EN590 10PPM (further grades upon request) originated and refined. 50,000 metric tons per month available. 12 month supply contracts available. $1.10 USD per liter INCLUDES CIF delivered to any port.
EN590 Diesel Fuel EN590 DIESEL FUEL PRODUCT ORIGIN: KAZAKHSTAN DELIVERY: CIF, FOB, TTO INSPECTION: SGS PAYMENT METHOD: TT, MT103, TRC20USDT Quantity. 100, 000MT per month for 13 months. Shipping Terms. CIF is possible, yes. Destination Port. Jurong Singapore possible
product Description : These Products are Exported with Stringent Adherence to Standard Russian Export Specifications with Respective GOST. Price of product ( USD price or FOB price) : Product will be priced in USD$ Based on an Appropriate PLATTS INDEX or a FIXED Price and the Agreed Upon Shipping Method. The Price will be Mutually Agreed to by Buyer and Seller Product origin : Russian Federation Key Specifications/Delivery/Logistics : 1. Certification SGC or Equivalent 2. Payment Terms = Letter of Credit ( Details to be agreed upon by Buyer and Seller 3. Delivery Time = Varies by Destination 4. Port of Loading = TBD Minimum Order Size & Contract Term : Minimum Monthly Quantity = 100,000 MT X 12 Month Contract Required with R & E up to 120 Months
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
(EN590) 10 PPM/50PPM Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 100,000MT The price and discount: - FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT FROM NWE PLATTS - CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
DIESEL FUEL OIL D6 Minimum Quantity : 25,000,000 Gallon Maximum Qty 50,000,000 Gallon FOB Price : $2.00 USD / Gallon CIF Price : $3.00 USD / Gallon Commission : $1 USD Seller side, $1 USD Buyer side Delivery Terms: CIF / FOB Shipment. Payment Term: MT103 TT Wire Transfer. Quality : Q&Q test report will be conducted at the loading port by SGS equivalent at the expense of the seller. Products Origin: KAZAKHSTAN. Contract Term: 12 Months minimum after first successful trial (with rolls and extensions). PORT OF LOADING: JURONG PORT, SINGAPORE, AKTAU, PAVLODAR, KURYK, FUJAIRAH, VLADIVOSTOK, ROTTERDAM AND HOUSTON PORT. Contact us for detail procedure of CIF/FOB/TTV/TTO.
SPECIFICATION of ULSD 10 ppm Diesel Fuel (EN590) Density at 15 0C Kg.m3 820-845 Polycyclic aromatic hydrocarbons EN 12916 wt% B Max Flash Point EN 2719 0C >55 Cold Filter Plugging Point CFPP EN 116 0C Winter Grade -15 Max Summer Grade 5 Max Distillation EN ISO 3405 Recovered at 250C Vol% 65 Max Recovered at 350C Vol%95% (Vol/Vol) Recovered at 0C 360 Max 85 Min Sulphur EN ISO 20846 EN ISO 20884 Mg/kg 10 Max Carbon Residue (on 10%residue) EN ISO 10370 wt% 0.30 Max Viscosity at 40C EN ISO 3104 Cst 2.0-4.5 Copper Strip Corrosion (3h a5 50C) EN ISO 2160 Fatty acid methyl ester(FAME) content EN 14078 Vol% 7.0 Max Cetane Number EN ISO 5161 EN 15195 51 Min Cetane Index EN ISO 4264 Calculated 46 Min Water EN ISO 12937 Mg/kg 200 Max Particulate Matter EN 12662 Mg/kg 24 Max Oxidation Stability EN ISO 12205 EN 15751 G/m3 H 25 20 Max Min Lubricity (wsd1,4) at 60C EN ISO 12156/1 Um 450 Max Quantity: Minimum 25.000 MT - Maximum 100.000 MT Origin: Kazakstan Loading Port: Gorgia Batumi Payments (SBLC or BG) via MT-760 unconditional, cashed back from top 25-30 world banks with sellers acceptable verbiage.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
