Commonly used in the reinforcement of subgrade, roadbed, slopes, embankment and retaining walls.
Uniaxial geogrid is a kind of geosynthetics. This product is designed for roadbed and pavement improvement. It is characterized by a one-way stretch structure. This unidirectional structure forms a compact interlock system. Uniaxial geogrid has good flexural stiffness and high strength. It can effectively reinforce soil structure and prevent soil from displacement. Uniaxial geogrid largely increases the durability of subgrade structure and prolongs the road life. Uniaxial geogrid can greatly reduces aggregate fill thickness. It provides a cost-effective solution for civil engineering and geotechnical projects. Uniaxial geogrid is suitable for various soil types and climate conditions. It performs well in preventing slope and road from landslide and subsidence. Uniaxial geogrid is widely applied roadbed stabilization, pavement improvement, retaining wall and bridge abutment reinforcement. Features: High tensile strength. Small deformation. Good creep resistance. Good installation damage resistance. Good long term degradation resistance. Quick installation. Applications: Used in the reinforcement of soft soil, roadbed, pavement, retaining wall, slope, working platforms, parking lots, bridge abutments, embankment, and so on. Used in the paving of roads, railway, highway.
Biaxial geogrid is a type of geogrids. It is made from high polymer. Biaxial geogrid has high strength in both longitudinal and transverse direction. It is made through the process of extruding, sheet forming, punching and stretching. Biaxial geogrid has good bearing capacity. It can enhance soil structure and prevent soil erosion. This product is often used to prevent the road from reflective and fatigue cracking. Biaxial geogrid can effectively improve the long term durability of subgrade and greatly reduces road maintenance costs. Biaxial geogrid has good resistance to long term degradation. It is suitable for various applications, such as embankment reinforcement, wall reinforcement, soil stabilization, slope protection and other permanent load bearing foundation reinforcement. This is a common biaxial geogrid specifications list. Other specifications can be customized according to your specific requirements Features: Good bearing capacity. Stable aperture size. High elastic modulus. Small deformation. High junction efficiency. Quick installation. Low maintenance costs. Applications: Used in the reinforcement of parking lots, haul roads, landfills and airport runways. Used to enhance the bearing capacity of railways and highways, etc. Used to reinforce the durability of buildings and constructions. Used to prevent landslide and ground subsidence.
Triaxial geogrid is a unique type of geogrid. This product is made from high-density polyethylene. Triaxial geogrid has a stable triangular structure. Based on the stable triangle form, its multi-directional structure is an innovation. This triangular structure can provide an enhanced bearing system, which can reduce the thickness of layers. For example, the application of triaxial geogrid in asphalt pavement can greatly reduces the layer of asphalt. Triaxial geogrid has good creep resistance and high tensile strength. It can greatly improve pavement performance and extend the service life of ground. Compared with uniaxial geogrid and biaxial geogrid, triaxial geogrid has higher in-plane stiffness and better bearing capacity. This product has a high efficiency in distributing loads. It can effectively prevent the ground from rutting, cracking and subsiding. Triaxial geogrid provides a cost effective solution for geotechnical engineering. It performs well in the reinforcement of soft soil, roadbed, subgrade and retaining wall. Triaxial geogrid specifications: Material: polyethylene yarn. Rib section shape: rectangular. Aperture shape: triangular. Triaxial geogrid shape: hexagonal triaxial geogrid and quadrangular triaxial geogrid Roll sizes m (ft.): 3.0 ã? 75.0 (9.8 ã? 246); 4.0 ã? 75.0 (13.1 ã? 246). Features: Stable triangular structure. Small deformation. Excellent bearing capacity. Good resistance to chemical degradation. High in-plane stiffness. High junction efficiency. Applications: Applied in soil stabilization and embankment reinforcement. Used to enhance retaining walls, slopes, subgrade, pavement and so on.
Uniaxial geogrid is a kind of high strength geosynthetics which take high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radition and anti-aging. Through directional stretch, the original scattered chain molecule will be realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation is only 4-10%, which nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Tensile Strength (KN/M) Tensile Strength @ 2% Elongation (KN/M) Tensile Strength @ 5% Elongation (KN/M) Elongation (%) Carbon Content (%) Width (M) TGDG50 í¦50 í¦12 í¦23 í_12 í¦2.0 2.0 TGDG60 í¦60 í¦16 í¦30 TGDG80 í¦80 í¦21 í¦40 TGDG110 í¦110 í¦29.5 í¦58 TGDG130 í¦130 í¦36.5 í¦72 TGDG170 í¦170 í¦50 í¦99 Standard package or as customers' requirements
Uniaxial geogrid is a kind of high strength geosynthetics which take high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radiation and anti-aging. Through directional stretch, the original scattered chain molecule will be realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation is only 4-10%, which nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Tensile Strength (KN/M) Tensile Strength @ 2% Elongation (KN/M) Tensile Strength @ 5% Elongation (KN/M) Elongation (%) Carbon Content (%) Width (M) TGDG35 í¦35 í¦10 í¦22 í_10 í¦2.0 2.5 TGDG40 í¦40 í¦11 í¦24 TGDG50 í¦50 í¦12 í¦28 TGDG60 í¦60 í¦14 í¦34 TGDG80 í¦80 í¦26 í¦48 TGDG100 í¦100 í¦35 í¦68 TGDG110 í¦110 í¦38 í¦75 TGDG120 í¦120 í¦43 í¦82 TGDG130 í¦130 í¦47 í¦90 TGDG150 í¦150 í¦57 í¦120 TGDG160 í¦160 í¦60 í¦124 TGDG180 í¦180 í¦64 í¦130 TGDG200 í¦200 í¦74 í¦145 TGDG220 í¦220 í¦80 í¦156 TGDG260 í¦260 í¦94 í¦185 Standard package or as customers' requirements
Biaxial geogrid is a kind of high strength geosynthetic which takes high molecular polymer as main raw material, and adds the additives of anti-ultraviolet radition and anti-aging. Through directional stretch, the original scattered chain molecule is realigned at linear state. According to physical characteristics of high molecular polymer, under the condition of certain temperature control, plastic geogrids are stretched at certain direction, so they have high tensile strength at this direction. Their tensile strength is 100-200 Mpa and elongation nearly approach the level of mild steel and they have much advantages over traditional and present reinforcement materials. So they are a quite ideal geosynthetics for strengthening civil engineering and reinforcing road base. Specification Longitudinal/ Transverse Tensile Strength (KN/M) Longitudinal/ Transverse Tensile Strength @ 2% Elongation (KN/M) Longitudinal/ Transverse Tensile Strength @ 5% Elongation (KN/M) Longitudinal/ Transverse Elongation ú¿%ú¬ TGSG1515 í¦15 í¦5 í¦7 í_15/13 TGSG2020 í¦20 í¦7 í¦14 TGSG2525 í¦25 í¦9 í¦17 TGSG3030 í¦30 í¦10.5 í¦21 TGSG3535 í¦35 í¦12 í¦24 TGSG4040 í¦40 í¦14 í¦28 Standard package or as customers' requirements
Yingfan high-density polyethylene (HDPE) uniaxial geogrid is a high-performance soil reinforcement product to resist elongation when subjected to heavy loads for long periods of time. They allow quicker construction and lower construction cost. (Please note that the price is not stable due to raw material (influenced by oil price) and exchange rate.) Product Features - Stabilization Reinforcement - Good chemical resistance - Durable and highly resistant to chemicals, UV radiation, etc. Usage Areas - Municipal roads, Railway ballast, and highway - Industrial shipping yards - Parking lots, steep slopes - Retaining walls, bridge abutments... and more Standard Size - 3/4/6 m width - 50-100 m length - Upon request
