Material: 100% virginal silicone rubber Quality: Food Grade Size: 2mm x 4mm, 4mm x 6mm, 4mm x 7mm, 5mm x 8mm, 6mm x 9mm, 5mm x 9mm, 8mm x 12mm, 33mm x 45mm, etc Package: cartons
Description of Platinum Cure Silicone Foams Platinum Cure Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. HY-F663 Platinum Silicone Foams expands 3.5 times its original volume and develops a uniform 20 lb./cu. ft. cell structure (320 kg/m3). Vibrant colors can be achieved by adding Silc-Pig Typical Applications for Platinum Cure Silicone Foams Platinum cure Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening.
Platinum Cure Silicone Foamsfor filling Description of Platinum Cure Silicone Foams for filling Platinum Cure Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. HY-F663 Platinum Silicone Foams expands 3.5 times its original volume and develops a uniform 20 lb./cu. ft. cell structure (320 kg/m3). Vibrant colors can be achieved by adding Silc-Pigsilicone color pigments. Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation. Typical Applications for Platinum Cure Silicone Foams for filling Platinum cure Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening. Technical Parameters Product HY-F663 Appearance white Mix ratio(A:B) 1:1/10:1 Mixed Viscocity ï¼?mPa.sï¼? 15000±2000 Pot life/working time (mins) 5-8 Curing time/setting time (mins) 40 Shrinkage rate ï¼?%ï¼? 0.1 Approx. volumetric expansion 3.5 times Lbs./Cu. Foot=Kgs./Cu.meter 20 lb/ft3 = 320 kg/m3 PROCESSING RECOMMENDATIONS of Platinum Cure Silicone Foams for filling silicone products Store and use at room temperature (73°F/23°C). These products have a limited shelf life and should be used as soon as possible. Good room size ventilation is essential. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Cure Inhibition - Addition cured silicones may be inhibited by certain contaminants such as sulfur, polyesters,certain wood surfaces, epoxies, urethane rubber and tin catalyzed silicones resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of foam onto a non-critical area of the pattern.Inhibition has occurred if the matrerial is gummy or uncured after the recommended cure time has passed. This product will not cure against tin-based silicone rubbers. Applying A Release Agent - Silicone Foams will stick to some surfaces and a release agent may be necessary to facilitate demolding. When casting Silicone Foams into or over other platinum silicones, apply Ease Release 200 prior to applying foam. SHELF LIFE: 8-10 months when stored under 24â?? in original unopened packages. PACKAGE: Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail. -
Skin safe silicone rubber is a kind of platinum cure silicone non-toxic, odorless, which is perfect for touching human body directly, or making simulated human body or body parts. Its liquid rtv2 silicone rubber, part A and B, the mixture will be vulcanize in room temperature.
Description of platinum curing mould making liquid silicone rubber Addition cure silicone is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1. It can cure at room temperature as well as under heat. It's a kind of food grade silicone and mainly used for mold making. Application of platinum curing mould making liquid silicone rubber Silicone rubber is mainly used for making molds of tire, concrete stone, grc, polyurethane products; wax, candle decoration; rapid prototyping and tyre molds; chocolate, candy and similar products.
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould. Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance.
Platinum cure molding rubber silicone rtv Strenghts for platinum cure molding rubber silicone rtv Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould. Why platinum cure molding rubber silicone rtv Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance. It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed Features of platinum cure molding rubber silicone rtv 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic Datasheet of platinum cure molding rubber silicone rtv ModelColorMixing ratioPot life (mins)Demouled time (hrs)Hardness(a0)Tensile-strength (kgf/cm2)Tear-strength (kgf/cm)Viscosity (cps)Elongation (%) Hy-e625Translucent1 : 130-604±125±235±225±26000±3000=400 Hy-e630Translucent1 : 130-604±130±240±223±27000±3000=395 Hy-e635Translucent1 : 130-60 4±135±247±2 22±28000±3000 =470
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould. Features of platinum cure molding rubber silicone rtv 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic Why platinum cure molding rubber silicone rtv Silicone is the first choice of material when casting 3 dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high temperature resistance. It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It is available for making moulds that are poured, brushed or sprayed
Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould. Features of platinum cure molding rubber silicone rtv 1. Good characteristics of easy-operation 2. Light viscosity and good flowability 3. Low shrinkage 4. Favorable tension 5. No deformation 6. Favorable hardness 7. High temperature resistance, acid and alkali-resistance and ageing resistance 8. Food grade, non-toxic Datasheet of platinum cure molding rubber silicone rtv ModelColorMixing ratioPot life (mins)Demouled time (hrs)Hardness(A0)Tensile-strength (kgf/cm2)Tear-strength (kgf/cm)Viscosity (cps)Elongation (%) HY-E625translucent1 : 130-604±125±235±225±26000±3000?¥400 HY-E630translucent1 : 130-604±130±240±223±27000±3000?¥395 HY-E635translucent1 : 130-60 4±135±247±2 22±28000±3000470
Product Description Food grade liquid silicone is used to .candy, cake and cholocate and soap mold and making artificial stone,cement and gypsum. Food grade quality silicone with nontoxic,Excellent fluidity, high tear and tensile strength, High duplication times repeated use, easy to demould,High temperature resistance and cure can be accelerated by heat Model 6210 6215 6220 6225 6230 Mixing ratio (A:B) 1:1 1:1 1:1 1:1 1:1 Hardness (Shore A)â?¥ 10 15 20 25 30 Tear-strength (kgf/c m�²)â?¥ 16 18 20 21 22 Viscosity (A/B mixed 25�°C mpa.S) 8000�±2000 8000�±2000 10000�±2000 10000�±2000 10000�±2000 Shrinkagerate (%)â?¤ 0.1 0.1 0.2 0.1 0.1 Elongation(%) 500 480 450 450 400 How to use: 1.A and B must be mixed evenly into a clean plastic or metal container, The bottom and walls of the container must be scraped well to ensure that the silicone is mixed with the curing agent. 2.The pre-operation time of the mixed is 30-40 minutes at room temperature, and the product prototype is poured by vacuum defrosting.The product can be cured completely at room temperature of 3-4 hours and heated at 80-120�ºC for 30 minutes. 3. When pouring or brushing mold for medium or large products, it is recommended to pour or brush 2-3mm thick silica gel on the surface of the product to fully and completely contact with the prototype. Package: 10KG, 20KG, 200KG or according to customer requirements.
